No internet access via the pfSense LAN
-
@stephenw10 hello where I can found the captivr portal to enabled?
-
@PHIL_cfrancisco Do i need set a IP address on the USB LAN or not sir?
-
The captive portal should NOT be enabled. It's in Serices > Captive Portal.
From your screenshot the laptop seems to have pulled an IP address on 192.168.14.10. That should be correct.
If it has more than one IP address though it may not be using it. Try running on the laptop
route print.Steve
-
@stephenw10
Hi Good day again this is my route print from my laptop. -
@stephenw10 Sir I already fix the problem hehe :) I think, there is a problem on the LAN USB. so that may 1st network is Wireless TP link USB that connect on my Router then my on board lan is my 2nd network adapter that connected on my laptop then its worked! :) my laptop has connected on the internet I can also limit the bandwidth on the laptop.
Thank you sir again :) -
Yes, that looks like it. The laptop is not using 192.168.14.1 as it's default route in that screenshot.
You probably just need to remove whatever that connection to 192.168.10.x is before connecting to pfSense.
Steve
-
@stephenw10 hello sir on the laptop screeshot I created again pfsense and I set 192.168.10.1 :)
-
Ah, OK. So all working now?
-
@stephenw10 yes sir :) thank you sir for helping to solve my problem :)
-
No problem.
