Weird Traffic Graph



  • Screenshot_1.png

    Anyone here can explain why my traffic graph looks like this? thanks!

    Router: Intel Mini PC Celeron J1800
    Speed: 1GB

    dmesg:

    Copyright (c) 1992-2018 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    	The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019
        root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
    FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
    CPU: Intel(R) Celeron(R) CPU  J1800  @ 2.41GHz (2416.74-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    real memory  = 2147483648 (2048 MB)
    avail memory = 1907957760 (1819 MB)
    Event timer "LAPIC" quality 600
    ACPI APIC Table: <ALASKA A M I >
    WARNING: L1 data cache covers less APIC IDs than a core
    0 < 1
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    FreeBSD/SMP: 1 package(s) x 2 core(s)
    Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
    ioapic0 <Version 2.0> irqs 0-86 on motherboard
    SMP: AP CPU #1 Launched!
    Timecounter "TSC-low" frequency 1208368317 Hz quality 1000
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1
    random: entropy device external interface
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1
    iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1
    iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1
    iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1
    wlan: mac acl policy registered
    kbd1 at kbdmux0
    netmap: loaded module
    random: registering fast source Intel Secure Key RNG
    random: fast provider: "Intel Secure Key RNG"
    nexus0
    cryptosoft0: <software crypto> on motherboard
    padlock0: No ACE support.
    acpi0: <ALASKA A M I > on motherboard
    acpi0: Power Button (fixed)
    unknown: I/O range not supported
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
    atrtc0: Warning: Couldn't map I/O.
    atrtc0: registered as a time-of-day clock, resolution 1.000000s
    Event timer "RTC" frequency 32768 Hz quality 0
    hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 950
    Event timer "HPET" frequency 14318180 Hz quality 450
    Event timer "HPET1" frequency 14318180 Hz quality 440
    Event timer "HPET2" frequency 14318180 Hz quality 440
    attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Event timer "i8254" frequency 1193182 Hz quality 100
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pcib0: _OSC returned error 0x10
    pci0: <ACPI PCI bus> on pcib0
    vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
    vgapci0: Boot video device
    ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a16000-0xd0a167ff irq 19 at device 19.0 on pci0
    ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
    ahcich0: <AHCI channel> at channel 0 on ahci0
    xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
    xhci0: 32 bytes context size, 64-bit DMA
    xhci0: Port routing mask set to 0xffffffff
    usbus0 on xhci0
    usbus0: 5.0Gbps Super Speed USB v3.0
    pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
    hdac0: <Intel BayTrail HDA Controller> mem 0xd0a10000-0xd0a13fff irq 22 at device 27.0 on pci0
    pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
    pcib1: [GIANT-LOCKED]
    pci1: <ACPI PCI bus> on pcib1
    em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
    em0: Using an MSI interrupt
    em0: Ethernet address: 0c:e8:6c:68:2d:bf
    em0: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
    pcib2: [GIANT-LOCKED]
    pci2: <ACPI PCI bus> on pcib2
    em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
    em1: Using an MSI interrupt
    em1: Ethernet address: 0c:e8:6c:68:2d:c0
    em1: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
    pcib3: [GIANT-LOCKED]
    pci3: <ACPI PCI bus> on pcib3
    em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
    em2: Using an MSI interrupt
    em2: Ethernet address: 0c:e8:6c:68:2d:c1
    em2: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
    pcib4: [GIANT-LOCKED]
    pci4: <ACPI PCI bus> on pcib4
    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
    em3: Using an MSI interrupt
    em3: Ethernet address: 0c:e8:6c:68:2d:c2
    em3: netmap queues/slots: TX 1/1024, RX 1/1024
    ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a15000-0xd0a153ff irq 23 at device 29.0 on pci0
    usbus1: EHCI version 1.0
    usbus1 on ehci0
    usbus1: 480Mbps High Speed USB v2.0
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    acpi_button0: <Power Button> on acpi0
    acpi_button1: <Sleep Button> on acpi0
    uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0
    ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc1: FIFO with 16/16/16 bytes threshold
    ppbus0: <Parallel port bus> on ppc1
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    ppc0: cannot reserve I/O port range
    est0: <Enhanced SpeedStep Frequency Control> on cpu0
    est1: <Enhanced SpeedStep Frequency Control> on cpu1
    Timecounters tick every 1.000 msec
    hdacc0: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0
    hdaa0: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc0
    pcm0: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa0
    pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 5 on hdaa0
    ugen1.1: <Intel EHCI root HUB> at usbus1
    ugen0.1: <0x8086 XHCI root HUB> at usbus0
    uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
    uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
    uhub1: 7 ports with 7 removable, self powered
    uhub0: 8 ports with 8 removable, self powered
    usbus1: port reset timeout
    ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
    ada0: <faspeed K5M-32G Q0111A> ACS-2 ATA SATA 3.x device
    ada0: Serial Number SCRW17100903G0036
    ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    ada0: Command Queueing enabled
    ada0: 30029MB (61500000 512 byte sectors)
    Trying to mount root from ufs:/dev/ufsid/5d04e1e471a7214d [rw]...
    random: unblocking device.
    CPU: Intel(R) Celeron(R) CPU  J1800  @ 2.41GHz (2416.74-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      Structured Extended Features3=0xc000400<IBPB,STIBP>
      VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    em0: link state changed to UP
    pflog0: promiscuous mode enabled
    DUMMYNET 0 with IPv6 initialized (100409)
    load_dn_sched dn_sched FIFO loaded
    load_dn_sched dn_sched QFQ loaded
    load_dn_sched dn_sched RR loaded
    load_dn_sched dn_sched WF2Q+ loaded
    load_dn_sched dn_sched PRIO loaded
    load_dn_sched dn_sched FQ_CODEL loaded
    load_dn_sched dn_sched FQ_PIE loaded
    load_dn_aqm dn_aqm CODEL loaded
    load_dn_aqm dn_aqm PIE loaded
    em2: link state changed to UP
    em1: link state changed to UP
    ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
    IPFW: starting up interface tracker
    em2: link state changed to DOWN
    em2: link state changed to UP
    em2: link state changed to DOWN
    em2: link state changed to UP
    em2: link state changed to DOWN
    em2: link state changed to UP
    em2: link state changed to DOWN
    em2: link state changed to UP
    em1: link state changed to DOWN
    em1: link state changed to UP
    

    System Logs:

    Screenshot_1.png



  • pfSense is truly an amazing project. Mine has actually accomplished time travel! ;)
    Capture.JPG


Log in to reply