OpenVPN and NAT from External IP
tompark last edited by
I have been trying to setup a NAT from one of the IP’s on the WAN of my PFSense router to an IP on the other side of my OpenVPN. So fare I have the following working:
WANIP = 137.x.x.25
LANA = PFSense 192.168.10.x/24
OpnenVPN Tunnel = 192.168.50.0/24
Tunnel up 1 (137.x.x.25 side) = 192.168.50.1
Tunnel IP 2 = Sever Side = 192.168.50.2
LANB = 10.205.10.0/24
Server ip = 10.205.10.5
All traffic from 10.205.10.x will go via the vpn and uses the default ip of the PFSense router. If I try to NAT port 80 to 10.205.10.5 it does work. At the moment on both firewalls I have any any allow rules on the lan and VPN’s to rule out the firewall. Does anyone have any suggestions on what I have missed?
viragomann last edited by
Does anyone have any suggestions on what I have missed?
You didn't mention, what's your problem.