Accessing IPsec an OpenVPN client
-
Hello everybody, I have a scenario just like this:
Re: Accessing IPsec branch office from an OpenVPN client
IPSec Site A to Site B
OpenVPN Site A, but I need to access Site BI already have 2 tunels (Phase2) pointing to correct networks, but I still can't access Site B over OpenVPN.
The only difference i've found is my NAT Outbounding table. It's MANUAL.
Can anybody help me with NAT settings? Do I need to assign my OpenVPN interface and create a GW?
Thanks for now.
-
I assume the OpenVPN is an access server, so have you pushed the route for the site B networks to the clients?
@mafpbiaggi said in Accessing IPsec an OpenVPN client:
I already have 2 tunels (Phase2) pointing to correct networks
Show screenshots, please and provide more details about your networks.
-
Given that VPN type is irrelevant, you have a routing or filter issue. Once a VPN is up, it's no different than any other IP connection.
-
@viragomann and @JKnott , thanks for the repply, but I already solved the issue. The problem was wrong firewall rules in the other side of the ipsec tunel.