Configure VLAN / communication with Dell Switchs and Dlink AP
-
Hello,
Actually i have one pfsense Netgate XG-7100 with Vlans option.
I have 4 Vlan group:- 0 with vlan tag 1 and no members (default system VLAN)
- 1 with vlan tag 4090 and members 1,9t,10t (WAN)
- 2 with vlan tag 4091 and members 2,3,4,5,6,7,9t,10t (LAN)
- 3 with vlan tag 100 and member 8t (Dlink Wifi AP)
Interface Assignments is:
- WAN -> VLAN 4090
- LAN -> VLAN 4091
- WIFI -> VLAN 100
VLAN Interfaces is:
- lagg0 -> VLAN tag 4090
- lagg0 -> VLAN tag 4091
- lagg0 -> VLAN tag 100
WAN and LAN work perfectly but Wifi not !
My VLAN port (8t) is connect on my Dell switch (Dell Networking N3048P) on port 8 and my Dlink AP is connected on port 7.My Dlink AP have two Wifi networks, one private with 10.1.X.X address and one public with 192.168.100.X. The DHCP is on netgate.
Ports 7 (Dell Switch) is configured with options:
- VLAN 100 (Wifi) and default to communicate with 10.1.X.X and 192.168.100.X
Ports 8 is configured with options:
- VLAN 100 (Wifi) only
I have no communication between my switch and my netgate and between my netgate and Dlink AP.
When i plug a laptop on port 8 (netgate port) and configure my LAN to communicate with tag 100 i have no trace too (no ping, no network frame).
My rule for WIFI interface (port 8) is "IPv4*, source *, port *, destination *, port *" (full access)I don't understand my problem.
My vlan 100 is configure on my netgate on port 8 and my switch is configured to communicate with vlan 100.Any help will be apprecied.
PS: Sorry for my English, i'm French :)