Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SG-2100 dropping LAN connections with EM7305 Cellular WAN

    Scheduled Pinned Locked Moved Wireless
    22 Posts 2 Posters 1.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      why @stephenw10
      last edited by

      @stephenw10

      I think CA is allocated by tower based on bands you allow on the client. I believe that if your modem is set to band group 09 (LTE ALL), then the tower cell should enable carrier aggregation based on other metrics that are dynamic and ISP dependent. (...... but would welcome being corrected if this is not correct).

      with AT!GSTATUS? command I see that my LTE CA state is "NOT ASSIGNED" I also see a bunch of signal quality and power measurements which might be useful to share.

      I suspect mine are worse that yours and would be interested to note what you see.

      RSRP = -118 dBm [ (-44dBm = good) <=> (-140dBm=Bad)]
      RSRQ = -14.5 dB [ (-3dB=good) <=> (-19.5dB=Bad)]
      SINR = 2 dB

      RSRP = average received power from ref signal
      RSRQ = indication of received signal quality
      SINR = Signal to Noise Ratio

      Overall I have felt that I am on outer edge of cell coverage and it is reflected in signal metrics above (UL/DL speeds and link metrics leaning to "Bad" end of scale). Given your higher data rates from EM7305 tests, I would be interested to know what your power figures are when seeing performance similar to what you reported in thread above ( 21.5Mbps DL / 26.3Mbps UL).

      If your wireless performance is much better than mine reported above, it hints that "maybe" there is some correlation between quality of wireless link and stability of SoC firmware controlling embedded switch. ..... yeah a stretch I know, but thats where I am at the moment as I cannot use SG2100 with an integrated modem like I bought it for.

      Thoughts?

      Is it worth trying to switch it out for a 3100 to test it?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        I'm in London so signal strength is usually good. I've made no real effort to position it for better signal and it's surrounded by other firewalls etc. I see (last week):

        !GSTATUS: 
        Current Time:  1550848		Temperature: 44
        Bootup Time:   0		Mode:        ONLINE         
        System mode:   LTE        	PS state:    Attached     
        LTE band:      B3     		LTE bw:      15 MHz  
        LTE Rx chan:   1392		LTE Tx chan: 19392
        EMM state:     Registered     	Normal Service 
        RRC state:     RRC Connected  
        IMS reg state: No Srv  		
        RSSI (dBm):    -71		Tx Power:    0
        RSRP (dBm):    -95		TAC:         048C (1164)
        RSRQ (dB):     -7		Cell ID:     000E1F02 (925442)
        SINR (dB):     14.2
        

        That's the EM7305 in an SG-2100 with random antennas!

        I don't see anything listing CA state.

        Steve

        1 Reply Last reply Reply Quote 0
        • M mmkkoo referenced this topic on
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.