Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfSense Plus and SG-3100

    Official Netgate® Hardware
    31
    152
    33.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mcury @stephenw10
      last edited by

      @stephenw10 said in pfSense Plus and SG-3100:

      Yes, I did that on another test box that has never had pfBlocker installed and there are no default lists.

       UPDATE PROCESS START [ 03/12/21 15:20:15 ]

Clearing all DNSBL Feeds... 
** DNSBL Disabled **


===[  Continent Process  ]============================================


===[  Aliastables / Rules  ]==========================================

No changes to Firewall rules, skipping Filter Reload
No Changes to Aliases, Skipping pfctl Update

 UPDATE PROCESS ENDED

      So if you are seeing lists it's because they already exist on your config and pfBlocker is using them.

      What lists do you see?

      Steve

      If that is the case, the same lists that pfblockerng 3.0.0_15 has, because it was the last pfblockerng version installed.

      1 Reply Last reply Reply Quote 0
      • M
        mcury @SteveITS
        last edited by

        @teamits found another way to trigger it.. not sure if it's the same problem, but try:

        ssh to pfsense and type:
        gpioctl 2 0

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          @mcury said in pfSense Plus and SG-3100:

          gpioctl 2 0

          Hmm, interesting. Not the same issue though, php is not involved there:

          Mar 14 13:52:52 	kernel 		pid 32606 (gpioctl), jid 0, uid 0: exited on signal 11 (core dumped)

          Likely that's because the first GPIO device cannot be set like that. You can set a PWM duty there. It should not segfault though.

          Steve

          M 1 Reply Last reply Reply Quote 1
          • M
            mcury @stephenw10
            last edited by

            Any news about this issue?

            bb0d9657-ecf5-4071-bcfb-9a8ee4825ef6-image.png

            #11466 latest update on 03/11/21, nobody is assigned to that task..

            Searched for this PHP bug in https://bugs.php.net/ and couldn't find anything about this PHP interpreter error for ARM 32 bits and/or Freebsd..

            1 Reply Last reply Reply Quote 1
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Nothing specific yet I'm afraid. We are looking at it though just no-one has been assigned in Redmine. Details will be on the bug report there as we confirm them.
              We have a separate internal report we use until we have something useful to add publicly.

              Steve

              M 1 Reply Last reply Reply Quote 1
              • M
                mcury @stephenw10
                last edited by

                @stephenw10 Thanks Stephen.

                I didn't know about the separate internal report.

                B 1 Reply Last reply Reply Quote 0
                • B
                  bigchimpin Banned @mcury
                  last edited by

                  I can't believe I paid almost $500 for this router lol

                  M 1 Reply Last reply Reply Quote 1
                  • M
                    mcury @bigchimpin
                    last edited by

                    There is one bug that the affected version is incorrect for the SG-3100 , #11473

                    1 Reply Last reply Reply Quote 0
                    • LuketaL
                      Luketa
                      last edited by

                      I continue with version 2.4.5_1 on the SG-3100
                      I saw that it came out of version 21.02.2, is it stable?

                      I plan to update this week from 2.4.5 to 21.02.2

                      M AmarandA 2 Replies Last reply Reply Quote 1
                      • N
                        NOCling
                        last edited by

                        My SG-3100 runs nice with 21.02.2.

                        Netgate 6100 & Netgate 2100

                        B 1 Reply Last reply Reply Quote 1
                        • M
                          mcury @Luketa
                          last edited by mcury

                          Same here, didn't try snort/suricata.
                          Running smoothly with pfblockerng-devel 3.0.0_16

                          N 1 Reply Last reply Reply Quote 1
                          • N
                            NokkieF @mcury
                            last edited by

                            @mcury still experiencing same kernel alerts here

                            M 1 Reply Last reply Reply Quote 0
                            • AmarandA
                              Amarand @Luketa
                              last edited by Amarand

                              @luketa

                              There was a bug, during the standard upgrade from 2.4.5 to 21.02_2 (the hot fix), where the SG-3100 hung post-install with the triple-flashing-lights.

                              After connecting a serial console, and verifying no output, I power cycled the SG-3100, and it came back up fine, with the 21.02_2.

                              I upgraded from 21.02_2 to 21.02.2 (note the _ versus the .) yesterday, and it A) upgraded fine and B) has been running fine with no issues.

                              Please make sure you take a look at some of the persistent plugin related bugs associated with the 21.x line that are not present in the 2.4.5 code, to make sure you won't be impacted by these bugs, before you upgrade.

                              Edit: the SG-3100 comes with a serial cable, which you can connect up to a computer and run a serial terminal (like PuTTY or whatever), to watch the upgrade process. I'd recommend doing this, especially from 2.x to 21.x

                              1 Reply Last reply Reply Quote 1
                              • M
                                mcury @NokkieF
                                last edited by

                                @nokkief Can you share more details about your setup?
                                I've been testing for about 4 days, trying to crash the SG-3100 with high loads, and it seems to be pretty stable..

                                Are you using suricata/snort ?
                                Are you using pfblockerng-devel_3.0.0_16, and if so, what feeds?

                                N 1 Reply Last reply Reply Quote 1
                                • N
                                  NokkieF @mcury
                                  last edited by

                                  @mcury
                                  I am seeing this:

                                  2021-04-22 19:30:04.062460+02:00 	kernel 	- 	pid 73327 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 19:15:03.967524+02:00 	kernel 	- 	pid 27459 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 19:00:03.889566+02:00 	kernel 	- 	pid 8141 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:45:04.012638+02:00 	kernel 	- 	pid 56654 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:30:03.934697+02:00 	kernel 	- 	pid 48931 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:15:04.057781+02:00 	kernel 	- 	pid 94150 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:02:36.622513+02:00 	php 	25838 	[pfBlockerNG] No changes to Firewall rules, skipping Filter Reload
2021-04-22 18:00:04.180824+02:00 	kernel 	- 	pid 25987 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
2021-04-22 18:00:01.142905+02:00 	php 	25838 	[pfBlockerNG] Starting cron process.
2021-04-22 17:45:04.303922+02:00 	kernel 	- 	pid 79696 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped) ```
code_text

                                  I am running the following packages
                                  acme security 0.6.9_3
                                  haproxy net 0.61_1
                                  pfBlockerNG-devel net 3.0.0_16

                                  Not sure how I can easily retrieve the lists I am using, but I am using quite a few.

                                  M 1 Reply Last reply Reply Quote 0
                                  • M
                                    mcury @NokkieF
                                    last edited by

                                    @nokkief Those are the same errors I was getting before.
                                    I'm suspecting that the number of feeds is causing the crash.

                                    I would like to suggest you to remove pfblockerng-devel completely and reinstall.
                                    There is an option "keep settings" in pfblocker that you shouldn't tick before package removal.

                                    After that, save the pfsense xml configuration, edit it and confirm that there isn't a single entry for pfblockerng...
                                    I'm saying this because the 'old feeds' from previous versions remained in my XML configuration.

                                    After removing all the pfblockerng entries in xml, restore it, then reinstall pfblockerng.

                                    I did add dnsbl_easylists feed after the wizard, for me it is enough.
                                    You should add one feed at a time to test..

                                    b89aac5b-07f3-4105-8daa-192f6f8ebe2d-image.png

                                    N 1 Reply Last reply Reply Quote 0
                                    • N
                                      NokkieF
                                      last edited by

                                      Thanks, I will give it a go later. See if I can make them go away. It might also be haproxy, but it might be worth a shot trying

                                      1 Reply Last reply Reply Quote 1
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Yes, this looks like it's almost certainly php choking on a large list parsing function for as yet unknown reasons. Loading fewer or smaller lists in pfBlocker will likely avoid it.

                                        1 Reply Last reply Reply Quote 2
                                        • N
                                          NokkieF @mcury
                                          last edited by

                                          @mcury the pfsense config you refer to the one in /conf?

                                          N M 2 Replies Last reply Reply Quote 0
                                          • N
                                            NokkieF @NokkieF
                                            last edited by

                                            I reinstalled the pfBlocker. I though I cleaned it out pretty well, but it still picked up the PRI1 list (I do not remember this being automatic anyways). So far I do not see any issues in the logging. so it looks good so far. I will give an update later if I see any php errors.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post