1.2.3 RC 1 - Are we close to getting it into final?
-
It would be nice if the IPSec on watchguard firebox issue was fixed for the main 1.2.3 release.
Phil
-
It would be nice if the IPSec on watchguard firebox issue was fixed for the main 1.2.3 release.
Phil
Got a link to a ticket or forum post about it? It may be the same problem I'm working on right now (failing to detect a dead peer) with some Cisco devices.
-
It also fails to detect dead peer with SonicWall (Pro1260 and TZ170).
-Raylund
-
Also qVOIPup doesn't see any traffic on 1.2.3RC1, but downgrading to 1.2.2 works fine with the same config.
I'll re-test with the latest snapshot. I'm kind of new to pfSense, should I open a ticket?
-
Don't use the snapshot from today, it has issues I'm trying to work out right now.
Try the last snapshot from the 12th
Traffic Shaping isn't my forte', so I can't help with the real issue there.
-
Snapshots appear to be alive and kicking again.
There is a patch that was just added this evening that may fix the IPSec problem, but I won't be able to test it more until tomorrow. If someone else who is seeing the DPD failure/IPSec stuck open issue could try pfSense-Full-Update-1.2.3-20090514-1908.tgz or later, it may behave differently.
-
Seems everything is working fine in the latest snapshots so are we close to the final?
Darkk
Dont rush the cook man, you´ll get bad food ;)
-
Snapshots appear to be alive and kicking again.
There is a patch that was just added this evening that may fix the IPSec problem, but I won't be able to test it more until tomorrow. If someone else who is seeing the DPD failure/IPSec stuck open issue could try pfSense-Full-Update-1.2.3-20090514-1908.tgz or later, it may behave differently.
I used pfSense-Full-Update-1.2.3-20090515-0715.tgz and have boot problem. Something like kernel not found and hung after a few lines of that.
-Raylund
-
I was seeing that with some ISOs, but it really did boot (somehow the boot messages were being suppressed)
I did mine remotely so I don't know what it looked like from the console, I'll have to check again.
-
Yeah it looks like it's frozen, but it is actually booting. After a short time, you'll hear the beep and the menu is displayed.
Not sure what's up with that one…
-
Hmmm.. My built on Thu May 14 09:44:03 EDT 2009 on Alix (Full Install) goes up after approx 10 seconds, and stays consistently on 100 % CPU. I have two boxes, all the same issue. Was not the case on the version of around May 6th.
regards,
Hans -
Anymore other issues that needs to be worked on so it can go into final soon?
-
Darkk, I think bridging issue is still evident and needs to be fixed before the final.
If you go to the respective thread , there are quite a few people suffering from it (including myself).
