PfblockerNG working Intermittently

[adelaide_guy]

Hi, Everyone.

May I ask your help, I am new with PFBlockerNG. Currently I enabled PFBlocker for the thhe use DNSBL. I followed Tom’s guide to block unwanted Outbound traffic. Here is my initial config:

I multiple VLANS, I have allowed any IP address to reach port 53/udp of the local network of each VLAN and on each VLAN I have configured to block port 53/udp from LAN to any

I have configured pfsense DHCP server to server 192.168.254.1 as DNS on each VLAN

In PFBlocker, enable it and use the Virtual IP address 192.168.254.1, enable Permit Firewall Rules and select all my interface.

After my initial configuration it will work and then suddenly it will stop resolving names, I tested this by going nslookup and it will say DNS request timed out.

If its working I will be able to perform nslookup without any error message.

Hope you can help me.

[adelaide_guy]

I think we have addressed the issue, it was a rookie mistake. I should have place the IP address of the router interface on each VLAN as the DNS server instead of VIP address.