Transparent Firewall mode not work 2.4.4 P3



  • Help!! Is anyone using transparent firewall mode?
    I did in old pfsense but it is not working with current version 2.4.4 P3.

    Setup:

    • VMWare 6.5
    • Transparent pfsense
      34cad011-e8aa-45ff-88a3-ca30ff914b6f-image.png
    • 3 NICs: WAN (WANGW=192.168.1.1), LAN (192.168.10.1), DMZ (bridge interface 192.168.1.60 : WAN+DMZ)
      e12ebf7b-633e-42fc-970c-663129fb33b1-image.png
    • NAT : Disable Outbound NAT
      f61b48b8-398e-4c9b-b28b-f537257fc878-image.png
    • Rules : Pass any from any to any (in WAN & DMZ)
      1723b4de-5662-4686-ab97-ccc9d3dfec59-image.png
      28d80d03-d896-4d75-b7c7-ea036aa81b4a-image.png

    Cases:
    PC in LAN : Ping bridge interface ok,
    PC in DMZ : Ping bridge interface failed
    PC in WAN : Ping bridge interface failed
    In filter log, it shows the traffic from WAN & DMZ.

    Do I miss anything? Bridge don't work as expected.
    Thank you!!!


Log in to reply