pfBlockerNG aliases crashes firewall for SG-3100 v21.02_1
-
Hi!
I have been trying to use pfBlocker with my updated SG-3100 with version 21.02_1.
Tried the latest pfBlockerNG 3.0.0_15.As soon as pfBlocker adds an url alias that uses pfblockerng.php the firewall will crash at reboot when console says "Configuring firewall" and spits out Segmentation fault (core dumped).
To get access again I have to restart webconfigurator but not much is working in the firewall.
I have to remove the alias and reboot again to get it working correctly.pfblockerNG works when you set it up the first time.
But as soon as the next reboot it will crash the firewall.It does not matter how little I configure pfblockerng, enable and set up one alias it will fail.
Example alias that it creates for IPv4 PRI1:
https://127.0.0.1:443/pfblockerng/pfblockerng.php?pfb=pfB_PRI1_v4/illern
-
Just tested the same thing on my virtual pfsense with v2.5.0 CE.
On that system it works./illern
-
@illern There seem to be problems with PHP on the SG-3100. See thread https://forum.netgate.com/topic/161454/21-02-p1-really-fix-the-issue-on-sg-3100 and various others. Your VM is presumably not running on a 32 bit ARM CPU so is unaffected.
-
@teamits said in pfBlockerNG aliases crashes firewall for SG-3100 v21.02_1:
@illern There seem to be problems with PHP on the SG-3100. See thread https://forum.netgate.com/topic/161454/21-02-p1-really-fix-the-issue-on-sg-3100 and various others. Your VM is presumably not running on a 32 bit ARM CPU so is unaffected.
Ok I see that now. Thought the P1 patch had fixed the issue.
Will wait for updates. -
@illern p1 fixed the kernel lock issue but this is another :(