Strange behavior of internet trafic
-
Dear all. I have next issue.
WAN
|
|
^ public IP
192.168.1.1 192.168.1.2 192.168.1.100
pfsense <- LAN <- lynsis wifi <–- PC^ 192.168.2.1
|
|
DMZ
My rules are great allow all and every where(configurating new network). Issue is -> when I connect pc directly to interface LAN I can get internet and every thing work perfectly. But when I connect wifi to LAN interface then connect PC to wifi(using wifi not cable) I can ping the 192.168.1.1 but I cant get internet on PC. This is strange I dont know what to do.... any help ...
LAN - 192.168.1.1
DMZ(OPT1) - 192.168.2.1
WAN - public IPWifi gateway IP 192.168.1.2
Wifi DHCP enbaled ip range 192.168.1.100 -> 192.168.1.150
Wifi DHCP enbaled ip gateway 192.168.1.1
Wifi DHCP enbaled dns provider's DNS public ip
-
I would turn off the DHCP on the wifi interface and use the DHCP on Pfsense. Either way, you'll need your gateway set to 192.168.1.1.
-
You think it will help? But IP addressing is correct…
-
I have strange idea that if I am using dhcp on WiFi - I need to create route at wifi - all comming to 192.168.1.2 gouse to 192.168.1.1…. i'am confused :(
-
I have strange idea that if I am using dhcp on WiFi - I need to create route at wifi - all comming to 192.168.1.2 gouse to 192.168.1.1…. i'am confused :(
This indicates that you have routing (outbound NAT) and a DHCP on the accesspoint enabled.
Set the accesspoint into bridge mode and disable the DHCP server.
-
Thats true, but i disabled NAT and not disabled dhcp and adsl mode is Routed Bridge.
I'll make changes that you are advising.. and let know what is the result. Thank you verry much
-
Thank you turning accespoint into bridge helped.
