Huawei 4G/LTE USB findings
-
Yes, there's only one config index shown so no change of selecting something different in pfSense. There are 5 interfaces shown but none is obviously a serial connection.
Just as an example this is a modem that is supported by u3g:
[22.01-RELEASE][admin@6100.stevew.lan]/root: usbconfig -d ugen0.2 dump_all_desc ugen0.2: <Huawei Technologies Co., Ltd. HUAWEI Mobile> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0210 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x00ff bMaxPacketSize0 = 0x0040 idVendor = 0x12d1 idProduct = 0x15c1 bcdDevice = 0x0102 iManufacturer = 0x0001 <Huawei Technologies Co., Ltd.> iProduct = 0x0002 <HUAWEI Mobile> iSerialNumber = 0x0003 <0123456789ABCDEF> bNumConfigurations = 0x0003 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x012d bNumInterfaces = 0x0006 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0001 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0003 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0010 iInterface = 0x0007 <Huawei Mobile Connect - Modem> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x00 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x000a bInterval = 0x0009 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 2 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0013 iInterface = 0x0008 <Huawei Mobile Connect - Application> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0012 iInterface = 0x0009 <Huawei Mobile Connect - Pcui> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0084 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0016 iInterface = 0x000a <HUAWEI Mobile Connect - Network Card> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x06 bDescriptorType = 0x24 bDescriptorSubType = 0x1a RAW dump: 0x00 | 0x06, 0x24, 0x1a, 0x00, 0x01, 0x1f Additional Descriptor bLength = 0x0d bDescriptorType = 0x24 bDescriptorSubType = 0x0f RAW dump: 0x00 | 0x0d, 0x24, 0x0f, 0x0c, 0x0f, 0x00, 0x00, 0x00, 0x08 | 0xea, 0x05, 0x03, 0x00, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x03, 0x03 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0086 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0010 bInterval = 0x0005 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 Alt 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0001 bNumEndpoints = 0x0003 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0016 iInterface = 0x000b <CDC Network Data> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0086 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0010 bInterval = 0x0005 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0085 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 2 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0004 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 4 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0004 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0014 iInterface = 0x000e <Huawei Mobile Connect - Gps> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x04 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0087 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0005 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 5 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0005 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x001b iInterface = 0x000f <Huawei Mobile Connect - Serial B> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x05 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0088 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0006 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Configuration index 1 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0120 bNumInterfaces = 0x0007 bConfigurationValue = 0x0002 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0001 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0002 <Communication device> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0000 iInterface = 0x0010 <CDC Ethernet Control Model (ECM)> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Additional Descriptor bLength = 0x0d bDescriptorType = 0x24 bDescriptorSubType = 0x0f RAW dump: 0x00 | 0x0d, 0x24, 0x0f, 0x12, 0x00, 0x00, 0x00, 0x00, 0x08 | 0xea, 0x05, 0x00, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0010 bInterval = 0x0005 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0000 iInterface = 0x0011 <CDC Ethernet Data> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0003 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0010 iInterface = 0x0007 <Huawei Mobile Connect - Modem> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0084 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x000a bInterval = 0x0009 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 2 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0013 iInterface = 0x0008 <Huawei Mobile Connect - Application> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x03 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0085 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 4 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0004 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0012 iInterface = 0x0009 <Huawei Mobile Connect - Pcui> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x04 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0086 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0004 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 5 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0005 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0014 iInterface = 0x000e <Huawei Mobile Connect - Gps> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x05 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0087 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0005 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 6 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0006 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x001b iInterface = 0x000f <Huawei Mobile Connect - Serial B> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x06 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0088 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0006 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Configuration index 2 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0089 bNumInterfaces = 0x0003 bConfigurationValue = 0x0003 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0001 Additional Descriptor bLength = 0x08 bDescriptorType = 0x0b bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x08, 0x0b, 0x00, 0x02, 0x02, 0x0e, 0x00, 0x0d Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0002 <Communication device> bInterfaceSubClass = 0x000e bInterfaceProtocol = 0x0000 iInterface = 0x000a <HUAWEI Mobile Connect - Network Card> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x0c bDescriptorType = 0x24 bDescriptorSubType = 0x1b RAW dump: 0x00 | 0x0c, 0x24, 0x1b, 0x00, 0x01, 0x00, 0x04, 0x20, 0x08 | 0x80, 0xdc, 0x05, 0x20 Additional Descriptor bLength = 0x08 bDescriptorType = 0x24 bDescriptorSubType = 0x1c RAW dump: 0x00 | 0x08, 0x24, 0x1c, 0x00, 0x01, 0x10, 0xdc, 0x05 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0010 bInterval = 0x0005 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0000 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0002 iInterface = 0x000b <CDC Network Data> Interface 1 Alt 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0001 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0002 iInterface = 0x000b <CDC Network Data> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0014 iInterface = 0x000e <Huawei Mobile Connect - Gps> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000Which shows in the boot log as:
ugen0.2: <Huawei Technologies Co., Ltd. HUAWEI Mobile> at usbus0 u3g0 on uhub0 u3g0: <Huawei Mobile Connect - Modem> on usbus0 u3g0: Found 5 ports.Resulting in:
[22.01-RELEASE][admin@6100.stevew.lan]/dev: ls cuaU* cuaU0.0 cuaU0.0.lock cuaU0.1.init cuaU0.2 cuaU0.2.lock cuaU0.3.init cuaU0.4 cuaU0.4.lock cuaU0.0.init cuaU0.1 cuaU0.1.lock cuaU0.2.init cuaU0.3 cuaU0.3.lock cuaU0.4.initIt finds the USB ethernet device on yoru modem because the cdce driver will attach to any cdc Ethernet device, it doesn't need to have the exact matching USB IDs.
Steve
-
So no hope of getting that stick running? It is more or less he only stick you can buy these days, so it's a little difficult getting something else that will be supported.
I'm guessing it's not so much a driver thing (likely the same drivers will work), but it's rather an issue where it doesn't recognize the ID/devices and then does not know which drivers to use to attach to the devices.
Any chance I can low level edit something to make it attach the standard drivers to this 0x155e ID? -
@stephenw10 I should mention that It seems my Aruba AP’s use the CDC interface to make the 4G connection, so that is likely the interface to use. But whether that is the serial Interface or a API interface I don’t know. I can see your Huawei have the CDC as well, but also somthing called Serial B.
Can you figure out which device number corresponds to the cuaUx.x interface you use to control the 4G connection with?
-
Mmm, it's unfortunately difficult to add devices to u3g to test because the values are tied into the OS. You need to recompile everything.
I see there are a number of threads reporting similar or identical responses with that device and no good result.
The immediate disconnect thing is odd. Doesn't look like anyone else has found a reason for that either.
-
@stephenw10 said in Huawei 4G/LTE USB findings:
Mmm, it's unfortunately difficult to add devices to u3g to test because the values are tied into the OS. You need to recompile everything.
I see there are a number of threads reporting similar or identical responses with that device and no good result.
The immediate disconnect thing is odd. Doesn't look like anyone else has found a reason for that either.
Since this is a bit outside netgate’s jurisdiction (base OS driver updates), I guess there is no need to get my hopes too high.
Given BSD always had lackluster support in the cellular department, I’ll put this project on lifesupport until support for 4G dongles you can actually get is present.But Thanks for the insight
-
I have two here, both are internal m.2 cards but still USB connected. Neither are current though so it's hard to recommend for a new deployment.
The only thing that will always work is an external Ethernet connected LTE modem.Steve
-
Okay so after a lot of troubleshooting, I finally seem to have got this working, although I have got this working before on older pfsense versions.
Currently on a SG4860-1U running pfSense 23.05.1, I attached the Huawei E3372h-320 via USB.
Beforehand, please note that this worked on a previous version, somewhere last year (A older FreeBSD release, I think 12?), by just using usb_modeswitch and switching from Drive mode to USB Ethernet mode,
however, when currently doing that it doesn't recognize the device.So after some digging I found out that it is now recognized in NCM mode, as described above in option 3, so with USB Product ID 0x155e.
Well, this made me want to just try using a PPP interface and one of the /dev/cuau ports, I tried them all.
Some responded, some didn't, the ones that responded however were still faulting:
CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: labelWell, after a short amount of googling I found this topic:
https://forum.netgate.com/topic/53105/pfsense-and-huawei-e3276-4g/9Which mentioned: "I found that running this manually and removing the S0=0 string it worked"
So, I did and put this in the init string field in the settings:
&F&C1&D2E0And tadaaa, it worked, the interface is now correctly registered and received the WAN IP, no more double NAT, too, and no flashing at all :-)
Settings I configured in the PPP options:
/dev/cuaU0.0 (although, please try others too and see if the modem responds by reading the logs).
Phone number, #777, no idea if that is OK, although I think that I have to use a CDMA network, it works for my provider at least...
Sim pin,
Sim pin wait = 30, to be sure.
Init string with settings above.That's it, then just assign it to an interface and be done with it.
No more usb_modeswitching, (I even removed the package), just working out of the box! (For now... hehe)
-
@randommen I’m not sure I understand. Does it switch automatically to NCM mode when inserted or after a reboot?
I assume pfSense still autodiscovers the Ethernet device side of the bridge when in NCM mode?If it does, could you post a screenshot of your PPP/Serial port settings to actually control it/make it connect on the 4G side?
-
@keyser Yes it seems to switch to NCM mode automatically, no action taken, directly after plugging in and after reboot.
It does stil discover the ue0 device, too yes. Didn't try using it.It is now working 20 hours concurrently.
See attachment, all the red things I configured, all the others I didn't really touch.
Then just assign it to an interface and it is working.
I had to play around with the link interface, just try every single one and see what it does for you.
You can watch the PPP log under /var/log/ppp.log or system logs in the GUI.
-
@randommen Thanks - I’ll see if I can get time to play with it. I find it strange that you need to use serial interface as the actual datainterface. As far as I understand, the ue0 Ethernet interface should be a transparent bridge to the 4G connection and should be your WAN over Ethernet - just like any other Ethernet based WAN link.
-
@randommen That would eliminate the PPP part with all its performance and throughput issues….
-
T tompark referenced this topic on
