squid not working with pppoe wan

aminbaik

Hello,
i have pppoe wan on my pfsense , i tried to enable squid but its not working i get
The Outgoing Network Interface must have an IPv4 address.
so where is the problem and what i can do ?
Thanks.

viktor_g

@aminbaik Unable to reproduce

I can successfully set PPPoE interface as Outgoing Network Interface

aminbaik

@viktor_g said in squid not working with pppoe wan:

oing Network

how i can do that ?

viktor_g

@aminbaik Please provide more info about your configuration,
also show the ifconfig output

aminbaik

@viktor_g

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 00:e2:69:18:f6:3d
	hwaddr 00:e2:69:18:f6:3d
	inet6 fe80::2e2:69ff:fe18:f63d%em0 prefixlen 64 scopeid 0x1
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 00:e2:69:18:f6:3e
	hwaddr 00:e2:69:18:f6:3e
	inet6 fe80::2e2:69ff:fe18:f63e%em1 prefixlen 64 scopeid 0x2
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
em2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 00:e2:69:18:f6:3f
	hwaddr 00:e2:69:18:f6:3f
	inet6 fe80::2e2:69ff:fe18:f63f%em2 prefixlen 64 scopeid 0x3
	inet 192.168.10.2 netmask 0xffffff00 broadcast 192.168.10.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
em3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 00:e2:69:18:f6:40
	hwaddr 00:e2:69:18:f6:40
	inet6 fe80::2e2:69ff:fe18:f640%em3 prefixlen 64 scopeid 0x4
	inet 192.168.11.1 netmask 0xffffff00 broadcast 192.168.11.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo
enc0: flags=0<> metric 0 mtu 1536
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: enc
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
pppoe1: flags=89d1<UP,POINTOPOINT,RUNNING,NOARP,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1492
	inet6 fe80::2e2:69ff:fe18:f63d%pppoe1 prefixlen 64 scopeid 0x9
	inet x,x,x,x --> x.x.x.x netmask 0xcccccc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pppoe0: flags=89d1<UP,POINTOPOINT,RUNNING,NOARP,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1492
	inet6 fe80::2e2:69ff:fe18:f63d%pppoe0 prefixlen 64 scopeid 0xa
	inet x.x.x.x --> x.x.x.x netmask 0xffffffff
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>```

viktor_g

I see that you have IPv4 address on both PPPoE interfaces
What did you select in the "Listen IP Version" option?

aminbaik

@viktor_g ipv4