DNS randomly stops working
-
@sashli said in DNS randomly stops working:
@juniper just found this ticket in redmine, not sure if this can be an issue created by this gatewax problem
That's a special case, using IP's like 169.254.0.0/16.
There is a small patch for this - jimp posted one yesterday.I've updated my pfSense at home (Hyper-V = VM) based : it's just perfect.
I've just updated my work pfSense, they update went just fine. Again perfect.127.0.0.1 isn't even an external driver related, as it is part of the build in 'kernel' IP stack facilities.
Use another VM host - if you have a Windows 10 Pro somewhere, you could make one right away, or install pfSense bare bone and you see that their is - can not be - localhost issues, as it will break everything.
Just to be sure : your issue exists after you reset to default - and you only changed the password (!! did NOT import your settings !!) ?
-
Problem appear if i insert 127.0.0.1 on GENERAL SETUP---DNS Server Settings
I use to have there 127.0.0.1 if pfsense is a dns resolver.
If i config with 127.0.0.1 GENERAL SETUP---DNS Server Settings as a default pfsense dns server there is the problem with interface lo0.
-
@juniper Then you create a loopback??
If nothing is in General setup then it uses localhost.
-
@cool_corona no i use 127.0.0.1 as dns resolver for pfsense.
-
-
@cool_corona yes it works!
Problem appear if i use 127.0.0.1 in general setup.
If i set an external dns and set dns resolution behavior as you suggest all working fine.
Thank you.
-
@juniper exactly its a problem when 127.0.0.1 is listed in the general setup of the DNS server list.
-
Why do you want to add 127.0.0.1 here :
?
As you can see, I have nothing.
Because that's default : nothing.Still, the magic is happening :
I hope (didn't test) that pfSense is intelligent enough that, when 127.0.0.1 is added here :
It will ignore that 'request' as 127.0.0.1 is already there.
Here it is :
/etc/resolv.conf .......nameserver 127.0.0.1 search your-domain.tldOk, I broke my won rules
and added some DNS settings myself.
but /etc/resolv.conf didn't change.
I'm missing something ....But pfSense (unbound) works.edit : this is a no go :
[2.5.1-RELEASE][admin@pfsense.my-domain.tld]/root: dig @127.0.0.1 google.com
net.c:536: probing sendmsg() with IP_TOS=b8 failed: Can't assign requested address
net.c:536: probing sendmsg() with IPV6_TCLASS=b8 failed: No route to hostOk. Great.
Who calls Houston ?Solution : remove ::1 and 127.0.0.1 from the General settings as it was
Useless (before)
Break things (today).So, please : don't do that ;)
edit : even why I removed ::1 and 127.0.0.1 I had could not use "127.0.0.1" any more.
It was :
net.c:536: probing sendmsg() with IP_TOS=b8 failed: Can't assign requested addressall the time now.
Si, guys,I don't quiet understand what I'm seeing, but I see what you see.
Unbound wasn't listening to 127.0.0.1 any more - I restarted unbound : didn't help. I had to restart "127.0.0.1" - if possible.
I had to reboot pfSense - as this is a way to 'restart' the kernel. -
@gertjan Personally had 127.0.0.1 from before that "DNS Resolution Behavior" section existed, a couple of years at least.
If memory serves right
Guess that's because we wanted to ensure the system used its own resolver, and that only.Was stunned when all DNS resolution stopped after upgrading to 2.5.1. Not even pkg worked :)
But some dig(ging) lead to the entry removal, then restoration of DNS service.No bug listed as of now that I can find, but @jimp could we have this case covered in the pfsense-upgrade script that gets updated when pressing "13" in the CLI? It would eliminate the 127.0.0.1 entry, as workaround for now in place of debugging the lovely
net.c:536: probing sendmsg() with IP_TOS=b8 failed: Can't assign requested addressbork message.
-
I am also having this problem after upgrading directory from 2.4.5 CE to 2.5.1 on a Sophos SG-210.
In my case, enabling unbound on the Service Watchdog list restarts the service, but then the CPU is pegged at 100% and resolution still doesn't happen. Restarting the firewall works. I have not yet checked the PID or socket status during an outage, but I suspect unbound crashes, thinks its still running but can't clean itself up.One thing I noticed on my system is pkg info unbound says Python is enabled, even though it is disabled in the configuration. I manually restarted after toggling Python on and off. Is this even relevant?
[2.5.1-RELEASE][admin@myfirewallnotyours]/root: pkg info unbound unbound-1.13.1 Name : unbound Version : 1.13.1 Installed on : Thu Apr 15 03:10:26 2021 CDT Origin : dns/unbound Architecture : FreeBSD:12:amd64 Prefix : /usr/local Categories : dns Licenses : BSD3CLAUSE Maintainer : jaap@NLnetLabs.nl WWW : https://www.nlnetlabs.nl/projects/unbound Comment : Validating, recursive, and caching DNS resolver Options : DNSCRYPT : off DNSTAP : off DOCS : off DOH : on ECDSA : on EVAPI : off FILTER_AAAA : off GOST : on HIREDIS : off LIBEVENT : on MUNIN_PLUGIN : off PYTHON : on SUBNET : off TFOCL : off TFOSE : off THREADS : on Shared Libs required: libexpat.so.1 libnghttp2.so.14 libpython3.7m.so.1.0 libevent-2.1.so.7 Shared Libs provided: libunbound.so.8 Annotations : FreeBSD_version: 1202504 cpe : cpe:2.3:a:nlnetlabs:unbound:1.13.1:::::freebsd12:x64 repo_type : binary repository : pfSense Flat size : 7.79MiBTried all recommendations on this post but nothing is working so far.
-
Eagerly following any threads about DNS, My watch dog is restarting Unbound all the time.
2.5.1-RELEASE (amd64)
pfBlockerNG-devel: 3.0.0_16
snort: 4.1.3_5
Telegraf: 0.9_5Just wanted to share what see just on the off chance it helps the group, I did notice the already in use error in my system logs, when the watch dog is trying to start it back up
Apr 23 10:15:04 pfsense php[92161]: servicewatchdog_cron.php: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1619136904] unbound[68018:0] debug: creating udp4 socket 192.168.1.1 53 [1619136904] unbound[68018:0] error: bind: address already in use [1619136904] unbound[68018:0] fatal error: could not open ports' Apr 23 10:15:04 pfsense php[73303]: notify_monitor.php: Message sent to XXXXX@hotmail.com OK Apr 23 10:15:01 pfsense php[92161]: servicewatchdog_cron.php: Service Watchdog detected service unbound stopped. Restarting unbound (DNS Resolver)Brisbane Queensland Australia
-
Hi, so this is a documented upstream bug.
https://redmine.pfsense.org/issues/11316
I just found out about it because I submitted a trouble ticket.
Unfortunately, until this regression is fixed, the solution is either- Turn of Register "DHCP leases in DNS"
- Downgrade to 2.4.5
- Downgrade the package
- use the DNS forwarder
Unfortunately 1) and 4) don't help if you need to Register DHCP in DNS in your organization.
So here's hoping the developers on unbound have an easy fix.
-
Service watchdog and unbound don't play well together.
Especially if pfblockerng is also used (since it does take time to come up)
In various situations, it ends up in unbound restart loops.By enabling unbound python mode, and disabling dhcp integration, unbound is stable.
However, if wan ip changes due to pppoe restarting, unbound will die.
Always.
And since service watchdog is a no go for unbound, it has to be restarted manually
Yikes!.
At the time of ppp restart I get this
Apr 19 11:18:24 unbound 19913 [19913:0] info: service stopped (unbound 1.13.1).
2.5.1 pfblockerngng 3.0.16 -
I'm using unbound & service watchdog , and have no isues.
Not using pfblocker though. -
@netblues said in DNS randomly stops working:
However, if wan ip changes due to pppoe restarting, unbound will die.
Always.Hmm that interesting, for me I have noticed when watchdog finds unbound is broken I also see logs saying my Nord VPN got a new IP.. the core WAN (ppoe) is up but one of the VPNs out drop or looses some packets around the same time
-
I notice on my 2.5.1 box (I upgraded from 2.4.5 tonight) that after a reboot, if I check unbound, it's only listening on LOCALHOST and not my LAN interface (I have it set to only listen on LAN and LOCALHOST). After a manual restart, it's then listening properly. I've disabled register DHCP leases in DNS for now, and that still doesn't help on a reboot. If my server get's rebooted, my LAN is dead in the water until I can login and restart unbound.
-
@netblues said in DNS randomly stops working:
Service watchdog and unbound don't play well together.
Example good example :
@jasonau said in DNS randomly stops working:
Apr 23 10:15:04 pfsense php[92161]: servicewatchdog_cron.php: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1619136904] unbound[68018:0] debug: creating udp4 socket 192.168.1.1 53 [1619136904] unbound[68018:0] error: bind: address already in use [1619136904] unbound[68018:0] fatal error: could not open ports' Apr 23 10:15:04 pfsense php[73303]: notify_monitor.php: Message sent to XXXXX@hotmail.com OK Apr 23 10:15:01 pfsense php[92161]: servicewatchdog_cron.php: Service Watchdog detected service unbound stopped. Restarting unbound (DNS Resolver)This is probably a perfect example where the Service watchdog cron pfSense package makes the issues worse.
It is 'normal' that the DNS unbound / the resolver is restarted as that this option exactly instructs that to happen :
So, it received a restart (a DHCP lease came in) : it stop, and start again : this can be seen in the logs !
The service watchdog sees the process unbound stopping (and doesn't know the difference between dying and stopping) and tries to start an instance of unbound.
But it was already in a restart phase : the instance that was running in the past is just restarting.. Now TWO instances of unbound are trying to compete for a start-up.
The first one - the one that was already running in the past) binds to the port 53 again on all selected interfaces, and the second, started by the service watchdog,sees this ports already in use, and complains. The error log message is now perfectly explained. We can see that there are two unbound processes here : 92161 and 73303 - and the second one logs an error and stops.People : please, for your own sake : do not make the issue worse.
Unbound can be a light weight process, your device has nothing else to do as starting and stopping processes. But then pfBlockerNG came along, and it could put a "huge block of concrete" around the feeds of unbound. Now, unbound has some difficulties to start 'fast' as it needs to parse thousands of (DNSBL) lines first.
Or : you have thousands of devices on your network and they - as usual, all use DHCP to obtain an IP (lease).
Or : what's also very known now : networks contains device that are very low budget (the gadgets). The use bad behaving code, like DHCP clients that ask a new kease every xx seconds (see the DHCP logs to track them down) : so unbound restarts every xx seconds. So, locate these device and waste bin these devices or better : don't use them, don't buy them.The Service watchdog cron pfSense can be useful if you have a dying system, and you decided not to invest any time and money into it any more, as it will get replaced asap.
You put a " Service watchdog cron pfSense" on it, an let it start to dig its own hole.Btw : the person who wrote the Service watchdog (jimp from Netgate) said himself on this forum : Do not use this package - I'm not using it myself. The usage case is very, very rare and only the ones that know how to deal with it should use it.
This excludes 99,99 % of all of us on the forum.Servers, and other 'always on' devices that are designed to on for days, month or even years do not need such a restart service. Very known programs like bind9, nginx, postfix and also unbound can run for thousands of hours.
IF you can see messages in the logs - the system log and unbound log, where you can see that unbound stops or even "segment faults" or it makes the kernel "dump" - and not starting any more, then, and only then, you could consider using the service watchdog. But in this case, I would take the time to see if this happens often, and if so, going back to the previous version of pfSense.
I did not saw unbound die on me EVER. I do use the amd64 'intel' version.
I know there was an 'arm' compiler issue recently, that could produce a faulty executable. As discussed on the forum. -
Clearly, unbound isn't a candidate for service watchdog.
When it restarts, if its fast, one might get away with this. If its not, hell breaks loose.Unbound without pfblockerng doesn't SEEM to crash, however stressing a program, does reveal issues.
-
@gertjan said in DNS randomly stops working:
This is probably a perfect example where the Service watchdog cron pfSense package makes the issues worse.
It is 'normal' that the DNS unbound / the resolver is restarted as that this option exactly instructs that to happen :So, it received a restart (a DHCP lease came in) : it stop, and start again : this can be seen in the logs !
Thanks for the reply, I'm going to disable my watchdog 'however' the box to register DNS is not checked on any of my ranges (LAN/Wifi) so (AFAIK) pfsense should not be restarting as dhcp leases come in ? without the watchdog I still notice drops in DNS responding Chrome will say unable to resolve then moments later the page loads
-
@jasonau said in DNS randomly stops working:
pfsense should not be restarting as dhcp leases come in ?
"pfSense" is just the name of the box - an OS (FreeBSD) and some processes or programs.
It's known that the DHCP Registration restart the DNS, if you want it to do so.
If this option is checked, a process called "dhcpleases" is created that verifies the list with known leases, as the DHCP server maintains such a list. You can see it here : Status> DHCP Leases
As soon as this list changes, because a lease is renewed, the dhcpleases detects this, writes out the leases list to the system's /etc/hosts file, and restart unbound.
That ONE reason why unbound could get restarted regularly, or even very often.Their are other process or events that restart unbound.
Like : an interface goes down and up (take out the LAN cable, put it back in again) and have a look at the sustem logs, and other logs : A LOT happened. Many process can get restarted. because a 'major' system event arrived.Or, also popular : people use pfBlockerNG and ask feeds to update every xx minutes (totally nuts, I know, but hey, there are people out their who do so because the "can do so". An don't understand that their might be consequences.
It all boils down to : check the logs. Learn how to read them. Check why unbound get restarted : what event triggered the restart.
Now, you can ask yourself : can I influence this event. Do I need it ? Can I change it ?I know, this is more basic administration system management, and isn't really related to 'simple' firewall/router management.
But hey, if yo want a simple system, go for that DLINK 20$ router box, or better : go for that Netgear thing.
pfSense doesn't have the same price tag for sure - and is on many fronts a quasi industrial product.
It needs some work, and understanding. we all have to fckg learn things again - and stay on it.
