Announcing pfSense plus
-
@jwj Isnt this what Gold subscriptions is for??
-
@cool_corona Was. I bought in, twice. I suppose not enough did to pay the bills.
In an ideal world none of this would be talked about. It's not an ideal world. Programmers, project managers and support people need to get paid. FOSS projects need commercial support and funding.
We'll see how things go. There is time. I don't see this like Ubiquiti, no one is violating licenses and sucking capital out of the business. It may yet end up being a win for all concerned. Fingers crossed. If not, we'll just have to adjust and move on.
-
@jwj Its the worlds must trusted OS firewall as Netgate states it....
There should be a userbase large enough to support Netgate and the staff.
Otherwise the value proposition is not good enough.
-
@cool_corona said in Announcing pfSense plus:
Otherwise the value proposition is not good enough.
We'll each have to do that calculation for ourselves. No one is forcing anyone to use pfSense CE or to use the plus version when it rolls out.
If I had a bank account that would allow me to write a check, make it good and free for everyone, I would. Those who do don't.
In case anyone thinks I'm a fan boy or apologist I'll share some of my activities from the last few days. Downloaded VyOS and setup a build environment. Had a good look around at what a used Cisco ISR costs, what licenses would I have to pony up for. Thought about how I would setup a standalone DHCP/DNS server that isn't Microsoft. I even had a browse around the forums over at Ubiquiti to see what is up with the 2.x version of the edge router SW. I'm not pretending that nothing has changed, I'm also not panicking.
-
@jwj Mikrotik, IPfire, OPNsense is alternatives that could be worth considering.
So again the value proposition of a pfsense plus pricing model would be challenged with far more paid options out there.
A free version with paid support as it is/was is a much more viable option since it narrows the options out there of OSS Fw's
-
If you want to use something else, do so. At this point I don't see any amount of complaining that is going to change anything with Netgate in the short term.
I may very well make a change. Not because pfSense is no longer viable but because I just want to. I just bought a multi-layer switch (Ruckus ICX7150-48p) and may rethink things around that.
If, in the end, Netgate made a mistake than they will suffer the consequences of that. Such is life...
-
@johnpoz said in Announcing pfSense plus:
Where have they stated that their appliances will not run CE if they want?
Emm right in their FAQ. The ARM devices won't run on CE as there's no CE version for ARM. So SG1100-3100 are locked in on the closed source branch. :)
@al said in Announcing pfSense plus:
So a clear statement about whether the changes related to the new middleware and new GUI eventually will go into pfSense CE (open source) would make people happy in respect to continuing using pfSense...
That's the point. I have customers that asked about a good CLI, an API etc. for years. And that won't tolerate closed source either. So reading about a Go based WebUI, Clixon CLI like TNSR and API is nice indeed but if those changes WON'T go into CE (as CE is no longer "upstream" for FE/Plus) than they'll seriously look for alternatives. Also those changes or updates were promised over and over from no less then Jim or other Netgate folks even in Reddit, Twitter etc. so currently talking about them only being in Plus and no mentioning of CE getting those features as well (what would be important for package developers, too, as they could access internal functions way better via API then now!) is still dragging things along. Without a direct answer to that question no one can plan projects in the long term anymore that will cost us customer base and potential migration candidates (from other systems).
So nice blog post but still too vague.
-
Hello!
Isnt pfsense, in large part, just some code that provides a nice gui for installing/configuring underlying software?
Is the base OS that pfsense configures going closed source?
When I run "pkg info" from the shell I see a crapload of packages. Aside from maybe the "pfsense-pkg-*" ones, are any of those going closed source?
With pfsense+, will I be able to go in and look at the config files that pfsense is creating for the OS and packages?
Is pf going away and being replaced with something closed?John
-
@jegr said in Announcing pfSense plus:
So SG1100-3100 are locked in on the closed source branch. :)
And have been all along? That's my understanding, the factory images have had closed source components.
It's just the differences are going to become much bigger.
For sure if you're a ARM based Netgate appliance user and a FOSS purest you're out of luck.
-
My question was more of a what if scenario. I will split it in 2 -- as I think about this more.
-
Assume that the user upgrades to pfSense+ using the free "no-charge" option -- is he breaking the licence agreement because of his businesses? Or would it be ok, as he is using it for his personal use (in a home scenario)
-
Assume that the user stays on the CE version as they do not need any of the ZeroTier, Business dashboard etc features that you mentioned -- Would this mean that this user would be stuck on the current version for life? -- given that only security patches are promised for CE and none of the new features. The user might not need any features today, but he may need it in the future or he may need 1 particular feature that has yet to be developed.
Thanks
-
-
@al said in Announcing pfSense plus:
It can be interpreted in more ways - like they would like to evolve/extend driving code upstream, but it can also be interpreted as pfSense CE is not going to get updates forever.
So a clear statement about whether the changes related to the new middleware and new GUI eventually will go into pfSense CE (open source) would make people happy in respect to continuing using pfSense...And that is where the crux of the issue is. My interpretation is that CE is not going to get anything except security patches -- unless someone from the community or another sponsor is willing to take up CE and carry it forward as pfSense itself (probably under Netgate as the steward due to copyrights on the "pfSense" name) or as a completely different fork under a new name/management.
-
@johnpoz said in Announcing pfSense plus:
Is he even using netgate appliances?
Damn. can't edit posts in this sub-forum -- but no the user is not using netgate appliances at the moment.
@johnpoz said in Announcing pfSense plus:
My point was towards, if he is not running an appliance now - then plus is quite a bit off.. + when it first comes out is only going to be for appliances.
Won't even have the choice to run + on his own hardware for some time.. So its a bit early in the game to get all worked up over anything.Correct. It's not going to be available for non-Netgate devices. But in my opinion it's not early to get worked up about. When people are using this software as the basis of their entire network -- and especially if they are also conducting business -- then livelihoods depend on it. They don't want to be left in a position where they have 15-30 days to change to a new platform -- whatever that may be. And before you say it, yes Netgate may provide ample time possibly -- but that is not a chance that all users might be willing to take
@jwj said in Announcing pfSense plus:
In case anyone thinks I'm a fan boy or apologist I'll share some of my activities from the last few days. Downloaded VyOS and setup a build environment. Had a good look around at what a used Cisco ISR costs, what licenses would I have to pony up for. Thought about how I would setup a standalone DHCP/DNS server that isn't Microsoft. I even had a browse around the forums over at Ubiquiti to see what is up with the 2.x version of the edge router SW. I'm not pretending that nothing has changed, I'm also not panicking.
Same here. I have started looking at alternatives but I am in no rush to move. This gives me time to evaluate other options like VyOS, IPFire & even OPNSense. I chose pfSense the last time I was in this position moving from DD-WRT because OPNSense wouldn't even recognize my PATA HDD -- but then again it was early 2016 and OPNSense was in it's infancy.
I am not making any money out of using any particular router/firewall software as I use it only for my home/hobby use and maybe a bit of the self satisfaction that as a slight bit more technical than my family and friends, I can claim that I built my own router and my network is safer than their $60 off-the-shelf wireless router. So any costs that would need to be paid for a licence will definitely have to be weighed against other available solutions (free or paid) and this will be different for each and every user.
-
@inxsible said in Announcing pfSense plus:
They don't want to be left in a position where they have 15-30 days to change to a new platform
Where did you get that estimate of days from? You are never required to update - shit we have people here all the time running version 1.x for gosh sake..
Not like its going to stop working when they rollout +, or when they roll out plus for your own hardware, etc. etc.
They have made announcement about changes that are coming - that are not here yet. And nothing has been set in stone..
They announced a new version +, which in this first release is no different than CE when it comes out as 21.02 version..
And has been stated there will be a 2.6 CE version, etc.
You would think they announced the sky is falling, and we have all these chicken little's running around screaming...
I have seen a couple of shitposts over on reddit that are exactly that - its over, jumping ship to xyz.. My Gawd People.. They made a freaking announcement of NEW stuff coming... If your in the business world - you should be excited that hey your finally going to get the stuff you been asking for years.. If couple years down the road you feel they are not updating the CE version enough - then find something else you like..
But that sure and the hell isn't 30 days out, or this summer or this freaking year even.
-
@jwj said in Announcing pfSense plus:
This sounds reasonable, even generous.
I read the "blog" several times and digested the information for a week, it seems to me that CE and Plus will go their separate ways after a while...
CE will continue to be Netgate's experimental "petri dish", a lot of good info comes from this source.
In that case, if Plus gets a reasonable price and supports 3-party hardware(s), it’s still worth switching to PLUS.
Of course, if you use it a higher level than HOME and LAB.
-
The one thing that will cause me to drop pfSense like a hot rock is FUD and forum drama.
It amazes me that people with 99 pieces of gold in their hand will complain about the one piece of coal on the ground.
-
@johnpoz said in Announcing pfSense plus:
Where did you get that estimate of days from?
Out of my ass really -- to be crude about it. Which would have been obvious if you read my immediate next statement that "And before you say it, Netgate may provide ample time possibly". In your own words
@johnpoz said in Announcing pfSense plus:
And nothing has been set in stone..
The whole point was that some users might not want to wait until such an announcement is made and may want to make plans ahead of time.
@johnpoz said in Announcing pfSense plus:
You would think they announced the sky is falling, and we have all these chicken little's running around screaming...
I certainly didn't say that. In fact I even mentioned that I am in no rush. That doesn't mean I can't evaluate other options even if it's just to find out whether they will satisfy my needs. I may not even move to those if I don't like something about them (UI or the way they spell something). My only concern is if the CE version will be left hanging dry & stagnate and I realize that it may not be this year, but it will eventually is what I understand from the announcement.
I guess these questions will remain until Netgate provides a clear answer related to CE and what their plan is related to providing new features in CE.
-
@jwj said in Announcing pfSense plus:
The one thing that will cause me to drop pfSense like a hot rock is FUD and forum drama.
It amazes me that people with 99 pieces of gold in their hand will complain about the one piece of coal on the ground.Not entirely sure if that is directed at me, but I'll reply anyway.
I am not trying to spread FUD. If you read my entire statement, the "15-30 days" comment was just a way of making a point that some users might not wait until such an announcement is made to start planning changes especially to users who have purchased subscriptions and since Netgate hasn't clarified their position with regards to the CE version's future when it comes to new features etc.
-
@inxsible No, not aimed at you. Sorry if it seamed so.
-
@jwj said in Announcing pfSense plus:
forum drama.
Understandably, people scream a little at the beginning, but the test of pudding is the swallowing...
I envy it because that Ruckus switch is good stuff ...
-
@johnpoz said in Announcing pfSense plus:
You would think they announced the sky is falling, and we have all these chicken little's running around screaming...
When something is not well known or fully understand, people fill the gaps and imagine whatever is possible. It's just basic human behavior.
Maybe there have been some poor choices in communication here.
One example: explaining that going close source is for protecting the open-source community and the guys who forked from some disruptive changes is, at best, dubious. Imo, it does not make any sense. If disruption is really a concern, there is no need to go close source: an open-source fork from pfSense CE to pfSense plus would achieve exactly the same goal. So, what does this really mean ?
Similarly, when saying on one hand that the two versions will diverge more and more and, on the other hand, that the advancement of CE will mainly depend "how the project progresses itself, separate and distinct from Netgate", what should be understand other than Netgate is starting to disinvest from the development of CE ?
