no bgp default ipv4-unicast
Can you please implement a possibility to disable IPv6 sessions within the IPv4 address family?
In FRR it looks like this:
c01.fra.de.as49697.net# show bgp summary IPv4 Unicast Summary: BGP router identifier 220.127.116.11, local AS number 49697 vrf-id 0 BGP table version 1047794 RIB entries 1494151, using 262 MiB of memory Peers 2, using 41 KiB of memory Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 18.104.22.168 4 39912 391592 659 0 0 0 05:26:47 818127 2a01:100:1027:1337::2 4 39912 114294 661 0 0 0 05:26:48 NoNeg Total number of neighbors 2 IPv6 Unicast Summary: BGP router identifier 22.214.171.124, local AS number 49697 vrf-id 0 BGP table version 247765 RIB entries 181100, using 32 MiB of memory Peers 1, using 20 KiB of memory Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 2a01:100:1027:1337::2 4 39912 114294 661 0 0 0 05:26:48 95543
In versions prior TNSR 20.x it was possible to do the following:
conf t (config)# route bgp 3158 (config-router)# address-family ipv4 (config-router-af)# no neighbor 2a06:e81:119:b::2 activate (config-router-af)# end
But since the big change in version 20 even this is not longer possible.
I was evaluating TNSR a longer time ago, the last info I got was that this has been noted in a redmine case (RM 4399) and someone is working on that.
Please either implement this command (see topic name) or re-implement the workaround that worked before.
audian last edited by
Thanks Joey, the original request is still on our backlog, no roadmap ETA at the moment though.