help with wan static address

  • Good afternoon,

    I'm new here, I've been studying a lot these days and I've made a lot of progress.
    I'm configuring my WAN in pfsense with static ip, but it does not work as expected.

    I changed the WAN settings this way:
    Static IPv4
    Disable IPv6
    Ip: 177.xx.xx.90
    And I added a new Gateway 177.xx.xx.89
    The mask provided by my ISP is, so I used / 30 I tried it too / 24

    The network card flashes slowly.
    When accessing the status interface it stays: no carrier

    These same settings on an ordinary router work normally.
    Another class of ip also worked ...
    If I provide another address on this network card it works, then this is not the problem ...
    Anyone know what it could be?


  • Rebel Alliance Moderator

    @Galbiere said in help with wan static address:

    When accessing the status interface it stays: no carrier

    No carrier means that - that interface has no connection to anything or the cable is faulty.

  • @JeGr thanks for answering

    is exactly that the problem, if I put this same cable on an ordinary router it works normally.
    I tested it on another UTM and another router recently, strange as it sounds in pfsense does not recognize, but on other platforms it works, alias, I'm using it now

Log in to reply