Driver support for Intel Dual Band AC 7260

stephenw10

Put if_iwm.ko in /boot/modules and iwm7260fw in /boot/firmware. You can get them from the ISO file directly.

Try to load it at the command line first.

There is currently no 802.11ac support in FreeBSD and hence pfSense. That should change at some point (hopefully soon) but there is no ETA.

Steve

alex1992

@stephenw10
Thanks Steve, I copied across the .KO files you mentioned and added the following lines to the loader.conf(5):

if_iwm_load="YES"
iwm3160fw_load="YES"
iwm3168fw_load="YES"
iwm7260fw_load="YES"
iwm7265fw_load="YES"
iwm8000Cfw_load="YES"
iwm8265fw_load="YES"

After rebooting pfsense, i can see the kernel shows all the above lines right at the beginning, but still after it's fully loaded, im not able to see the wireless card under the available options for wireless interface in the gui. Any thoughts on that?

EDIT: using this command in shell "pciconf -lv" gives me the below output, which confirms that it sees the card:

none2@pci0:4:0:0: class=0x028000 card=0x40708086 chip=0x08b18086 rev=0x73 hdr=0x00
vendor = 'Intel Corporation'
device = 'Wireless 7260'
class = network

So is there a way to enable this card through command so it can be used inside pfsense?

stephenw10

It looks like that should be supported:
https://github.com/pfsense/FreeBSD-src/blob/RELENG_2_4_5/sys/dev/iwm/if_iwm.c#L5842

So check the module did actually load using kldstat. Look for errors in the boot log.

Steve

stephenw10

iwm was actually just added to 2.5 recently so if you want to test the card you could upgrade to that. There's no easy way to downgrade though.
It will probably be in 2.4.5p1 also.

[2.5.0-DEVELOPMENT][admin@fw321.stevew.lan]/root: kldstat -v | grep iwm
		161 pci/iwm
		166 iwm7265Dfw_fw
		165 iwm7265fw_fw
		164 iwm7260fw_fw
		163 iwm3168fw_fw
		162 iwm3160fw_fw
		168 iwm8265fw_fw

Steve

alex1992

@stephenw10
You are correct it works in version 2.5 but not 2.4.5. Thank you again

stephenw10

Ah, nice. As I say it's just been added to the 2.4.5p1 build list so it should be supported there too when that is available.

Steve

tquade

@stephenw10

Seems no support for Access Point mode as of yet.

Ted

stephenw10

Indeed, no hostap mode. I'm not sure that hardware can support it. It's unlikely to in FreeBSD/pfSense anytime soon, in any version.

Steve

Freedom Network

@stephenw10 Instead of copy kernel module manually, can those things be packaged in pak manager?

stephenw10

It is possible. This driver is in the kernel now anyway though:
https://redmine.pfsense.org/issues/7725

Steve