SG-2100 DMZ for home cloud
-
The end of the doc I posted above mentions "You should also enable DHCP if necessary, by going to Services > DHCP Server > OPT1 (for the example above)." If you didn't do that you'll need to set a static IP on the web sever.
re: untrusted domain, is that what shows in your browser when you connect to the web server? If you're using HTTPS you'll either need a certificate matching the hostname you're using to connect to it, or you'll need to ignore the certificate warning. That's not a pfSense issue.
-
@steveits I got it working on lan. Now I'll have to figure out wan so I can Isolate the server via vlan switch
-
@SteveITS After isolating the vlan on the switch, I had to configure a static IP, and now must configure for the WAN access. Would you know anything about this?