LAGG with VLAN configuration between Pfsense and Edgeswitch Lite

[adelaide_guy]

Hi, Everyone.

I am new with Pfsense and willing to learn. I am currently trying to setup a pfsense box connecting to a Edgeswitch Lite with LAGG and VLAN configured. But the two device seems do not sync to each (apologies if term I am using is not correct). Machine connected behind the switch cannot get DHCP or if setup a static address, it cannot reach the pfsense. Below is the configuration I did on both Pfsense and EdgeSwitch Lite:

Here is my configuration in Pfsense

• Under Interfaces > LAGGs: created LAGG0 and the members are igb2 and igb3
• Under Interfaces > VLANs: created VLAN 10 to 50 binding to Interface lagg0
• Under Interfaces > Interface Assignments: Added VLAN 10 to 50
• Under Firewall > Rules > NameofeachVLANS: added the rule action: passsource:nameofvlan net port:any Destination:any
• Under System > Advanced > System Tunables: added net.link.lagg.0.lacp.lacp_strict_mode with a value of 0

Here are my configuration in EdgeSwitch Lite
- Under Swtiching > Port Channel > Summary: made sure 0/23 and 0/24 is member of Interface 3/1
- Under Swtiching > Port Channel > Summary: configured 3/1 to have Static Mode to disable
- Under VLAN > Port Configurationy Interface 0/23, 0/24 and 3/1 (LAGG) are configured as Tagged on VLAN ID 10,20,30,40 and 50

Please let me know what I did wrong or if you need more information I am willing to provide more information. Thank you in advance for the help.

[adelaide_guy]

I think setting the interface 3/1 to Trunk under Switching > VLAN > Switch Port Summary may have resolved the issue. It allowed my DHCP from the firewall to traverse to the VLAN. I will further test this when I get more time.

This may have been a switch config issue and not the firewall. Apologies for posting this issue in the netgate forum.