Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Configuring a 3rd ISP WAN Interface to another LAN Interface.

    Scheduled Pinned Locked Moved Firewalling
    6 Posts 2 Posters 1.1k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A Offline
      amk
      last edited by

      Hi,
      I need some help on configuring a 3rd ISP WAN Interface to another LAN Interface.

      Current setup I got running is Multi Wan with Failover.
      ISP A Public IP - 200.55.5.1
      ISP B Public IP - 6.96.6.11
      LAN IP - 192.168.1.1

      What I added and configured
      ISP C Public IP - 197.200.1.1
      LAN 2 IP - 10.10.10.1 DHCP
      DNS Server IP - 8.8.8.8

      I can’t seem to get the Internet working from ISP C to LAN 2, Lost at the firewall rules or something else I'm missing out on.

      Thank you.

      V 1 Reply Last reply Reply Quote 0
      • V Offline
        viragomann @amk
        last edited by

        @amk
        So you want the LAN2 to get out to ISP C, correct?

        Check if pfSense has added an outbound NAT rule for LAN2 and the WAN C interfaces automatically.If not you have to add one by yourself.

        For directing out internet traffic from LAN 2 to WAN C you have to set up policy routing rules on LAN 2.
        To only affect public destinations add an alias first and add all RFC 1918 networks to it. Then modify your LAN 2 firewall rules which allow outbound traffic and check invert at destination and enter the RFC 1918 alias, expand the advanced options and select the WAN C gateway.

        Consider that the policy routing rules direct all allowed packets to the WAN C gateway, so you will need additional rules on LAN 2 for internal access. E.g. if you use pfSense for DNS resolution, you have to add a rule for TCP/UDP, destination "This firewall" port 53.

        A 1 Reply Last reply Reply Quote 1
        • A Offline
          amk @viragomann
          last edited by

          @viragomann
          Thanks for helping out.

          Yes Correct LAN2 to get out to ISP C. The Outbound NAT rule was automatically created.

          Would it be possible if you could get in details how to create the alias and the Lan rules. I tried and did not work.

          Thanks.

          V 1 Reply Last reply Reply Quote 0
          • V Offline
            viragomann @amk
            last edited by

            @amk
            Firewall > Aliases > IP > Add
            Enter a name, e.g. "RFC1918", select Network(s) from Type drop-down and add the concerned networks to it.

            The following screen shows the content of my RFC1918 alias and how I use it in the firewall rule.
            2af5e981-05b1-4f8a-8ba5-0714262fe4d7-image.png
            In your case you have to select the WAN C gateway additionally in advanced options.

            A 1 Reply Last reply Reply Quote 1
            • A Offline
              amk @viragomann
              last edited by

              @viragomann

              Thank you so much!

              I struggled and finally thought of rebooting the box and it worked, I think that was the issue before as well I should have tried a reboot.

              V 1 Reply Last reply Reply Quote 0
              • V Offline
                viragomann @amk
                last edited by

                @amk
                Glad that you get it working finally.

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.