Announcing pfSense plus

slu

@kiokoman said in Announcing pfSense plus:

There will be CE releases after 2.6, but unlike Plus, they’ll be done when they’re ready, not on a regular cadence.

Works for Debian perfect ;)

What's the benefit for the community of these changes exactly?

Inxsible

I installed pfSense for a friend at his home. However he also runs 2 businesses from his home. How would the new licensing apply to him?

Will he be able to upgrade to pfSense+ without paying (since it's his home)? Or would he have to buy a pfSense+ licence given that he runs 2 businesses from his home?

johnpoz

None of that info has been put out yet.

But lets use a little common sense here - will these 2 bushiness he runs out of his home need the + features of pfsense? Will he need say "Zero Touch Provisioning for easier drop ship of unprovisioned appliances" ?

Will maybe need business level dashboard for all of his installs?

Will he maybe need "GUI / device control separation, which facilitates multi-instance management"

He will get + if he has an appliance - but some of these other so called features may need to be "licensed"

No costing model has been even hinted at yet..

Cool_Corona

@johnpoz

Question. Will it be up to you to decide what scenario he wants?

Its up to the user. Not to vendor to decide what the user needs or wants.

al

@jwj thanks for sharing the link to the updated post!

Unfortunately Scott does not tell why pfSense Plus cannot be open source too so the users are able to trust the code.
Also pfSense CE will slowly fall behind - well that is my interpretation of Scott's words:

...Where does that leave the pfSense CE releases? This is a burning question for our users, and for good reason. The pfSense community has been good to us, and we wouldn’t exist without it. In return, we’ve done our best to be good stewards in the community, both in terms of providing resources and in terms of our open source code commitment. We’re already planning a pfSense CE 2.6 release in mid-2021. We’re still fully participating in the open source communities that make up the foundation of pfSense, and we’re still driving that code upstream and into the open. This isn’t going away, but it is going to evolve as our code in pfSense Plus evolves. ....

It can be interpreted in more ways - like they would like to evolve/extend driving code upstream, but it can also be interpreted as pfSense CE is not going to get updates forever.
So a clear statement about whether the changes related to the new middleware and new GUI eventually will go into pfSense CE (open source) would make people happy in respect to continuing using pfSense...

johnpoz

@cool_corona said in Announcing pfSense plus:

Not to vendor to decide what the user needs or wants.

When has that ever been the case? If he has no need for any of the stuff that will be part of + he can just use CE.

Is he even using netgate appliances?

Cool_Corona

@johnpoz

But it doesnt matter....

Its irrelevant.

He is using OSS as a choice. If he is limited by any means by turning OSS into closed source, then he will run away or use a another vendor with a better feature set.

As I stated. The foreign Department here has denied use of closed for a reason.

So has many users and contributors over the years.

I have been a part of the user base since Manuel Kasper and M0n0wall.

There is no doubt that people will turn to other vendors offering OSS aplliances.

johnpoz

Where have they stated that their appliances will not run CE if they want?

My point was towards, if he is not running an appliance now - then plus is quite a bit off.. + when it first comes out is only going to be for appliances.

Won't even have the choice to run + on his own hardware for some time.. So its a bit early in the game to get all worked up over anything.

@cool_corona said in Announcing pfSense plus:

He is using OSS as a choice. If he is limited by any means by turning OSS into closed source, then he will run away or use a another vendor with a better feature set.

What FOSS solution has a better feature set/stability than pfSense? I added stability because that matters to me...

Look, that way I read this is: The amount of work that needs to be done to advance pfSense, rewrite the GUI and remove bottlenecks, will require significant investment. Netgate needs to be able to pay for that. If the community wants to do that and keep all of it FOSS they should do that and create a fork immediately.

Cool_Corona

@jwj Isnt this what Gold subscriptions is for??

@cool_corona Was. I bought in, twice. I suppose not enough did to pay the bills.

In an ideal world none of this would be talked about. It's not an ideal world. Programmers, project managers and support people need to get paid. FOSS projects need commercial support and funding.

We'll see how things go. There is time. I don't see this like Ubiquiti, no one is violating licenses and sucking capital out of the business. It may yet end up being a win for all concerned. Fingers crossed. If not, we'll just have to adjust and move on.

Cool_Corona

@jwj Its the worlds must trusted OS firewall as Netgate states it....

There should be a userbase large enough to support Netgate and the staff.

Otherwise the value proposition is not good enough.

@cool_corona said in Announcing pfSense plus:

Otherwise the value proposition is not good enough.

We'll each have to do that calculation for ourselves. No one is forcing anyone to use pfSense CE or to use the plus version when it rolls out.

If I had a bank account that would allow me to write a check, make it good and free for everyone, I would. Those who do don't.

In case anyone thinks I'm a fan boy or apologist I'll share some of my activities from the last few days. Downloaded VyOS and setup a build environment. Had a good look around at what a used Cisco ISR costs, what licenses would I have to pony up for. Thought about how I would setup a standalone DHCP/DNS server that isn't Microsoft. I even had a browse around the forums over at Ubiquiti to see what is up with the 2.x version of the edge router SW. I'm not pretending that nothing has changed, I'm also not panicking.

Cool_Corona

@jwj Mikrotik, IPfire, OPNsense is alternatives that could be worth considering.

So again the value proposition of a pfsense plus pricing model would be challenged with far more paid options out there.

A free version with paid support as it is/was is a much more viable option since it narrows the options out there of OSS Fw's

If you want to use something else, do so. At this point I don't see any amount of complaining that is going to change anything with Netgate in the short term.

I may very well make a change. Not because pfSense is no longer viable but because I just want to. I just bought a multi-layer switch (Ruckus ICX7150-48p) and may rethink things around that.

If, in the end, Netgate made a mistake than they will suffer the consequences of that. Such is life...

JeGr

@johnpoz said in Announcing pfSense plus:

Where have they stated that their appliances will not run CE if they want?

Emm right in their FAQ. The ARM devices won't run on CE as there's no CE version for ARM. So SG1100-3100 are locked in on the closed source branch. :)

@al said in Announcing pfSense plus:

So a clear statement about whether the changes related to the new middleware and new GUI eventually will go into pfSense CE (open source) would make people happy in respect to continuing using pfSense...

That's the point. I have customers that asked about a good CLI, an API etc. for years. And that won't tolerate closed source either. So reading about a Go based WebUI, Clixon CLI like TNSR and API is nice indeed but if those changes WON'T go into CE (as CE is no longer "upstream" for FE/Plus) than they'll seriously look for alternatives. Also those changes or updates were promised over and over from no less then Jim or other Netgate folks even in Reddit, Twitter etc. so currently talking about them only being in Plus and no mentioning of CE getting those features as well (what would be important for package developers, too, as they could access internal functions way better via API then now!) is still dragging things along. Without a direct answer to that question no one can plan projects in the long term anymore that will cost us customer base and potential migration candidates (from other systems).

So nice blog post but still too vague.

serbus

Hello!

Isnt pfsense, in large part, just some code that provides a nice gui for installing/configuring underlying software?
Is the base OS that pfsense configures going closed source?
When I run "pkg info" from the shell I see a crapload of packages. Aside from maybe the "pfsense-pkg-*" ones, are any of those going closed source?
With pfsense+, will I be able to go in and look at the config files that pfsense is creating for the OS and packages?
Is pf going away and being replaced with something closed?

John

@jegr said in Announcing pfSense plus:

So SG1100-3100 are locked in on the closed source branch. :)

And have been all along? That's my understanding, the factory images have had closed source components.

It's just the differences are going to become much bigger.

For sure if you're a ARM based Netgate appliance user and a FOSS purest you're out of luck.

Inxsible

@johnpoz

My question was more of a what if scenario. I will split it in 2 -- as I think about this more.

Assume that the user upgrades to pfSense+ using the free "no-charge" option -- is he breaking the licence agreement because of his businesses? Or would it be ok, as he is using it for his personal use (in a home scenario)
Assume that the user stays on the CE version as they do not need any of the ZeroTier, Business dashboard etc features that you mentioned -- Would this mean that this user would be stuck on the current version for life? -- given that only security patches are promised for CE and none of the new features. The user might not need any features today, but he may need it in the future or he may need 1 particular feature that has yet to be developed.

Thanks