Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    pimd Multicast routing with Airtame

    L2/Switching/VLANs
    pimd multicast
    1
    1
    211
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jadyn.dev last edited by jadyn.dev

      I have a setup where multiple TV's (with Airtame devices) are connected to a VLAN. Users should be able to connect to these devices via AirPlay and similar services. Therefore the devices have to discover each other via multicast.
      The client devices are located in there own VLANs. It looks like this:
      Airtame.png
      I've tried to configure the new PIMD package (V 0.0.2) it lists the Airtame devices as expected. But the multicast traffic is not forwarded to the other clients. The pimd.conf looks like this:

      default-route-distance 101
      default-route-metric 1024
      igmp-querier-timeout 180
      phyint em2 enable
      phyint em3 enable
      phyint em1 enable
      rp-candidate em3
      	group-prefix 239.255.255.250
      	group-prefix 224.0.0.251
      rp-candidate em2
      	group-prefix 239.255.255.250
      	group-prefix 224.0.0.251
      rp-candidate em1
      	group-prefix 239.255.255.250
      	group-prefix 224.0.0.251
      rp-address 10.0.3.1 239.255.255.250
      rp-address 10.0.3.1 224.0.0.251
      rp-address 10.0.2.1 239.255.255.250
      rp-address 10.0.2.1 224.0.0.251
      rp-address 10.0.1.1 239.255.255.250
      rp-address 10.0.1.1 224.0.0.251
      

      As stated in the release notes, it may be possible to create invalid configurations with the GUI.

      1 Reply Last reply Reply Quote 0
      • First post
        Last post