No states registerede under Rules after upgrade 2021-03-18
-
Upgraded to fix the IPv6 gateway problem, but now i don't have any states registered on Floating, LAN and WAN rules despite having traffic from WAN to LAN. The rules on WAN and LAN still seems to work as i can get online and the port forward i have seems to work, but fq_codel set up with floating pass rules doesn't work after upgrade to 2.6.0.a.20210318.0100. Anyone else seeing the same?
Edit:
Upgraded from a 2.6.0.a.20210317 snapshot -
nobody tried the latest snapshot?
-
Just to close this one up, tried several snapshots and it was all the same, nothing registered under states details under Floating, WAN or LAN rules.
Floating rules didn't seem to work at all but WAN and LAN did.
Long story short changed to 2.5.1-RC snapshots and everything works. -
@bobbenheim I have the same issue, tried moving my Download/Upload limiters from floating to WAN with no difference. I just saw your post.
-
@aivxtla For me the problem started when the IPv6 gateway fix was released about 15 days ago. Seemed like i was the only one with the problem so i changed to 2.5.1 where floating rules works.
Are you seeing the exact same issues where nothing is registered in state details and floating rules doesn't work, but WAN and LAN rules are fine? -
@bobbenheim on 2.6 there was no traffic going through my limiter rules for IPv4/6 on floating or even upon moving the rules to the WAN Rules tab, this was on a fresh install on 3/31. I switched to 2.5.1-RC1 yesterday after seeing your post and my limiters work fine now.