Custom Routing Options Conflict - OpenVPN stop run

hita352

Hello,

I have 4 tunnels VPN configured :
10.24.0.0/16
10.23.1.0/24
10.25.0.0/16
10.26.1.0/24

I added Routing Custom Option for the 10.24.0.0/16 :
push "route 10.23.1.0 255.255.255.0"
push "route 10.25.1.0 255.255.255.0"
push "route 10.26.1.0 255.255.255.0"

It works well

When I am adding new line -> push "route 10.25.2.0 255.255.255.0"
This tunnel stop works like a conflict appears or something is wrong.
I cannot understand what is the problem ?
Maye conflict in my OpenVPN Rules between tunnel VPN ?

Thanks you,

Rico

10.25.2.0 255.255.255.0 (10.25.2.0/24) overlaps 10.25.0.0/16
You don't need and should not push routes via the custom options in pfSense. Just use the boxes like IPv4 Local network(s).

-Rico

hita352

Why this rule work : push "route 10.25.1.0 255.255.255.0" but doesn't work adding 10.25.2.0 ? If it is overlapsing 10.25.0.0/16 ?

I make this configuration because I want to force my client to use Tunnel VPN in cas of reaching this IP's :
10.24.0.0/16
10.23.1.0/24
10.25.0.0/16
10.26.1.0/24

but all others IP connection will be routed by local network (Not passing bby my VPN).

I don't see how I can configure it in another way.

hita352

@Rico said in Custom Routing Options Conflict - OpenVPN stop run:

push routes via the custom options in pfSense

Do you have an idea ?

THnaks you,

jimp

Show the exact entries you have in custom options, the errors you receive in the OpenVPN log, and the resulting OpenVPN config file from /var/etc/openvpn. Without knowing the exact input or what OpenVPN is claiming the error is, nobody can say for sure what the problem may be.