canon pixma mf642cdw
-
@bbgarnett from the limited testing I have done with old tplink switch I had that would not allow you remove vlan 1 from any port.
There was a way to install the v3 firmware on my v2 hardware - and that seems to have corrected that problem.
Does your switch allow you to remove vlan 1 from ports you want to be in another vlan - if so should work..
-
@johnpoz no idea again I am noob to all this so still just learning things.
https://www.amazon.com/gp/product/B00K4DS5KU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Hardware version TL-SG108E 6.0
Firmware version 1.0.0 Build 20201208 Rel.40304
-
@bbgarnett that settings is all just vlan 1, its pretty much in dumb switch mode.. You have no vlans setup on that switch at all..
In such a mode there should be no issues with that switch..
I thought you were running fine after you turned off guest mode.
To test if your switch can do vlans "correctly" you would need to create a vlan and put a port in that vlan, and be able to remove vlan 1.
-
@johnpoz yes I am running fine with guest mode off. Also I haven't done anything yet with vlans just thought it was recommended to run IOT devices on a vlan since those devices tend to be more insecure. Again still learning everything and as of right now everything is working.
-
@bbgarnett yeah it prob better to isolate devices you do not trust in a vlan isolated from the devices you do trust, etc.
-
https://forum.netgate.com/topic/183787/s0lved-squidguard-and-wireless-printer
Maybe add a DNS resolver for it also??
