Site to Site VPN between pfsense 2.4.4-RELEASE-p3 and Netgear WNDR3700V2 with DD-WRT firmware v3.0-r40559 std.
Herman last edited by
Good day everybody,
Recently I’ve upgraded my friends Netgear WNDR3700V2 with DD-WRT firmware v3.0-r40559 std (08/06/19). My own network is running pfsense 2.4.4-RELEASE-p3.
Since some time now I try to build a Site to Site VPN tunnel between my pfsense running OpenVPN and the Netgear WNDR2700V2. So far no success getting the tunnel up and running. Googled around for some instructions and tried several of them. Of all tutorials I found regarding this topic, I think the following site should do the trick. Also this time no success.
The link to the tutorial is: https://forum.netgate.com/topic/50861/success-openvpn-site-to-site-using-dd-wrt-client-pfsense-2-x-server
Somehow I miss a piece of the puzzle. My pfsense local network is subnet 10.0.0.0/24 and the remote network is 192.168.5.0. On both ends I use port 1195 because 1194 is already in use for OpenVPN Remote Access.
I hope to get some assistance to get this working properly. For example how do I check if the upload of the DD-WRT startup and firewall script is successful?
Look forward to some assistance and more detailed instructions
Just ask me if more info is required.
Thanks in advance,
Did you ever find anything that worked for you here? I am seeing similar results following similar articles... All seems to die during the initial TLS handshake.