Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    VLAN issues with Windows RRAS Server

    Scheduled Pinned Locked Moved L2/Switching/VLANs
    1 Posts 1 Posters 399 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jsm03913
      last edited by

      Hello all! I have a Windows server (2019) with RRAS installed. I can get connected to RRAS from the outside over regular IKEv2 VPN with certificates. However, this is if I make sure the VPN connection is on the same VLAN as the actual RRAS server - VLAN 2. If I add another NIC on VLAN 5, make sure it's added to pfSense on the external IP interface, the trunk line, can pass traffic and route properly, and RRAS is set up properly to accept connections on VLAN 5 and have the DHCP relay to the DHCP server on VLAN 2, somewhere along the way pfSense (?) gets confused and tries to add the external VPN client back to VLAN 2, rather than to VLAN 5. This prevents me from getting a DHCP address on my client and I don't even see the DHCP attempt. I watch the logs and the VPN clients are definitely on VLAN 2, rather than VLAN 5 which then drops all packets because it's trying to use a VLAN 5 IP address on VLAN 2. Not sure what is going on here.... Please let me know if I need to clarify anything or need to take screenshots. Anyone have any ideas? Thanks!

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.