Diagnostics / S.M.A.R.T. Status / Information & Tests - self tests are broken

[w0w]

If I try to run any test on my drive selecting it from drop down menu, I always get "Invalid test type, bailing."
But if run it manually via command prompt, it works without any error message.

smartctl -t long /dev/ada0

smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 3 minutes for test to complete.
Test will complete after Sat May 25 20:37:34 2019

Use smartctl -X to abort test.

[jimp]

What version of pfSense are you using?

This was all recently rewritten on pfSense 2.5.0.

[w0w]

@jimp

2.5.0-DEVELOPMENT (amd64)
built on Mon May 27 19:17:27 EDT 2019
FreeBSD 12.0-RELEASE-p4

The system is on the latest version.
Version information updated at Tue May 28 21:01:04 EEST 2019  

[jimp]

Looks like one little bad variable reference. I'll have a fix in shortly.

[jimp]

https://redmine.pfsense.org/issues/9560

[w0w]

@jimp
Works now, thanks.