Issue with upgrade and install latest version
-
Ok, looks to be loaded, yes.
Do you see a ure0 device in the logs at all? Are you loading that module at boot?
Steve
-
I would think it loaded the driver at boot because I didn’t have to load it manually.
Could the wrong driver affect the fact that it limits network traffic to a maximum of 500Mbps. I have a 1000Mbps lan network and in the previous version 2.4.5 everything worked perfectly.
-
Yes, it could. We have seen other cases where the cdce generic USB Ethernet driver performed significantly worse.
Check the logs for ure entries.Or course if could just be a bad NIC. It's both USB and Realtek which both have bad reputations in FreeBSD/pfSense.
Steve
-
Ok thanks, i will check logs. What i have to find there that i can find logs for ure (or where)?
-
Any mention of ure in the system log or dmesg or /var/log/dmesg.boot (if you have not rebooted for a while).
Steve
-
Here is pastebin:
https://pastebin.com/hsVEwz79
I can find
ure0 on uhub6
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 4> on usbus0 -
Mmm, OK that looks to be working correctly.
So you could get >500Mbps though it in 2.4.5, even without that driver?
Steve
-
Ok,
yes its limit my speed some reason , i have 1Gbit lan network and 200Mbps internet connection, download speed is only about 50Mbps from internet.
I try to install 2.4.5 back today and check what drivers that usb lan card will use, because 2.4.5, i get full speed from internet and lan to lan.
-
mmmm
I installed 2.4.5-p1 back and check, there is no ure.
[admin@pfSense.home.int]/root: kldstat
Id Refs Address Size Name
1 3 0xffffffff80200000 37191d8 kernel
2 1 0xffffffff83a21000 10c0 cpuctl.koAnd speed is normal, no limits.
-
Hmm, not sure what that is then.