IPv6 No Gateway after 2.5 upgrade

pete

Ahhh....thank you Marco.

So where did you get the IP6 gateway address and where did you install it?

Do you have the temp files /tmp/em0_routerv6 and /tmp/em0_defaultgwv6 with the IP6 gateway address before you removed the diff changes?

Today did a new 2.5 build on my PFSense hot spare box. IP6 worked out of the box. Have to test OpenVPN and IPSec VPN on it first.

Will drop this box in to place after configuring add ons the rebuild the updated machine from scratch.

Using monitoring function here because primary WAN is cable and secondary WAN is a T-Mobile LTE CPE.

MarcO42

@pete
Hi,
the IP6 is set like the IP4. After a reconnect its there. (Like magic ;) )
And yes, I had these files (named on my side with pppoe) before.
I double checked it right now and I think I found somthing strange.
I have the old file already in place but please take a look:

[2.5.0-RELEASE]/root: ls -al /tmp/pppoe_r*
-rw-r--r--  1 root  wheel  14 Mar  3 03:50 /tmp/pppoe0_router
-rw-r--r--  1 root  wheel   1 Mar  3 03:50 /tmp/pppoe0_routerV6
-rw-r--r--  1 root  wheel  26 Mar  3 03:50 /tmp/pppoe0_routerv6

Then I checked my script and I saw that I made a mistake that fixed my issue:

        $rtsoldscript .= "echo $2 > {$g['tmp_path']}/{$wanif}_routerV6\n";

I think that in the original script create this file (**_routerv6*) with emptiy content.
Maybe the function file_put_contents() is afterwards not able to recreate or fill the file with content?

After I chnaged it to a file named _routerV6 with an upper V another prozess created the correct file.

So my solution for me is now this:

        $rtsoldscript .= "# echo $2 > {$g['tmp_path']}/{$wanif}_routerv6\n";

Cheers

SteveITS

@marco42 I figured I'd just check for you as we have one on 21.02 and others on 2.4.5. I found interesting results from "ls -l /tmp/mvneta*" (the interface on SG-2100):

21.02:
-rw-r--r-- 1 root wheel 12 Feb 27 00:37 /tmp/mvneta0_defaultgw
-rw-r--r-- 1 root wheel 1 Feb 27 00:37 /tmp/mvneta0_defaultgwv6
-rw-r--r-- 1 root wheel 0 Feb 27 00:37 /tmp/mvneta0_dhcp6_complete
-rw-r--r-- 1 root wheel 0 Feb 27 00:37 /tmp/mvneta0_error_output
-rw-r--r-- 1 root wheel 244 Feb 27 00:37 /tmp/mvneta0_output
-rw-r--r-- 1 root wheel 13 Feb 27 00:37 /tmp/mvneta0_router
-rw-r--r-- 1 root wheel 1 Feb 27 00:37 /tmp/mvneta0_routerv6

2.4.5p1:
-rw-r--r-- 1 root wheel 9 Feb 19 00:22 /tmp/mvneta0_defaultgw
-rw-r--r-- 1 root wheel 26 Feb 15 15:28 /tmp/mvneta0_defaultgwv6
-rw-r--r-- 1 root wheel 0 Feb 19 00:24 /tmp/mvneta0_error_output
-rw-r--r-- 1 root wheel 577 Feb 19 00:25 /tmp/mvneta0_output
-rw-r--r-- 1 root wheel 10 Feb 19 00:25 /tmp/mvneta0_router

On BOTH, Status/Gateways shows "WAN_DHCP6 (default)" as Pending and IPv6 is working. So perhaps the Pending status is not new in 2.5? Note 2.4.5 does not have "mvneta0_routerv6" either.

MarcO42

@teamits said in IPv6 No Gateway after 2.5 upgrade:

21.02:
-rw-r--r-- 1 root wheel 1 Feb 27 00:37 /tmp/mvneta0_routerv6

Hi Steve,
your file have a size of 1 Bytes. It looks like that this is the same issue like my. Are you able to edit /etc/inc/interfaces.inc and change line 5145 like I did to validate if my fix works?
Cheers

pete

@marco42

Thank you @marco42.

Here made the mistake of removing all IP6 related temp files and GUID file to start from scratch on the IP6 configuration file.

Then reconfigured IP6 on the WAN / LAN pieces. Doing this and nothing else showed IP6 pending and working IP6 internet and empty temp files. Edited the temp files to show the local IP6 gateway and all appears fine. Later on edited the diff file with the IP6 local gateway address and that is what is showing in the gateway dashboard section.

Today bringing up test hot swap box with new V2.5 on it to see what happens and if IP6 works.

SteveITS

@marco42 I noticed that. But IPv6 is working for both these routers...can ping from the router or PCs behind it. The router has a default route for IPv6 in Diagnostics/Routes, just no gateway shown in Status/Interfaces. These are two locations and two ISPs (AT&T and Comcast).

chicaneau

@marco42 Hey I'm new to this bug, but I thought i could provide some input

I have attempted your fix on lines 5145 and 5146 with no success. It is not creating the v6 files in /tmp but it does seem to update the script @ /var/etc/rtsold_em0_script.sh

If i manually create those 2 files em0_routerv6 and em0_defaultgwv6 then the gateway shows in the front-end on both the dashboard and the gateway status screen. instead of 'dynamic' and '~' respectively. This however doesnt seem to apply to the firewall rules or whatever else is wrong, i assume something has to restart... i did 'reapply filters' on the firewall but this didnt help. I also 'saved' my WAN interface and this didnt help either. In fact it deleted the 2 em0_* files.

My RA setting is on unmanaged and i have dhcpv6 disabled. This is how I had it setup on 2.4.5 where it worked perfectly. My clients are not receiving an ipv6 address.

I also noticed that on a cold boot that my WAN/LAN interfaces have no ipv6 address at all. They only receive an address after i either save the WAN interface screen or release/renew the WAN address in interface status.

Im happy to try any suggestions, cheers

g.shaffer

@chicaneau

If your WAN is not set to DHCP6, what is it set to (e.g. Static)?
My WAN interface is set to DHCP6 with "Use IPv4 connectivity...", "Send IPv6 prefix hint", "Debug" and "Do not allowPD/Address..." checked. "Do not wait for a RA" is not checked.

chicaneau

@g-shaffer Ahh sorry, i should have been clear. My WAN type is DHCP6. My LAN DCHP6 server is turned off. under Services -> DHCPv6 Server & RA -> DHCPv6 Server.

Under WAN i have.

config type = "DHCP6", Send IPv6 prefix hint = ticked, Do not wait for a RA= ticked, Do not allow PD/Address release = unticked.

Under Router Advertisements i have Router mode = "unmanaged" and everything else blank/default

These are the exact settings i have on 2.4.5 which worked perfectly from cold boot with no issues.

chicaneau

@chicaneau EDIT: it appears the script started working after i unset the ipv6 type in the WAN config and set it to DHCP6 again. I also only set my DHCPv6 Prefix Delegation size to 56 (as per isp recommendation) and left all else unticked in the ipv6 settings.

I still have no ipv6 connectivity from any windows devices. ping6 in the pfsense shell is working for external addresses

the ipv6 gateway now shows online and shows the gateway ipv6 address instead of "~"

pete

I still have no ipv6 connectivity from any windows devices. ping6 in the pfsense shell is working for external addresses

Initially iPFSense shell was the only way to ping6 IP6 addresses. Not my LAN devices. Then I set RA to the following and it worked.

Try setting:

Services / DHCPv6 Server & RA / LAN / Router Advertisements

Stateless DHCP
Will advertise this router with stateless autoconfig and other configuration information available via DHCPv6.

I did this and see IP6 addresses from any LAN connected device and pass all IP6 testing from laptop / desktop. Here is an Ubuntu terminal window.

root@ICS-IBM-T540P-0:/home/pete# ping6 2001:4860:4860::8888
PING 2001:4860:4860::8888(2001:4860:4860::8888) 56 data bytes
64 bytes from 2001:4860:4860::8888: icmp_seq=1 ttl=113 time=13.7 ms
64 bytes from 2001:4860:4860::8888: icmp_seq=2 ttl=113 time=14.7 ms
64 bytes from 2001:4860:4860::8888: icmp_seq=3 ttl=113 time=14.5 ms
64 bytes from 2001:4860:4860::8888: icmp_seq=4 ttl=113 time=11.5 ms
64 bytes from 2001:4860:4860::8888: icmp_seq=5 ttl=113 time=11.6 ms

For Windows 10 it use ping or ping -6 in command prompt or power shell.

mloiterman

This is incredibly frustrating.

I have changed and tried nearly every ipv6 setting in my 2.5 install and I cannot get it to route ipv6 at all.

I have reinstalled 2.5 and migrated configuration and it just continues to give this error:

There were error(s) loading the rules: /tmp/rules.debug:315: no routing address with matching address family found. - The line in question reads [315]: pass in quick on $LAN1_PRIMARY $GWDefault_Gateway_Group_ipv6 inet6 from xxx:xxx:xxx:xxx::/64 to any tracker 1436634070 keep state label &quot;USER_RULE: LAN1 -&gt; any Default IPv6&quot;

2.4.5 worked perfectly with this config.

g.shaffer

@mloiterman
I've noticed some issues with the IPv6 routing tables, it doesn't look like routes are getting setup when you enable IPv6 on an interface. After setting up an interface, DHCPv6 and RA for the interface (VLAN), I've rebooted by FW and IPv6 routing starts working for clients on the VLAN. I've also had issues setting up interfaces as "Track Interface" and gone to Static IPv6 address allocations on my local network interfaces.

chicaneau

@pete This kind of works... I now have 2 IPv6 addresses and a temporary ipv6 address on my win10 device. But it still feels like the routing is broken. All pings fail, attempting to load any ipv6 site in the browser just falls back to ipv4

https://ipv6-test.com/ completely fails.
It really feels like a firewall or routing issue. I'm at a loss, cant believe how broken this is.

g.shaffer

@chicaneau

Given how this issue cascades throughout the system - it breaks the gateway, routing, firewall rules, etc. I amazed that netgate doesn't appear to be looking at this. IPv6 was rock solid in 2.4.5-p1, seems to have been broken in 2.5.0!

pete

@chicaneau

Try this:

1 - remove all of the IP6 related stuff on your WAN / LAN links.
2 - TFTP to the /tmp directory and remove all related IP6 entries.
3 - reboot PFSense and your modem
4 - re-enable IP6 on WAN / LAN interfaces.

See if that works.

chicaneau

@pete tried this. No difference. I’m on the cusp of giving up on this. Might need someone much smarter than me to resolve the underlying routing issues

lohphat

I'm seeing similar behavior on SG-3100 21.02_1. Speculum (NYC)

I have to manually specify a monitoring IPv6 address (or disable monitoring and assume it's up).

MikeV7896

@mloiterman If you're routing with rules, that's another effect of this gateway issue. If the gateway doesn't populate, there's no gateway to be selected in the rules. Some have found a way around by manually creating files or manually editing scripts, but there's been no progress on a formal fix for this bug that I'm aware of.

chicaneau

@virgiliomi its so strange, everything seems fine for me, all the right values are in the right fields in the UI. in the routing table i have a route to my isp gateway FE80 address and i can ping out to anything from the router itself. it just seems something is blocking my devices from seeing anything. Either firewall or routing... but i dont really know how to be sure which.

I've tried adding firewall rules for allow all on lan ipv6 etc to see if i can get some traffic moving, but nothing happens.

I've just noticed my LAN adapter has no link local address..... perhaps this is part of the non-communication issue?