LAN link showing as "down" in the webGUI widget even though everything is functioning normally

[timesscar]

Hello,

After the 2.4.5 update I noticed that the webGUI is showing that my LAN link (a MLX connectx-2 card) always shows as "down" even though everything is behaving normally. As such, it seems only to be a display issue. Here is the relevant output of ifconfig;

mlxen0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=ed00bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 00:02:c9:53:7c:9a
	hwaddr 00:02:c9:53:7c:9a
	ether 00:02:c9:53:7c:9a
	hwaddr 00:02:c9:53:7c:9a
	inet6 fe80::202:c9ff:fe53:7c9a%mlxen0 prefixlen 64 scopeid 0x9
	inet 172.19.2.1 netmask 0xffffff00 broadcast 172.19.2.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (10Gbase-SR <full-duplex>)
	status: active

Here is the widget;

Any thoughts? I searched around for a while and I haven't found anyone else with the same issue.

Thanks.