Filter some routes
-
@pete35 said in Filter some routes:
@fmroeira86
Just enable it:
I've that enabled.
My ACL as a route with deny (position 1) and an allow all for all the other networks at position 2.
But All the routes still get advertised...
-
@fmroeira86
does it look like this: -
@pete35 said in Filter some routes:
@fmroeira86
does it look like this:OH!!!! I thought of that but mine doesn't show any "Distribute List" it says "None". I tried with Zebra ACL, Extended ACL and Standard ACL. Always show "none"
-
Yes i see it here too. This looks like a bug in the GUI. You may include it into the raw setting of the config.
-
Can you please show me where you include in the RAW config?
-
-
@pete35 I'll try that.
In the meantime I'll try to report this bug.
I don't really know where I should do that...
Thank you!
-
The GUI does not find the configured ACL Lists any more within Pfsense 2.5 and the Route Distribution section of the configuration.. There is only "None", no lists to choose.
Is this a bug? -
-
Please try to re-save your access/prefix lists
see https://forum.netgate.com/topic/160694/frr-7-3-7-5-bgp-not-announcing-routes
and https://redmine.pfsense.org/issues/11404 -
i did this several times, even created a new one, but the lists dont apear on the selection.
-
I confirm that the lists don't apear...
-
Please try this patch: 56.diff
Redmine issue: https://redmine.pfsense.org/issues/11511
-
@viktor_g said in Filter some routes:
Please try this patch: 56.diff
Redmine issue: https://redmine.pfsense.org/issues/11511
Can you please instruct on how to apply that?
-
@fmroeira86 you need to install System Patches pkg: https://docs.netgate.com/pfsense/en/latest/development/system-patches.html
and paste/apply diff -
@viktor_g Thank you!
-
I tried to apply the patch, but on my pfsense there is no
/net/pfSense-pkg-frr/files/usr/local/pkg/frr/frr_ospf.xmlthe whole /net path is empty. so the patch failed to test and cant apply.
frr_ospf.xml is on /usr/local/pkg/frr/frr_ospf.xml
is there anything which i do wrong?
-
-
Ok thank you, the patch works and the list are appearing in the selection fields now!
-
I tried to apply the patch without success.
What parameters did you set on "Patch Package" ?