Manual Update button broken?

chpalmer

Iv noticed that the button for Manuel Update is not going anywhare, when i press it like used to it just hang. Have been since pfSense-Full-Update-1.2.3-20090704-0349 build.

"Enable Firmware Update" button.

Same here, click then nothing. Just hangs.

Im doing an automatic update right now…

jimp

This should be fixed now, or at least in the next available snapshot after this post. A fix went into the repo a while ago, but you may have to use auto-update to grab it, or do a console upgrade.

DeCex

still hang with: pfSense-Full-Update-1.2.3-20090705-2031
: pfSense-Full-Update-1.2.3-20090706-1212

file, lets wait for next build :)

strafelife

Issue still exists with pfSense-1.2.3-20090707-1317.

Darkk

I was wondering about this too since I thought I fubered the firmware update from the latest snapshot this morning. I am going to do a manual update via the console tonight. Let me know when the next snapshot fixes it.

Thanks.

Darkk

Well, I tried doing the update via console with no avail… any ideas?

Fatal error: Call to undefined function: mark_subsystem_dirty() in /etc/rc.initial.firmware_update on line 47

jimp

There were some more commits that went in tonight that might fix this.

Darkk

The auto-update didn't work for me. Is there a way to fix /etc/rc.initial.firmware_update file so it can get the manual updates?

chpalmer

latest /pfSense-Full-Update-1.2.3-20090708-1827.tgz came up with a fatal error. I had to start over from iso. I didnt write down the errror- sorry!

chpalmer

Regarding the broken update… http://forum.pfsense.org/index.php/topic,17573.0.html

strafelife

Seems to be fixed, with pfSense-1.2.3-20090710-1120

Darkk

Glad to know the latest snapshot fixes it.

However, how do we fix our broken updates? I tried manual update via the console and it gives me this error:

Fatal error: Call to undefined function: mark_subsystem_dirty() in /etc/rc.initial.firmware_update on line 47

I really hate the thought of complete reinstall via a ISO CD as I like to keep the traffic logs and stuff.

jimp

@Darkk:

Glad to know the latest snapshot fixes it.

However, how do we fix our broken updates? I tried manual update via the console and it gives me this error:

Fatal error: Call to undefined function: mark_subsystem_dirty() in /etc/rc.initial.firmware_update on line 47

You can copy a "good" /etc/rc.initial.firmware_update from a working system, CD, etc on top of that file on a broken system. There are any number of ways to do this (scp, edit file in the gui and copy/paste, etc)

gladizxx

You can copy a "good" /etc/rc.initial.firmware_update from a working system, CD, etc on top of that file on a broken system. There are any number of ways to do this (scp, edit file in the gui and copy/paste, etc)

Still have not run … :)

mentalhemroids

I'm having problems even with the newest updates. I'm going back to the stable ones for now.
Looks like the snapshots site is down for 1.2.3 anyways.

fastcon68

I just installed XenServer 5.5.0 and I am running snapshots. I was able to recover for a failure in just about 10 seconds. I converted a snapshot to a template it's running great. I can create a snap prior to doing a update and can recover very quicky if it blows up.

RC

gladizxx

@DeCex:

Iv noticed that the button for Manuel Update is not going anywhare, when i press it like used to it just hang. Have been since pfSense-Full-Update-1.2.3-20090704-0349 build.

Solutions Manual update: edit the file / etc / rc.firmware. (copy the file ..

#!/bin/sh

$Id: rc.firmware,v 1.64.2.25.2.1 2008/07/12 12:19:50 ermal Exp $

/etc/rc.firmware

part of m0n0wall (http://neon1.net/m0n0wall)

Copyright (C) 2003 Manuel Kasper mk@neon1.net.

All rights reserved.

#CFDEVICE=cat /var/etc/cfdevice

exec 3>&2 2>>/tmp/firmware_update.log

export ACTION=$1
export IMG=$2
if [ $# -eq 3 ]; then
export CUSTOMIMG=$3
fi

if [ $ACTION != "upgrade" ]; then
/sbin/umount -f /ftmp > /dev/null 2>&1
fi

backup_chflags() {
TOPROCESS="bin lib libexec sbin usr"
for files in $TOPROCESS; do
/usr/sbin/mtree -Pcp /${files} | bzip2 -9 > /tmp/chflags.dist.${files}.bz2 | logger -p daemon.info -i -t UpgradeFlags
done
}

restore_chflags() {
TOPROCESS="bin lib libexec sbin usr"
for files in $TOPROCESS; do
cd / && /usr/bin/bzcat /tmp/chflags.dist.${files}.bz2 | /usr/sbin/mtree -PU -p /${files} | logger -p daemon.info -i -t UpgradeFlags
done
}

remove_chflags() {
TOPROCESS="bin lib libexec sbin usr"
for files in $TOPROCESS; do
/bin/chflags -R noschg /${files}
/bin/chmod -R u+rw /${files}
done
}

binary_update() {
TGZ=$1
ERR_F="/tmp/bdiff.log"
rm ${ERR_F} 2>/dev/null
/bin/mkdir /tmp/patched /tmp/patches 2>>${ERR_F}
backup_chflags
remove_chflags
cd /tmp/patches
for i in /usr/bin/tar tvzf $TGZ | egrep -v "(^d|_md5)" | nawk '{print $9;}';
do
FILE=basename ${i}
echo "Working on ${i}"
# Untar patch file and md5 files
/usr/bin/tar xzf ${TGZ} ${i} ${i}.old_file_md5 ${i}.new_patch_md5 ${i}.new_file_md5 2>>${ERR_F}

# Apply patch - oldfile newfile patchfile
/usr/local/bin/bspatch /${i} /tmp/patched/${FILE} /tmp/patches/${i} 2>>${ERR_F}

OLD_FILE_MD5=cat /tmp/patches/${i}.old_file_md5 2>/dev/null
NEW_PATCH_MD5=cat /tmp/patches/${i}.new_patch_md5 2>/dev/null
NEW_FILE_MD5=cat /tmp/patches/${i}.new_file_md5 2>/dev/null
PATCHED_MD5=/sbin/md5 -q /tmp/patched/${FILE} 2>/dev/null

if [ "$PATCHED_MD5" = "$NEW_PATCH_MD5" ]; then
/usr/bin/install -S /tmp/patched/${FILE} /${i}
else
#echo "${i} file does not match intended final md5."
echo "${i} file does not match intended final md5." >> ${ERR_F}
fi

/bin/rm /tmp/patched/${FILE} >> ${ERR_F}
/bin/rm /tmp/patches/${i} >> ${ERR_F}
/bin/rm /tmp/patches/${i}.* >> ${ERR_F}
done
/bin/rm -rf /tmp/patched /tmp/patches >> ${ERR_F}
restore_chflags
}

case $ACTION in
enable)
#/sbin/mount_mfs -s 15360 -T qp120at -b 8192 -f 1024 dummy /ftmp \

> /dev/null 2>&1

;;
auto)
backup_chflags
remove_chflags
/etc/rc.firmware_auto
restore_chflags
;;
upgrade)

wait 5 seconds before beginning

sleep 5
backup_chflags
remove_chflags

Do we have a pre-upgrade hook in the update file?

if [ tar tvzf $IMG | grep /tmp/pre_upgrade_command | wc -l -gt 0 ]; then
tar xzvf $IMG -C / ./tmp/pre_upgrade_command
chmod a+rx /tmp/pre_upgrade_command
sh /tmp/pre_upgrade_command
fi

#exec /dev/console 2>/dev/console

echo
echo "Firmware upgrade in progress…" | logger -p daemon.info -i -t Upgrade
echo "Firmware upgrade in progress..." | wall

backup config

mkdir /tmp/configbak
cp -p /conf/* /tmp/configbak

unmount /cf

/sbin/umount -f /cf

dd image onto card

if [ -r $IMG ]; then
/usr/bin/gunzip -S "" -c $IMG | dd of=/dev/r$CFDEVICE bs=16k > /dev/null 2>&1
echo "Image installed."
fi

mount /cf

/sbin/mount -w -o noatime /cf

restore config

cp -p /tmp/configbak/* /conf

restore_chflags

rm -f /var/run/firmware.lock

/bin/sync
sleep 5

echo "Done."

If /tmp/post_upgrade_command exists after update

then execute the command.

if [ -f /tmp/post_upgrade_command ]; then
sh /tmp/post_upgrade_command
fi

If the archive has unpacked a file called

/tmp/no_upgrade_reboot_required then do

not reboot after upgrade.

if [ -f /tmp/no_upgrade_reboot_required ]; then
rm /tmp/no_upgrade_reboot_required
else
rm -f /var/run/config.lock
sh /etc/rc.reboot
fi
;;
pfSenseupgrade)

wait 5 seconds before beginning

sleep 5

Sanity check - bail early if there's no firmware file!

if [ ! -r $IMG ]; then
echo "2nd parameter has not been passed or file does not exist. Exiting." | logger -p daemon.info -i -t Upgrade
exit
fi

backup_chflags
remove_chflags

#exec /dev/console 2>/dev/console

echo "Firmware upgrade in progress…" | logger -p daemon.info -i -t Upgrade

backup config

/bin/mkdir -p /tmp/configbak
cp -p /conf/* /tmp/configbak 2>/dev/null

mount /cf

/etc/rc.conf_mount_rw
/sbin/mount -w -o noatime /cf 2>/dev/null
/sbin/mount -w -o noatime / 2>/dev/null

tar explode image onto hd

echo "Installing $IMG." | logger -p daemon.info -i -t Upgrade
cd / && /usr/bin/tar xzUPf $IMG | logger -p daemon.info -i -t Upgrade
/usr/bin/find / -name CVS -exec rm -fr {} ;
echo "Image installed $IMG." | logger -p daemon.info -i -t Upgrade

# process custom image if its passed
if [ $# -eq 3 ]; then
if [ -f $CUSTOMIMG ]; then
echo "Custom image $CUSTOMIMG found." | logger -p daemon.info -i -t Upgrade
echo "Custom image ($CUSTOMIMG) found."
PWD_DIR=pwd
cd / && /usr/bin/tar xzPUf $CUSTOMIMG | logger -p daemon.info -i -t Upgrade
cd $PWD_DIR
echo "Custom image $CUSTOMIMG installed." | logger -p daemon.info -i -t Upgrade
fi
fi

restore config

cp -p /tmp/configbak/* /conf 2>/dev/null

restore /etc symlinks

rm /etc/hosts
ln -s /var/etc/hosts /etc/hosts

restore_chflags

Remove upgrade file

rm -f $IMG

rm -f /var/run/firmware.lock

/bin/sync
sleep 5

remount /cf ro

rm -rf /etc/rc.conf
rm -rf /etc/motd
find / -name CVS -type d -exec rm {} ;
rm -rf /usr/savecore/*
/etc/rc.conf_mount_ro
/sbin/umount -f /cf 2>/dev/null
/sbin/mount -r /cf 2>/dev/null
/sbin/umount -f / 2>/dev/null
/sbin/mount -r / 2>/dev/null
if [ -e /etc/init_bootloader.sh ]; then
sh /etc/init_bootloader.sh
fi
/bin/sync
echo "Done." | logger -p daemon.info -i -t Upgrade

If /tmp/post_upgrade_command exists after update

then execute the command.

if [ -f /tmp/post_upgrade_command ]; then
sh /tmp/post_upgrade_command
fi

If the archive has unpacked a file called

/tmp/no_upgrade_reboot_required then do

not reboot after upgrade.

if [ -f /tmp/no_upgrade_reboot_required ]; then
rm /tmp/no_upgrade_reboot_required
else
rm -f /var/run/config.lock
sh /etc/rc.reboot
fi
;;
delta_update)
backup_chflags
remove_chflags
binary_update $IMG
restore_chflags
rm -rf /etc/rc.conf
rm -rf /etc/motd
find / -name CVS -type d -exec rm {} ;
rm -rf /usr/savecore/*
/etc/rc.conf_mount_ro
/sbin/umount -f /cf 2>/dev/null
/sbin/mount -r /cf 2>/dev/null
/sbin/umount -f / 2>/dev/null
/sbin/mount -r / 2>/dev/null
if [ -e /etc/init_bootloader.sh ]; then
sh /etc/init_bootloader.sh
fi

;;
esac

Then open Edit / etc / rc.initial.firmware_update .. (copy and paste the file …

#!/usr/local/bin/php -f

$g['booting'] = true;
require("globals.inc");

echo "Starting the {$g['product_name']} console firmware update system";

require("functions.inc");
echo ".";
require("config.inc");
echo ".";
$g['booting'] = false;

$d_fwupenabled_path = $g['varrun_path'] . "/fwup.enabled";

$fp = fopen('php://stdin', 'r');

echo ".\n\n";

$shell_active = true;

echo "1) Update from a URL\n";
echo "2) Update from a local file\n";
echo "Q) Quit\n";

echo "\nPlease select an option to continue: ";

$command = strtoupper(chop(fgets($fp)));

switch ($command) {
case "q":
case "quit":
echo "\n";
fclose($fp);
die;
break;
case "1":
echo "\nEnter the URL to the .tgz update file:\n> ";
$url = chop(fgets($fp));
if(!$url) {
fclose($fp);
die;
}
$status = does_url_exist($url);
if($status) {
conf_mount_rw();
touch($d_fwupenabled_path);
if(file_exists("/root/firmware.tgz"))
unlink("/root/firmware.tgz");
echo "\nFetching file size…\n";
$file_size = exec("fetch -s "$url"");
$file_size = trim($file_size, "\r");
echo "\nFile size: $file_size\n";
echo "\nFetching file...\n";
exec("fetch -1 -w15 -a -v -o /root/firmware.tgz "$url"");
if($file_size <> filesize("/root/firmware.tgz")) {
echo "\nFile size mismatch. Upgrade cancelled.\n\n";
fclose($fp);
die;
}
if(!file_exists("/root/firmware.tgz")) {
echo "Something went wrong during file transfer. Exiting.\n\n";
fclose($fp);
die;
}
$status = does_url_exist("$url.md5");
if($status) {
echo "\nFetching MD5...\n";
exec("fetch -1 -w15 -a -v -o /root/firmware.tgz.md5 "$url.md5"");
} else {
echo "\n\nWARNING.\n";
echo "\nCould not locate a MD5 file. We cannot verify the download once its done.\n\n";
sleep(15);
}
if(file_exists("/root/firmware.tgz.md5")) {
$source_md5 = trim(cat /root/firmware.tgz.md5 | awk '{ print \$4 }',"\r");
$file_md5 = trim(md5 /root/firmware.tgz | awk '{ print \$4 }',"\r");
echo "URL MD5: $source_md5\n";
echo "Downloaded file MD5: $file_md5\n";
if($source_md5 <> $file_md5) {
echo "\n\nMD5 checksum does not match. Cancelling upgrade.\n\n";
exec("rm -f /root/.md5");
fclose($fp);
die -1;
}
echo "\nMD5 checksum matches.\n";
exec("rm -f /root/.md5");
}
if(stristr($url,"bdiff"))
$type = "bdiff";
if(file_exists("/root/firmware.tgz"))
do_upgrade("/root/firmware.tgz", $type);
} else {
echo "\nCould not download update.\n\n";
fclose($fp);
die -1;
}
case "2":
echo "\nEnter the complete path to the .tgz update file: ";
$path = chop(fgets($fp));
if(!$path) {
fclose($fp);
die;
}
if(stristr($fp,"bdiff"))
$type = "bdiff";
if(file_exists($path)) {
touch($d_fwupenabled_path);
do_upgrade($path, $type);
} else {
echo "\nCould not find file.\n\n";
fclose($fp);
die -1;
}
}

function do_upgrade($path, $type) {
global $fp;
check_for_kernel_file();
echo "\nOne moment please… Invoking firmware upgrade...\n";
if($type == "bdiff")
exec("/etc/rc.firmware delta_update $path");
else
exec("/etc/rc.firmware pfSenseupgrade $path");
unlink_if_exists($path);
die;
}

exec("rm -f /root/*.md5");
fclose($fp);

?>

Pfsense can now update to the latest version …. ::)/mk@neon1.net

Darkk

Bah!! Wish I seen this before I wiped the hard drive with a fresh install. Ah well

Nice catch tho.