pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!

BBcan177

Ok I see the issue.

As reference:
https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pfSense-pkg-pfBlockerNG-devel/files/usr/local/pkg/pfblockerng/pfblockerng.inc#L9350-L9351

Can you edit the file: /usr/local/pkg/pfblockerng/pfblockerng.inc, Lines 9350 and 9351

From:

// Remove CARP Advskew setting, if found
if (isset($xml['pfblockerngdnsblsettings']['pfb_dnsvip_skew'])) {
    unset($xml['pfblockerngdnsblsettings']['pfb_dnsvip_skew']);
}

To:

// Remove CARP Advskew setting, if found
if (isset($xml['pfblockerngdnsblsettings' ]['config'][0]['pfb_dnsvip_skew'])) {
   unset($xml['pfblockerngdnsblsettings']['config'][0]['pfb_dnsvip_skew']);
}

I missed adding ['config'][0] to each of those two lines... Sorry about that...

asmodeus

@bbcan177 said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

The URL that you posted is for Filtering events, not whitelisting? Write out the steps you took so I can try to reproduce.

Sure:

Coming from the pfBlockerNG dashboard on my Status/Dashboard page, I use the alerts link to review blocked domains in a list. The link points to /pfblockerng/pfblockerng_alerts.php?filterdnsbl=DNSBL_Malicious2
Using this list (which takes a while to load) I want to whitelist a domain, so I click on the 'plus' sign to start the process.
I specify wildcard no, add description no.
Page loads for a while and ultimately I am getting the nginx timeout. (Even when this worked it takes 110 seconds or more to complete)
The page I attempted to whitelist is NOT whitelisted.
The entire pfsense UI is unresponsive at this point and I resolve by restarting php-fpm via ssh

The Log Settings are set to default (20000 lines), and the Alert Settings are set to default:1000 Stat Table entries and 100 Filter Limit. Are these the Alert Settings you were asking about?

BBcan177

@asmodeus said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

and the Alert Settings are set to default:1000 Stat Table entries and 100 Filter Limit. Are these the Alert Settings you were asking about?

From the Reports/Alerts tab, click the "+" on the right side of the page to open the "Alert Settings", the default for "Filter Limit Entries" is 100.

If you set it too high, you need to wait for the whole page to finish loading before trying to Whitelist.

There is also a new option in the Reports tab to "Pause" the auto page refresh. Its at the left side of each table heading.

asmodeus

@bbcan177 said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

From the Reports/Alerts tab, click the "+" on the right side of the page to open the "Alert Settings", the default for "Filter Limit Entries" is 100.

Got it, that's what Filter Limit Entres is set to for me - 100. Is there a chance to speed up loading of this page before/after whitelisting?

fmroeira86

@bbcan177 said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

@fmroeira86

Ok I see the issue.

As reference:
https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pfSense-pkg-pfBlockerNG-devel/files/usr/local/pkg/pfblockerng/pfblockerng.inc#L9350-L9351

Can you edit the file: /usr/local/pkg/pfblockerng/pfblockerng.inc, Lines 9350 and 9351

From:
// Remove CARP Advskew setting, if found
if (isset($xml['pfblockerngdnsblsettings']['pfb_dnsvip_skew'])) {
    unset($xml['pfblockerngdnsblsettings']['pfb_dnsvip_skew']);
}
To:
// Remove CARP Advskew setting, if found
if (isset($xml['pfblockerngdnsblsettings' ]['config'][0]['pfb_dnsvip_skew'])) {
   unset($xml['pfblockerngdnsblsettings']['config'][0]['pfb_dnsvip_skew']);
}
I missed adding ['config'][0] to each of those two lines... Sorry about that...

Thank you.

Is this fix going to be released in the next version?

BBcan177

@fmroeira86 said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

Thank you.
Is this fix going to be released in the next version?

Once you confirm that it works :)

fmroeira86

@fmroeira86 said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

if (isset($xml['pfblockerngdnsblsettings' ]['config'][0]['pfb_dnsvip_skew'])) {
unset($xml['pfblockerngdnsblsettings']['config'][0]['pfb_dnsvip_skew']);

Made the changes you suggested but it is not working.
Skew still gets to 0 on the secondary machine.

Bob.Dig

This post is deleted!

mcury

Since the update to 3.0, cpu usage went down considerable, also the sg-3100 temps.
Really nice work..

axellarsson

Hi BBcan177,

Thanks for the 3.0 release!

I'm currently not using the Python module since I have unbound views set up to only include the DNSBL configuration for certain subnets. However, I also have a custom Python module loaded to filter out AAAA responses from a number of Netflix domains and subdomains (works around an issue with IPv6 tunnelbrokers being blocked by Netflix as proxies).

Presently, when pfBlockerNG-devel is set to Unbound mode it resets my Unbound Python module settings every hour when it refreshes. Is there any way to get it to coexist with my own Python module and remain in Unbound mode? (I understand that this will preclude me from using the pfBlockerNG Python module in the future since pfSense's unbound configuration only supports one Python module, but for the moment I'd rather live with that limitation and use pfBlockerNG in Unbound mode while maintaining my current custom Python configuration).

Thanks!

Gertjan

@axellarsson

This is what you can do : edit : /usr/local/pkg/pfblockerng/pfblockerng.inc : lines 2025 and up :

		// Remove python settings from DNS Resolver configuration
		if (isset($config['unbound']['python'])) {
//			unset($config['unbound']['python']);
//			$config['unbound']['python_order']	= '';
//			$config['unbound']['python_script']	= '';

			$log = 'KEEPING DNSBL Unbound admin added python script';

Add in front of lines 2027 - 2028 - 2029 the "//"
Change line 2031 so it shows a text in the update log what it is doing.

So, 4 lines need minor editing. The last one is even not strictly needed.

Now your unbound python settings like :

persists when pfBlockerNG 'does it things'.

Your own no-aaaa script gets loaded by unbound as before :

This line shows in the log because I modified the original no-aaaa script to show this line at init/start of the script.

When "views" gets integrated into pfBlockerNG, you should be able to switch to the new Python mode, uses views and use the build in 'no-aaaa' facility.

See this as a temporary patch that gives you the possibility to use your own no-aaaa script while you use pfBlockerNG in unbound mode != python mode.
Right now, true, if pfBlockerNG is put in unbound mode, it removes / deactivates unbound own python settings.

RonpfS

@axellarsson Or use the Python mode with no AAAA setting Screenshot_2020-12-22 pf100se ici - Firewall pfBlockerNG DNSBL.png

j.koopmann

@BBcan177 thanks for this release. I just installed it. Looks like it is working BUT in the reports tab suddenly Source and IF is "unknown" which was not the case before the upgrade. Any idea?

I am on pfsense 2.4.5 and pfblocker-ng 3.0.0_7

BBcan177

@j-koopmann

pfSense 2.4.5 uses Unbound v1.10.1 which has a regression that fails to pass some information to the python modules. It has been fixed, but there is no way to upgrade Unbound to v.1.12.0 in pfSense 2.4.5.

In pfSense 2.5, it has Unbound v1.13.0.

For the DNSBL Blocking part, you can enable the checkbox in the DNSBL Tab > DNSBL Event Logging , and that will stop the python integration from logging, and use the DNSBL Webserver to log the events. Unfortunately, that is only limited to HTTP events.

And for DNS Reply logging, there is no other workaround.

Not much I can do unfortunately.

j.koopmann

@bbcan177 Thanks for the prompt reply.

I am willing to experiment but from what I just read 2.5 is not that close to be production ready (or is your experience different?).

Sad that no solution exists for upgrading unbound but that is not you fault of course. I changed to DNSBL Event Logging. What are typical "non http events" and am I missing them completely then (which would make debugging quit interesting).

What do you mean with DNS Reply logging?

Sorry for the stupid questions.

BBcan177

@j-koopmann said in pfBlockerNG-devel v3.0.0 - No longer bound by Unbound!:

I am willing to experiment but from what I just read 2.5 is not that close to be production ready (or is your experience different?).

pfSense 2.5 is nearing RC status.

Sad that no solution exists for upgrading unbound but that is not you fault of course. I changed to DNSBL Event Logging. What are typical "non http events" and am I missing them completely then (which would make debugging quit interesting).
What do you mean with DNS Reply logging?
Sorry for the stupid questions.

DNS Reply logging will not show the Source IP/Hostname in pfSense < 2.5 as there is a regression in Unbound.

bruor

@bbcan177 I might have found a bug with IPv6 DNSBL. When I have it enabled, it creates a VIP on the LAN interface, but it seems to block the ability for "track interface" to work. If I disable IPv6 DNSBL, the LAN gets an IPv6 address as expected.

BBcan177

@bruor
Set the DNSBL Interface to use "Localhost"

bruor

@bbcan177 Awesome thanks!

A Former User

Anybody an Idea why the pfb widget stopped to count the total queries resolved by unbound since v3.0.0? I'm currently running v3.0.0_7.