Error when attempting to issue show packet-counters command
-
Ran the requested command from tnsr and got output that I would expect to see running the show packet-counters command. What does that tell you Jim?
-
What exactly was in the output? Can you paste it here? I wouldn't expect an error unless maybe there was something unexpected in that output.
-
The outout I get invoking your suggested command is:
TNSR tnsr# shell sudo vppctl show node counters Count Node Reason 12651 dpdk-input no error 6 dhcp-proxy-to-client DHCP packets for local client. 3 ip4-dhcp-client-detect Extract 1 dhcp-client-process DHCP discover packets sent 2 dhcp-client-process DHCP request packets sent 2 dhcp-client-process DHCP bind success 110611 acl-plugin-out-ip4-fa new sessions added 8704269 acl-plugin-out-ip4-fa existing session packets 8814880 acl-plugin-out-ip4-fa checked packets 179 acl-plugin-out-ip4-fa restart session timer 14 acl-plugin-in-ip4-fa ACL deny packets 125341 acl-plugin-in-ip4-fa ACL permit packets 6507328 acl-plugin-in-ip4-fa existing session packets 6629562 acl-plugin-in-ip4-fa checked packets 119 acl-plugin-in-ip4-fa restart session timer 1701 arp-reply ARP replies sent 14 arp-reply IP4 source address not local to subnet 16 arp-reply ARP request IP4 source address learned 6 arp-disabled ARP Disabled on this interface 6 arp-input IP4 destination address is unset 2 ip4-glean ARP requests throttled 90 ip4-glean ARP requests sent 1 ip4-input ip4 ttl <= 1 5435 ip4-input Multicast RPF check failed 1 ip4-icmp-error hop limit exceeded response sent 13670 ip4-icmp-input echo replies sent 664 lldp-input lldp packets received on disabled interfaces 3354 llc-input unknown llc ssap/dsap 22 GigabitEthernet4/0/0-output interface is down 27 TenGigabitEthernet6/0/0-output interface is down 27 TenGigabitEthernet6/0/1-output interface is down 27 TenGigabitEthernet8/0/0-output interface is downI tried the normal command once more for kicks and still get the error I reported earlier. Also, an running an up to date 20.1-1 instance in an SG-5100 just have all the variables.
-
1 ip4-input ip4 ttl <= 1I bet it's that.
Are there really missing line breaks in a couple places there? Or was that just a copy/paste issue?
-
Screenshot from my phone just to avoid any copy and paste format fun.
-
Sorry about those breaks. I hadn't noticed them when I copied from the terminal.
-
That's OK, I figured it was just a copy/paste issue but wanted to be certain.
I'll work that info into a bug report, thanks!
-
Thanks for your understanding. So I've helped find a bug? Cool deal. Glad I could contribute to the cause. Any idea how long you think that one would take to correct? I'm not sure where it would fall on your list of priorities. In the meantime, I can always run the command you suggested. Pleasure interacting with you yet again!
-
Actually it looks like we already had one open for that. It's slated to be fixed in our next release (20.06) which isn't too far off.
In the meantime, you can run the
vppctlversion of the command to get the output. -
Way to make a guy feel redundant
-
@gabacho4 - Thanks for all the great feedback and questions!
-
@audian no problem at all! I'm enjoying the TNSR experience and look forward to seeing the fixes and improvements you all are working on.
