pfSense compile requirements for 3rd party software

[encrypt1d]

@jimp @bmeeks

Thanks.
Really just looking for something that speeds up GUI browsing on FreeBSD, not a full IDE. Tracing function calls is much easier that way.
I was a developer for the first 10 years of my career, and miss those tools (C on VXWorks with a proprietary IDE, then moved on to C++/Visual Studio, Java/Eclipse etc). They were multimillion line code repos, so grep just didn't cut it. I googled around bit, but it gets religious fast.

[bmeeks]

One other thing I forgot to mention about the incremental building during development/troubleshooting is that I found it easier to do my initial work totally within the /usr/ports/* tree and leave the Poudriere tree alone at first. This way I can run a quick make in the /usr/ports/* directory to check for stupid C syntax errors or other coding oversights I may generate with my changes. You get immediate feedback of errors there via the console.

When you run the ./build.sh script to fire off the build within the package builder, any compilation errors are buried in a corresponding log file down in the /usr/local/poudriere/ tree. You can find the log, but it's a bit of effort.

So I do my initial compile in the regular /usr/ports/ tree to make sure my code compiles successfully. Then, if it does, I will copy my patch diff over to the Poudriere tree and kick off the package builder so I get a package I can copy over to pfSense and actually execute.

[encrypt1d]

As promised, below is a full summary of everything I needed to do to get pfSense FreeBSD port builds working in an unofficial non-Netgate environment.

Why? My motivation was simple, and that was to develop a code fix to an issue within a package that pfSense uses, and has been broken since 2.4.5 for some configurations.

Note - only Netgate may produce official builds with the pfSense product ID. These steps are for debugging and exploratory purposes only.

Steps:

1. Build a VM and install FreeBSD
2. Install package dependencies
3. Clone the git repos
4. Edit the build.conf
5. Edit the builder_common.sh
6. Run the build setup
7. Prepare the Poudriere environment
8. Build ports
9. Change code and build new package versions

Step 1) Build a VM

• Use your favorite virtualization software to create a FreeBSD compatible VM with as many cores and as much RAM as you can throw at it. I used 4 CPUs, and 24 GB (eventually). My initial VM had 8GB which was insufficient.

• Download the FreeBSD ISO corresponding to your pfSense revision, in this case 2.5.2 is build on FreeBSD 12.2 STABLE.

• Boot the VM with the FreeBSD ISO you downloaded, and be sure to use ZFS for the filesystem! I selected to include the Ports Tree and the System Source Tree in my install. You cannot create a jail on a non-ZFS filesystem.

Step 2) Install package dependencies
You will need these packages to get started.
Running as root:

pkg install git
pkg install poudriere
pkg install rsync
pkg install screen
pkg install nginx

Step 3) Clone the git repos
Make a build folder, such as /build, change to it, and then start cloning.

mkdir /build
cd /build
cd /build;git clone https://github.com/pfsense/pfsense.git
cd /build/pfsense;git checkout RELENG_2_5_2
cd /build;git clone https://github.com/pfsense/FreeBSD-ports.git
cd /build/FreeBSD-ports;git checkout RELENG_2_5_2

You now have the following folders:

/build/pfsense
/build/FreeBSD-ports

4) Edit the build.conf
In the folder /build/pfsense:

cp build.conf.sample build.conf

Then edit the build.conf file and ensure you use the following options set:

export PRODUCT_NAME="pfSense"
export BUILD_AUTHORIZED_BY_NETGATE=yes
export FREEBSD_REPO_BASE=https://github.com/pfsense/FreeBSD-src.git
export FREEBSD_BRANCH="RELENG_2_5_2"
export PKG_REPO_SERVER_DEVEL="pkg+https://beta.pfsense.org/packages"
export PKG_REPO_SERVER_RELEASE="pkg+https://pkg.pfsense.org"
export PKG_REPO_SERVER_STAGING="pkg+https://pkg.pfsense.org"
export SKIP_FINAL_RSYNC=YES

5) Edit the builder_common.sh script
This file is in:

/build/pfsense/tools/builder_common.sh

You want to make 2 changes, the first is to comment out the following:

#       if [ "${PRODUCT_NAME}" = "pfSense" -a -n "${GNID_REPO_BASE}" ]; then
#               echo ">>> Obtaining gnid sources..."
#               ${BUILDER_SCRIPTS}/git_checkout.sh \
#                       -r ${GNID_REPO_BASE} \
#                       -d ${GNID_SRC_DIR} \
#                       -b ${GNID_BRANCH}
#       fi

Next comment out this line:

        #pkg install ${PRODUCT_NAME}-builder

6) Run the build setup

cd /build/pfsense
./build.sh --setup

If anything fails, you'll have to determine the reason. Assuming the previous instructions have been followed everything should be fine.

7) Prepare the Poudriere environment
Now the really long command. This creates the Poudriere jail environment for building the ports. This took 11 hours on a core i7-11800H with an NVME SSD. Unfortunately it does not update the screen with any progress info.

cd /build/pfsense
./build.sh --setup-poudriere

8) Build ports
We're now ready to try building the port tree, which failed on the first go due to missing package dependencies for me.

cd /build/pfsense
./build.sh --update-pkg-repo -a amd64.amd64

I was missing these packages, you might be missing others:

sysutils/vmdktool
emulators/qemu-user-static
archivers/gtar
textproc/xmlstarlet

They were not available in my repo for a simple "pkg install" command, so I compiled and installed them from the ports tree we cloned earlier:

cd /build/FreeBSD-ports/sysutils/vmdktool/;make package
pkg install /build/FreeBSD-ports/sysutils/vmdktool/work/pkg/vmdktool-1.4.pkg
cd /build/FreeBSD-ports/emulators/qemu-user-static/;make package
pkg install /build/FreeBSD-ports/emulators/qemu-user-static/work/pkg/qemu-user-static-3.1.0_12.pkg
cd /build/FreeBSD-ports/archivers/gtar; make package
pkg install /build/FreeBSD-ports/archivers/gtar/work/pkg/gtar-1.34.pkg
cd /build/FreeBSD-ports/textproc/xmlstarlet; make package
pkg install /build/FreeBSD-ports/textproc/xmlstarlet/work/pkg/xmlstarlet-1.6.1.pkg

After that, the build ran but a number failed due to missing dist files it wasn't able to fetch. You can see exactly what it is trying to fetch from the repos in the build logs (one for each package) it points you to in the output. Mine was missing the following files:

sqlite-src-3350500.zip
zabbix-5.2.6.tar.gz
mysql-boost-5.7.34.tar.gz
stunnel-5.59.tar.gz

I found them on the internet and placed them in:

/usr/ports/distfiles

After this, the build moved on. Then the "rust" package failed to build due to resource exhaustion (remember my original machine only had 8 GB RAM). I upped the VM RAM to 24 GB and then it passed. If you have less memory, keep trying - theoretically it should eventually finish.

Now the build ran to completion. It does fail on the signature step, but that's expected since we don't have the environment to sign the build (nor should we!).

9) Change code and build new package versions

Changing the code is a bit tricky, and one needs to be cautious on how it all works.

a) Extract the source
b) Copy it elsewhere and make your change
c) Copy it back
d) Make your patch
e) Copy your patch to the jail
f) Update your port revision to trigger a compile
g) Test your code on a pfSense non-production firewall

a) Extract the Source
We will assume our package name is "foo"

cd /build/FreeBSD-ports/foo
make clean
make extract

This places the source code in (the x's are a version number)

 /build/FreeBSD-ports/foo/work/foo-x.x/

b) Copy your code elsewhere
Find the source files you want to change and make 2 copies of each to somewhere outside of this folder (the "work" folder gets deleted each time you run "make clean" so you want to keep your changes safe and sound somewhere else).

cp source1.c /tmp/source1.c
cp source1.c /tmp/source1.c.orig
cp source1.c /tmp/source1.h
cp source1.c /tmp/source1.h.orig

The .orig files are needed for patching later (do not change them), and the .c/.h files are where you make your changes. This step is only done once for each new file you change.

c) After editing, copy these files back

cp /tmp/source1.c /build/FreeBSD-ports/foo/work/foo-x.x/
cp /tmp/source1.c.orig /build/FreeBSD-ports/foo/work/foo-x.x/
cp /tmp/source1.h /build/FreeBSD-ports/foo/work/foo-x.x/
cp /tmp/source1.h.orig /build/FreeBSD-ports/foo/work/foo-x.x/

d) Make the patch (or just do test compiles)

cd /build/FreeBSD-ports/foo/
make makepatch  #Creates the diff file
OR
make package #test compile

The makepatch command creates patch (diff) files (with names like patch-source1.c) in

/build/FreeBSD-ports/foo/files/

e) Copy the patches to the jail
Now in order to have the port build see the patch, copy them here. Your folder may be named differently depending on your release.

/usr/local/poudriere/ports/pfSense_v2_5_2/net/miniupnpd/files/

f) Edit the Makefile
Edit the Makefile for your port, for example:

vi /usr/local/poudriere/ports/pfSense_v2_5_2/foo/Makefile 

Change the port revision, and increase it by 1, for example:

PORTREVISION=2

g) Build your patched port
Run your build again, it should now create a new package for your patched code

cd /build/pfsense
./build.sh --update-pkg-repo -a amd64.amd64

If all went well, your package is in (or a similar folder):

/usr/local/poudriere/data/packages/pfSense_v2_5_2_amd64-pfSense_v2_5_2/All/

Copy it to your test firewall (best not to test in production right?)
From an ssh shell on the firewall, you can replace the package with:

pkg add -f foo.x.x.txz

If you need to revert to the original package from the distro:

pkg delete -f foo
pkg install foo

A note on building iterations of your package:
I found it was best to script the synchronization of the files I was changing, and the copying of the patch files, so I can start with a known baseline for every pass. The idea is this:

make clean
make extract
copy my changed and .orig files over the freshly extracted code
remove old patch files from poudriere jail folder and the working port folder
make makepatch
copy new patch files to poudriere jail folder
Uprev the Port revision
Build

And that's it. Thanks again to @bmeeks and @jimp for helping me with this.

[Marc05]

@encrypt1d

This is very handy to have, thank you very much!

[guiambros]

Just to say a heartfelt thank you to @encrypt1d @bmeeks @jimp for your efforts in documenting the process here. What an incredible arduous and cumbersome process, particularly for anyone who's not a core pfSense or package maintainer.

I too spent countless hours scratching my head trying to figure out why my manually-compiled miniupnpd wasn't working in prod (same IOCTL errors as @encrypt1d ), and eventually realized I'd have to build a pfSense dev environment in order to compile with the right libraries.

I finally found this thread, which helped me overcome the many twists and turns (including detours due to no ZFS, lack of disk space, recreating poudriere jails 4x, etc).

The thorniest issue for me (and in hindsight due to my own stupidity) was to ignore the "Jail is newer than host. (Jail: 1203500, Host: 1203000)". I thought it would be harmless -- c'mon, how different would 12.3.5 kernel be from 12.3.0? It turns out, they are indeed very different.

Once I upgraded the host to 12.4 (I didn't figure out how to upgrade to an intermediate 12.3.5 release), and cleaned / recreated the packages, everything finally started working.

I just got a fully functional miniupnpd binary running on 2.6.0. Still need to make the changes I want to make to source code, diff, etc, but much easier now that I have a working env.

note: I also got lucky, because half of my ports packages failed due to dependencies with devel/libffi-3.3, print/texinfo-6.8 and net/zabbix54-agent-5.4.7. But thankfully miniupnpd doesn't depend on any of them, so I decided to ignore and move on. YMMV.

THANK YOU!

[guiambros]

@guiambros said in pfSense compile requirements for 3rd party software:

I just got a fully functional miniupnpd binary running on 2.6.0. Still need to make the changes I want to make to source code, diff, etc, but much easier now that I have a working env.

Ugh, I spoke too soon. Its true that with FreeBSD 12.3.5 the resulting miniupnpd binary doesn't immediately throw ioctl() errors like before, but further tests indicated that new binary still rejects UPnP requests from clients.

@encrypt1d , I think your initial motivation was miniupnpd as well,no? Were you able to compile successfully? If yes, would you mind sharing a tarball of your resulting source files? Or at least config.h, so I can see which options you have enabled.

It's incredible how painful this is. I wonder if all package developers go through the same journey to set up their initial environment, or there's a docker/vm image somewhere that simplifies this.

[encrypt1d]

@guiambros Really glad to hear this helped.

This is actually a 2 part fix, depending on your ISP setup.

On release 2.6.0, you need to apply a patch first:
"Add UPnP NAT Anchors to fix outbound NAT for multiple consoles. (Redmine #7727, Forum Thread)".
You can do that from the "System" Menu under patches - but you might need to add the Patching package first from the Package Manager.

The Miniupnpd fix specifically allows for Double NAT scenarios to work (where your ISP gives you a private address like 10.x.x.x). If you aren't double NATed, just applying the patch should do it for you.

The folks that maintain the miniupnpd package have included the double NAT fix in 2.3.1. PFSense 2.7.0 is dropping very soon - I am hoping it will contain the right version of minupnpd. Maybe @jimp can confirm?

https://github.com/miniupnp/miniupnp/issues/598#issuecomment-1462959757

Now we get to do this all over again with 2.7.0 ;) I built custom logging into mine so I can get alerts when things punch holes in my firewall. UPNP is scary stuff. I will pretty much always run a custom build because of that.

[guiambros]

Thanks again!

@encrypt1d said in pfSense compile requirements for 3rd party software:

Now we get to do this all over again with 2.7.0 ;)

Ha, indeed, 2.7.0 just arrived a couple of days ago. The upgrade went smoothly, but I still want to customize my miniupnpd. In my case I don't have an issue with double NAT, but I want to fix an issue with log spam, and add some custom logging for security.

I built custom logging into mine so I can get alerts when things punch holes in my firewall. UPNP is scary stuff. I will pretty much always run a custom build because of that.

Any idea when RELENG_2._7_0 will be tagged on pfSense repo? I see recent commits in the master branch, but no indication of which commit was used for 2.7.0.

I guess we'll have to wait a few more days/weeks for github to catch up with Netgate's internal repo.

[fabricioguzzy]

@guiambros - I am also looking for the **"FreeBSD_ports RELENG_2_7_0 branch **" - Actually all the 2_7_0 branches are missing. (pfSense, FreeBSD and Ports)

[guiambros]

Quick update: I was finally able to successfully compile packages - and they work properly on 2.7.0! That's a first for me; all my previous attempts with 2.6.0 resulted in a binary that had all sorts of ioctl() errors.

The RELENG_2_7_0 branch does not yet exist on GitHub, but the master (pfSense) and devel-main (FreeBSD-src) branches seems to be close enough to what was just released, so most packages should be the same at this point. In my case I was only interested in miniupnpd package, so YMMV.

My step-by-step:

1. VM with FreeBSD 14.0-CURRENT
2. Follow the excellent steps above by @encrypt1d. Only pfSense source is needed; stay on the master branch
3. On build.conf, use export FREEBSD_BRANCH=devel-main
4. Create Poudriere jail, and build the ports
5. In my case I had 2 packages failed (missing original sources print/psutils and sysutils/pfSense-repoc) and 10 skipped due to dependencies.
6. Find the package directory (e.g. /usr/local/poudriere/ports/pfSense_devel/net/miniupnpd), use make extract to get the source code, modify the source as needed, and run make package to recompile. Package will be put on .../work/stage

After weeks of trial-and-error, this was the first time I was able to have a functional miniupnpd running in production.

I still want to grab the official RELENG_2_7_0 once released and recompile everything, but for now this is already a step in the right direction.

[encrypt1d]

@guiambros

I started down the path of trying to get a 2_7_2 build going recently. It seems that both labels RELENG2_7_1 and RELENG2_7_2 exist, but if I use RELENG2_7_2 the jail build fails with a compile failure on the AES-586 object, so I stuck with 2_7_1.

2_7_1 seems to create the jail ok, but then I run into build issues.

The variables in the build.conf file that control the repos used to be:

export FREEBSD_REPO_BASE=https://github.com/pfsense/FreeBSD-src.git
export FREEBSD_BRANCH=RELENG_2_7_1
export PKG_REPO_SERVER_DEVEL="pkg+https://beta.pfsense.org/packages"
export PKG_REPO_SERVER_RELEASE="pkg+https://pkg.pfsense.org"
export PKG_REPO_SERVER_STAGING="pkg+https://pkg.pfsense.org"

These domains don't have IP address records anymore (or maybe never?).

What did you use for your build.conf?

When I ran my first build, it seems I am missing packages:

[00:00:11] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-agent4
[00:00:11] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-proxy4

Trying to install these seems to use some default repos that don't exist:

# pkg update
Updating pfSense-core repository catalogue...
pkg: No SRV record found for the repo 'pfSense-core'
pkg: An error occured while fetching package
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-core/meta.txz -- pkg+:// implies SRV mirror type
repository pfSense-core has no meta file, using default settings
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-core/packagesite.pkg -- pkg+:// implies SRV mirror type
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-core/packagesite.txz -- pkg+:// implies SRV mirror type
Unable to update repository pfSense-core
Updating pfSense repository catalogue...
pkg: No SRV record found for the repo 'pfSense'
pkg: An error occured while fetching package
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-pfSense_%%VERSION%%/meta.txz -- pkg+:// implies SRV mirror type
repository pfSense has no meta file, using default settings
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-pfSense_%%VERSION%%/packagesite.pkg -- pkg+:// implies SRV mirror type
pkg: packagesite URL error for pkg+http://release-staging.nyi.netgate.com/ce/packages/pfSense_%%OSVERSION%%_amd64-pfSense_%%VERSION%%/packagesite.txz -- pkg+:// implies SRV mirror type
Unable to update repository pfSense
Error updating repositories!

These repo domain names also don't exist. I think they are defined in builder_defaults.sh.

Would you mind sharing your build.conf file, or any changes to builder_defaults.sh?

Much appreciated.

[encrypt1d]

I thought I was on to something when I found these files in the pfsense repo that don't seem to be included when you do a clone on the RELENG2_7_1 branch:

pfSense-repo-devel.abi
pfSense-repo-devel.altabi
pfSense-repo-devel.conf
pfSense-repo-devel.descr
pfSense-repo-previous.abi
pfSense-repo-previous.altabi
pfSense-repo-previous.conf
pfSense-repo-previous.descr
pfSense-repo.abi
pfSense-repo.altabi
pfSense-repo.conf
pfSense-repo.descr

Putting those in ./tools/templates/pkg_repos didn't help though.

I watched my DNS queries on my old working 2_6_0 VM build, and they were going to pkg01-atx.netgate.com, so I tried this in my build.conf:

export PKG_REPO_SERVER_DEVEL="pkg+https://pkg01-atx.netgate.com/packages"
export PKG_REPO_SERVER_RELEASE="pkg+https://pkg01-atx.netgate.com"
export PKG_REPO_SERVER_STAGING="pkg+https://pkg01-atx.netgate.com"

No joy. On a fresh install, the pkg repos are ok, but after running ./build.sh --setup, the pkg repos are just broken.

Hoping @bmeeks or @guiambros know what works in terms of the repo list.

[bmeeks]

@encrypt1d said in pfSense compile requirements for 3rd party software:

Hoping @bmeeks or @guiambros know what works in terms of the repo list.

I am reasonably sure you are just spinning wheels here on an impossible quest (that being building pfSense from the open-source repo on GitHub) -- at least since the last update to 2.7.2.

There is a new proprietary module called pfSense-repoc that handles all the repo-related stuff now on installation. It also handles the updates now in versions since at least 2.7.1. The source code for that package module is hosted on the private Netgate GitLab account, that's why I said it is proprietary because it is not available on the public GitHub. I strongly suspect that without that package in place, the repo stuff in your pfSense build is going to be broken.

There is also now another new pfSense package that needs to be built, and that package's source code is also hosted on the private Netgate GitLab and not on the public GitHub repo.

I don't try to build a pfSense kernel. All I build is the packages repo, but even for that now I have to go in and manually remove the runtime dependencies from the pfSense-upgrade package so that it does not try and pull in the proprietary pfSense-repoc package (which can't be built because its source code is in GitLab and not on GitHub). I also, starting with 2.7.2, have to comment out the build of the pfSense package in the poudriere.bulk file because that package's code is also on the private GitLab site.

[encrypt1d]

@bmeeks said in pfSense compile requirements for 3rd party software:

I don't try to build a pfSense kernel. All I build is the packages repo, but even for that now I have to go in and manually remove the runtime dependencies from the pfSense-upgrade package so that it does not try and pull in the proprietary pfSense-repoc package

This is all I am really trying to do as well. I had the instructions I wrote from 2_6_0 to go on, which obviously won't work now based on everything you have pointed out that has changed.

Do I simply clone FreeBSD-ports and try to build again without the jail? What might be the path forward?

[bmeeks]

@encrypt1d said in pfSense compile requirements for 3rd party software:

Do I simply clone FreeBSD-ports and try to build again without the jail? What might be the path forward?

You can build the jail. You just can't build a pfSense kernel itself.

Clone both the FreeBSD-ports tree and the pfSense tree from the public GitHub repo.

I edited the pfsense/build.conf file to point to the RELENG_2_7_2 branch.

Then you need to comment out the lines pertaining to GNID in the builder_common.sh file so that the jail build does not try and pull down the proprietary Netgate ID source code files.

Change into the pfsense git clone directory.

Next, fetch the FreeBSD source files with: ./build.sh --update-sources.

You should now be able to create the poudriere jail with ./build.sh --setup-poudriere.

I then edited tools/conf/pfPorts/poudriere.bulk to comment out the pfSense package so that a build of it will not be attempted (which would fail during the fetch phase due to the GitLab host location). Here is the edit to poudriere.bulk:

#security/%%PRODUCT_NAME%%

Now go into your Poudriere ports tree (/usr/local/poudriere/ports/) and find the sysutils/pfSense-upgrade package. Edit its runtime depencies in the Makefile to comment out the pfSense-repoc package.

Packages should build now unless I've forgotten something off the top of my head.

But note the steps outlined above will NOT build a pfSense image. They only allow you to build the FreeBSD-ports packages repo tree.

[encrypt1d]

@bmeeks

Thanks, that was helpful. I assume I now need the "-c" option for build.sh so that it doesn't try to build the kernel, but yet it still seems to need it see "installing kernel" in the logs below.

# ./build.sh none -a amd64.amd64 -c
>>> Operation ./build.sh has started at Mon Feb 12 03:04:31 EST 2024
>>> Building image type(s):
>>> Cleaning up previous build environment...Please wait!
>>> Cleaning build directories: Done!
>>> Cleaning previously built kernel stage area...Done!
>>> Cleaning previously built images...Done!
>>> Cleaning previous builder logs...Done!
>>> Cleaning of builder environment has finished.
>>> NO_BUILDWORLD and NO_BUILDKERNEL set, skipping update of freebsd sources
>>> Last known commit Luiz Otavio O Souza - cf612ab9fc5711351fef5e0678d687aa3b88355d
>>> LOGFILE set to /build/pfsense/logs/buildworld.amd64.
>>> NO_BUILDWORLD set, skipping build
>>> Building pfSense kernel.
>>> NO_BUILDKERNEL set, skipping build
>>> Staging pfSense kernel...
>>> Installing kernel (pfSense) for amd64 architecture...
====>> ERROR: SRCCONF is pointing to a nonexistent file /build/pfsense/tmp/FreeBSD-src/release/conf/pfSense_src.conf

####################################
Something went wrong, check errors!
####################################

A second issue I am having is that no matter what I try, the jail build always fails for me on 2.7.2 when it gets to this:

--- secure/lib/libcrypto__L ---
make[4]: make[4]: don't know how to make aes-586.S. Stop
make[4]: stopped in /usr/local/poudriere/jails/pfSense_v2_7_2_amd64/usr/src/secure/lib/libcrypto
make[3]: stopped in /usr/local/poudriere/jails/pfSense_v2_7_2_amd64/usr/src

At a loss on how to solve that one. It works fine on 2.7.1 though.

[bmeeks]

@encrypt1d said in pfSense compile requirements for 3rd party software:

@bmeeks

Thanks, that was helpful. I assume I now need the "-c" option for build.sh so that it doesn't try to build the kernel, but yet it still seems to need it see "installing kernel" in the logs below.

# ./build.sh none -a amd64.amd64 -c
>>> Operation ./build.sh has started at Mon Feb 12 03:04:31 EST 2024
>>> Building image type(s):
>>> Cleaning up previous build environment...Please wait!
>>> Cleaning build directories: Done!
>>> Cleaning previously built kernel stage area...Done!
>>> Cleaning previously built images...Done!
>>> Cleaning previous builder logs...Done!
>>> Cleaning of builder environment has finished.
>>> NO_BUILDWORLD and NO_BUILDKERNEL set, skipping update of freebsd sources
>>> Last known commit Luiz Otavio O Souza - cf612ab9fc5711351fef5e0678d687aa3b88355d
>>> LOGFILE set to /build/pfsense/logs/buildworld.amd64.
>>> NO_BUILDWORLD set, skipping build
>>> Building pfSense kernel.
>>> NO_BUILDKERNEL set, skipping build
>>> Staging pfSense kernel...
>>> Installing kernel (pfSense) for amd64 architecture...
====>> ERROR: SRCCONF is pointing to a nonexistent file /build/pfsense/tmp/FreeBSD-src/release/conf/pfSense_src.conf

####################################
Something went wrong, check errors!
####################################

A second issue I am having is that no matter what I try, the jail build always fails for me on 2.7.2 when it gets to this:

--- secure/lib/libcrypto__L ---
make[4]: make[4]: don't know how to make aes-586.S. Stop
make[4]: stopped in /usr/local/poudriere/jails/pfSense_v2_7_2_amd64/usr/src/secure/lib/libcrypto
make[3]: stopped in /usr/local/poudriere/jails/pfSense_v2_7_2_amd64/usr/src

At a loss on how to solve that one. It works fine on 2.7.1 though.

No, that's actually a problem with the copy of FreeBSD-src in the public repo. I had forgotten about that. There is a specific setting or optional argument to pass when building the jail. Let me consult my email history to see if I can find it.

Later Update: Here is the fix for that error. Add this to the file /usr/local/etc/poudriere.d/src.conf --

WITHOUT_LIB32=y

[bmeeks]

Also, if you only want to build the poudriere ports tree, then run this command:

./build.sh --update-pkg-repo -a amd64.amd64

The changes I mentioned in posts above still are not likely to yield a successful kernel build. And if it builds, I'm not sure it will work correctly connecting to the official Netgate pfSense repositories for package installs and updates.

[encrypt1d]

@bmeeks

Getting there :)

The jail build now completes, although if I specify only the amd64 target, it goes much faster as it doesn't build other targets:

./build.sh --setup-poudriere -a amd64.amd64

Also, I needed to create this file, as it did not exist for me, but worked all the same:

/usr/local/etc/poudriere.d/src.conf

When I try and build the ports now I am right back to this error now, which probably means I have to set another variable or comment out something somewhere ;)

# ./build.sh --update-pkg-repo -c -a amd64.amd64
>>> Operation ./build.sh has started at Sat Feb 10 20:44:25 EST 2024
>>> Poudriere bulk started at 2024/02/10 20:44:25 for amd64.amd64
[00:00:00] Creating the reference jail... done
[00:00:00] Mounting system devices for pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Warning: Using packages from previously failed, or uncommitted, build: /usr/local/poudriere/data/packages/pfSense_v2_7_2_amd64-pfSense_devel/.building
[00:00:00] Mounting ports from: /usr/local/poudriere/ports/pfSense_devel
[00:00:00] Mounting packages from: /usr/local/poudriere/data/packages/pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Mounting distfiles from: /usr/ports/distfiles
[00:00:00] Appending to make.conf: /usr/local/etc/poudriere.d/pfSense_devel-make.conf
/etc/resolv.conf -> /usr/local/poudriere/data/.m/pfSense_v2_7_2_amd64-pfSense_devel/ref/etc/resolv.conf
[00:00:00] Starting jail pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Will build as nobody:nobody (65534:65534)
[00:00:01] Logs: /usr/local/poudriere/data/logs/bulk/pfSense_v2_7_2_amd64-pfSense_devel/2024-02-10_20h44m25s
[00:00:01] Loading MOVED for /usr/local/poudriere/data/.m/pfSense_v2_7_2_amd64-pfSense_devel/ref/usr/ports
[00:00:01] Ports supports: FLAVORS SUBPACKAGES SELECTED_OPTIONS
[00:00:01] Inspecting ports tree for modifications to git checkout... yes
[00:00:01] Ports top-level git hash: c3a0cffb7 (dirty)
[00:00:01] Gathering ports metadata
[00:00:01] Warning: MOVED: emulators/qemu-guest-agent renamed to emulators/qemu@guestagent
[00:00:01] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-agent4
[00:00:01] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-proxy4]
[00:00:01] Error: Fatal errors encountered gathering initial ports metadata]**
[pfSense_v2_7_2_amd64-pfSense_devel] [2024-02-10_20h44m25s] [crashed] Queued: 0  Built: 0  Failed: 0  Skipped: 0  Ignored: 0  Fetched: 0  Tobuild: 0   Time: 00:00:00
[00:00:01] Logs: /usr/local/poudriere/data/logs/bulk/pfSense_v2_7_2_amd64-pfSense_devel/2024-02-10_20h44m25s
[00:00:01] Cleaning up
[00:00:01] Unmounting file systems
Exiting with status 1
>>> ERROR: Something went wrong...

[bmeeks]

@encrypt1d said in pfSense compile requirements for 3rd party software:

@bmeeks

Getting there :)

The jail build now completes, although if I specify only the amd64 target, it goes much faster as it doesn't build other targets:

./build.sh --setup-poudriere -a amd64.amd64

Also, I needed to create this file, as it did not exist for me, but worked all the same:

/usr/local/etc/poudriere.d/src.conf

When I try and build the ports now I am right back to this error now, which probably means I have to set another variable or comment out something somewhere ;)

# ./build.sh --update-pkg-repo -c -a amd64.amd64
>>> Operation ./build.sh has started at Sat Feb 10 20:44:25 EST 2024
>>> Poudriere bulk started at 2024/02/10 20:44:25 for amd64.amd64
[00:00:00] Creating the reference jail... done
[00:00:00] Mounting system devices for pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Warning: Using packages from previously failed, or uncommitted, build: /usr/local/poudriere/data/packages/pfSense_v2_7_2_amd64-pfSense_devel/.building
[00:00:00] Mounting ports from: /usr/local/poudriere/ports/pfSense_devel
[00:00:00] Mounting packages from: /usr/local/poudriere/data/packages/pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Mounting distfiles from: /usr/ports/distfiles
[00:00:00] Appending to make.conf: /usr/local/etc/poudriere.d/pfSense_devel-make.conf
/etc/resolv.conf -> /usr/local/poudriere/data/.m/pfSense_v2_7_2_amd64-pfSense_devel/ref/etc/resolv.conf
[00:00:00] Starting jail pfSense_v2_7_2_amd64-pfSense_devel
[00:00:00] Will build as nobody:nobody (65534:65534)
[00:00:01] Logs: /usr/local/poudriere/data/logs/bulk/pfSense_v2_7_2_amd64-pfSense_devel/2024-02-10_20h44m25s
[00:00:01] Loading MOVED for /usr/local/poudriere/data/.m/pfSense_v2_7_2_amd64-pfSense_devel/ref/usr/ports
[00:00:01] Ports supports: FLAVORS SUBPACKAGES SELECTED_OPTIONS
[00:00:01] Inspecting ports tree for modifications to git checkout... yes
[00:00:01] Ports top-level git hash: c3a0cffb7 (dirty)
[00:00:01] Gathering ports metadata
[00:00:01] Warning: MOVED: emulators/qemu-guest-agent renamed to emulators/qemu@guestagent
[00:00:01] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-agent4
[00:00:01] Error: Nonexistent origin listed: net-mgmt/pfSense-pkg-zabbix-proxy4]
[00:00:01] Error: Fatal errors encountered gathering initial ports metadata]**
[pfSense_v2_7_2_amd64-pfSense_devel] [2024-02-10_20h44m25s] [crashed] Queued: 0  Built: 0  Failed: 0  Skipped: 0  Ignored: 0  Fetched: 0  Tobuild: 0   Time: 00:00:00
[00:00:01] Logs: /usr/local/poudriere/data/logs/bulk/pfSense_v2_7_2_amd64-pfSense_devel/2024-02-10_20h44m25s
[00:00:01] Cleaning up
[00:00:01] Unmounting file systems
Exiting with status 1
>>> ERROR: Something went wrong...

Ah-- it's trying to build the DEVEL branch. That one I'm not sure works 100% yet. I am currently only building the RELENG_2_7_2 branch (which is the current CE Release branch).

You need to be sure your build.conf file is specifying the RELENG_2_7_2 branch. It defaults to the DEVEL branch. You need these lines in your build.conf file:

# Define FreeBSD repository, branch and specific commit
export FREEBSD_REPO_BASE=https://github.com/pfsense/freebsd-src.git
export FREEBSD_BRANCH=RELENG_2_7_2

# Branch to replace pkg.conf template, defaults to $GIT_REPO_BRANCH_OR_TAG
export PKG_REPO_BRANCH_DEVEL="RELENG_2_7_2"
export PKG_REPO_BRANCH_RELEASE="RELENG_2_7_2"

There may also be some other changes required. I made a number of them the last time I reconstructed my package builder environment, and I forgot to write some of them down (witness that previous 32-bit library build command I posted).

I don't believe Netgate has actually tested a complete build from the available public repos. It fails in a number of ways without a lot of under-the-covers hacking to get it to work. And even then it only works partially, because at least two key packages are hosted on their private and proprietary GitLab repo and not on the public GitHub repo. Netgate has their own private build systems and environments for CE and Plus, and based on the current condition of the public GitHub available stuff, they must never attempt a build from that public stuff. Because it does not work out-of-the-box without a lot of tweaking and hacking. And I can somewhat understand why as they don't exactly want to make it super easy for anyone to build a pfSense clone (the whole trademark protection thing, which is justified).