Fetching package: connection reset by peer

float · Sep 12, 2020, 3:23 PM

Hello,

I'm trying to install pfSense-pkg-pfBlockerNG-devel but the installer fails to get "whois".
Errorlog:

Installing pfSense-pkg-pfBlockerNG-devel...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
The following 10 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
grepcidr: 2.0 [pfSense]
iprange: 1.0.4 [pfSense]
jq: 1.6 [pfSense]
libmaxminddb: 1.4.2 [pfSense]
lighttpd: 1.4.54 [pfSense]
lua52: 5.2.4 [pfSense]
pfSense-pkg-pfBlockerNG-devel: 2.2.5_34 [pfSense]
py37-maxminddb: 1.4.1_1 [pfSense]
py37-sqlite3: 3.7.7_7 [pfSense]
whois: 5.2.17 [pfSense]

Number of packages to be installed: 10

The process will require 9 MiB more space.
190 KiB to be downloaded.
[1/6] Fetching whois-5.2.17.txz: ....... done
pkg-static: https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz: Connection reset by peer
Failed

Could someone explain me what is happening and how I can fix this? I only have this issue with the "whois" package.

DaddyGo · Sep 12, 2020, 3:39 PM

@float said in Fetching package: connection reset by peer:

how I can fix this?

Hi,

Try running the following from the console...

pkg-static -vv
pkg-static update -f
pkg-static upgrade -n

then try to install pfBlockerNG-devel again

float · Sep 12, 2020, 3:48 PM

I upgraded this package:

Installed packages to be UPGRADED:
pfSense-upgrade: 0.84 -> 0.86 [pfSense]

and tried again:

[1/6] Fetching whois-5.2.17.txz: ....... done
pkg-static: https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz: Connection reset by peer
Failed

DaddyGo · Sep 12, 2020, 3:55 PM

@float

What do you see then?

Diagnostics /Command Prompt

and paste:
service nginx oneupgrade

float · Sep 12, 2020, 3:56 PM

Performing sanity check on nginx configuration:
nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
Upgrading nginx binary:
nginx not running? (check /var/run/nginx.pid).

DaddyGo · Sep 12, 2020, 4:09 PM

@float

Nginx looks good

Did you not change the default Cert.?
Can you install another package on the box?

f.e.: iperf (try it, just for the sake of curiosity)

float · Sep 12, 2020, 4:11 PM

I did not change the default cert.

Installing pfSense-pkg-iperf...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
The following 2 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
iperf3: 3.7 [pfSense]
pfSense-pkg-iperf: 3.0.2_4 [pfSense]

Number of packages to be installed: 2

122 KiB to be downloaded.
[1/2] Fetching pfSense-pkg-iperf-3.0.2_4.txz: . done
[2/2] Fetching iperf3-3.7.txz: .......... done
Checking integrity... done (0 conflicting)
[1/2] Installing iperf3-3.7...
[1/2] Extracting iperf3-3.7: .......... done
[2/2] Installing pfSense-pkg-iperf-3.0.2_4...
[2/2] Extracting pfSense-pkg-iperf-3.0.2_4: ......... done
Saving updated package information...
done.
Loading package configuration... done.
Configuring package components...
Custom commands...
Menu items... done.
Services... done.
Writing configuration... done.

Cleaning up cache... done.
Success

DaddyGo · Sep 12, 2020, 4:18 PM

@float

Super...
and now again with pfBlockerNG

btw:
was pfBlockerNG already installed earlier?

float · Sep 12, 2020, 4:20 PM

Helas :-)

The process will require 9 MiB more space.
190 KiB to be downloaded.
[1/6] Fetching whois-5.2.17.txz: ....... done
pkg-static: https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz: Connection reset by peer
Failed

No, it's a brand new installation.

DaddyGo · Sep 12, 2020, 4:30 PM

@float said in Fetching package: connection reset by peer:

No, it's a brand new installation.

OK...

Your version: 2.4.5-p1?

Out of ideas ...temporarily
I’m trying to update one on my own pfBlockerNG to see what’s going on.

btw:
(Connection reset by peer)

This is because it is an RST from the Netgate server, which is only for the whois package...???

float · Sep 12, 2020, 4:32 PM

Yes, I only receive the error for the whois package.
Can I install it manually in some way?

DaddyGo · Sep 12, 2020, 4:44 PM

@float said in Fetching package: connection reset by peer:

Can I install it manually in some way?

This is a complex installer where package dependencies are present during installation.
So manual installation is not a solution as the pfBlockerNG installer does not proceed due to the error...

Recently, @viktor_g has been working on pfBlockerNG, if I can see clearly.......
So let him know this problem, might help

btw:
whois-5.2.17.txz" package I don't see either ...

float · Sep 12, 2020, 4:48 PM

Thank you. I'll open a new topic.

I can see the package on the website:
whois-5.2.17.txz 31-Jan-2020 17:14 59136

DaddyGo · Sep 12, 2020, 5:04 PM

@float said in Fetching package: connection reset by peer:

Thank you. I'll open a new topic.

There are very few on the forum these days, it’s such a late summer thing....
Viktor will see that we mentioned it

++++edit:
ok I have it too
http://162.208.119.40/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/

Rico · Sep 12, 2020, 5:05 PM

Why open multiple threads for the same problem/question?
I just tried to install pfBlockerNG-devel 2.2.5_34 and it's working

>>> Installing pfSense-pkg-pfBlockerNG-devel... 
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
The following 10 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	grepcidr: 2.0 [pfSense]
	iprange: 1.0.4 [pfSense]
	jq: 1.6 [pfSense]
	libmaxminddb: 1.4.2 [pfSense]
	lighttpd: 1.4.54 [pfSense]
	lua52: 5.2.4 [pfSense]
	pfSense-pkg-pfBlockerNG-devel: 2.2.5_34 [pfSense]
	py37-maxminddb: 1.4.1_1 [pfSense]
	py37-sqlite3: 3.7.7_7 [pfSense]
	whois: 5.2.17 [pfSense]

Number of packages to be installed: 10

The process will require 9 MiB more space.
2 MiB to be downloaded.
[1/10] Fetching pfSense-pkg-pfBlockerNG-devel-2.2.5_34.txz: .......... done
[2/10] Fetching lighttpd-1.4.54.txz: .......... done
[3/10] Fetching lua52-5.2.4.txz: .......... done
[4/10] Fetching jq-1.6.txz: .......... done
[5/10] Fetching whois-5.2.17.txz: ........ done
[6/10] Fetching py37-maxminddb-1.4.1_1.txz: .... done
[7/10] Fetching libmaxminddb-1.4.2.txz: ..... done
[8/10] Fetching iprange-1.0.4.txz: ... done
[9/10] Fetching grepcidr-2.0.txz: ... done
[10/10] Fetching py37-sqlite3-3.7.7_7.txz: .... done
Checking integrity... done (0 conflicting)
[1/10] Installing lua52-5.2.4...
[1/10] Extracting lua52-5.2.4: ......... done
[2/10] Installing libmaxminddb-1.4.2...
[2/10] Extracting libmaxminddb-1.4.2: .......... done
[3/10] Installing lighttpd-1.4.54...
===> Creating groups.
Using existing group 'www'.
===> Creating users
Using existing user 'www'.
[3/10] Extracting lighttpd-1.4.54: .......... done
[4/10] Installing jq-1.6...
[4/10] Extracting jq-1.6: .......... done
[5/10] Installing whois-5.2.17...
[5/10] Extracting whois-5.2.17: .......... done
[6/10] Installing py37-maxminddb-1.4.1_1...
[6/10] Extracting py37-maxminddb-1.4.1_1: .......... done
[7/10] Installing iprange-1.0.4...
[7/10] Extracting iprange-1.0.4: ..... done
[8/10] Installing grepcidr-2.0...
[8/10] Extracting grepcidr-2.0: ..... done
[9/10] Installing py37-sqlite3-3.7.7_7...
[9/10] Extracting py37-sqlite3-3.7.7_7: ........ done
[10/10] Installing pfSense-pkg-pfBlockerNG-devel-2.2.5_34...
[10/10] Extracting pfSense-pkg-pfBlockerNG-devel-2.2.5_34: .......... done
Saving updated package information...
done.
Loading package configuration... done.
Configuring package components...
Loading package instructions...
Custom commands...
Executing custom_php_install_command()...
MaxMind GeoIP databases are not pre-installed during installation.
To utilize the MaxMind GeoIP functionalities, you will be required to register for a free MaxMind user account and access key. Review the IP tab: MaxMind Settings for more details.


Adding pfBlockerNG Widget to the Dashboard... done.

Creating Firewall filter service... done.
Renew Firewall filter executables... done.
Starting Firewall filter Service... done.

Creating DNSBL service... done.
Renew DNSBL lighttpd executable... done.
Starting DNSBL Service... done.

Upgrading previous settings:
 Adv. Inbound firewall rule settings... no changes required ... done.
 OpenVPN/IPSec interface selections... no changes required ... done.
 Proofpoint/ET IQRisk settings... no changes required ... done.
 General Tab -> IP Tab settings... no changes required ... done.
 pfBlockerNGSuppress Alias -> IPv4 Suppression Customlist... no changes required ... done.
 Upgrading previous EasyLists to new format... no changes required ... done.
Upgrading... done

Custom commands completed ... done.
Executing custom_php_resync_config_command()...done.
Menu items... done.
Services... done.
Writing configuration... done.
=====
Message from grepcidr-2.0:

--
===>   NOTICE:

The grepcidr port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
>>> Cleaning up cache... done.
Success

-Rico

float · Sep 12, 2020, 5:08 PM

I thought I had to open another topic in the pfblocker section. You can delete it. I can't delete it.
I reinstalled the image that I received from netgate for the XG-7100 and the "whois" change is the only package that I'm not able to install.

DaddyGo · Sep 12, 2020, 5:17 PM

@float said in Fetching package: connection reset by peer:

netgate for the XG-7100

Okay, the installation works for me too (lab APU4d4), so you have - something on your side

Stay on this thread... @Rico is right

This is genuine Netgate stuff, so you have more options for troubleshooting - error ticket for example

Rico · Sep 12, 2020, 5:48 PM

Can you fetch the file manually from the local console or SSH without errors?

[2.4.5-RELEASE][admin@pfSense2.localdomain]/root: fetch -o /dev/null https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz
/dev/null                                               57 kB  317 kBps    00s
[2.4.5-RELEASE][admin@pfSense2.localdomain]/root:

-Rico

float · Sep 12, 2020, 5:52 PM

No.

[2.4.5-RELEASE][admin@*]/root: fetch -o /dev/null https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz
/dev/null 82% of 57 kB 596 Bps 17s
fetch: https://firmware.netgate.com/pkg/pfSense_factory-v2_4_5_amd64-pfSense_factory-v2_4_5/All/whois-5.2.17.txz: Connection reset by peer

float · Sep 12, 2020, 5:55 PM

Resolving the website takes also very long.
DNS issue?