Unable to connect to OPEN VPN server through WAN2 (multiwan)
-
Hi,
My network setup is as follows
MultiWan-Loadbalancing-failover (WAN1 / WAN2)
|
PFsense (openvpn)
(address pool =192.168.10.0/24)
|
LAN Subnet
(192.168.1.0/24)
|
Another LAN Subnet (192.168.0.0/24)
(gateway for this subnet is 192.168.1.3.
this is actually a proxy and mail server
this subnet is not directly connected to PFSense)I have configured OPENVPN and I am able to connect through WAN1 but I am unable to connect to through WAN2. The Static route added to connect another lan is as follows.
Interface Network Gateway Description
LAN 192.168.0.0/24 192.168.1.3 route to lan
Now the problem is I am not able to connect through WAN2
if anybody have any solution please write to me
-
sounds like OPENVPN may only be running on the first WAN interface. Maybe anthor Hero member can give you a advise on how to get OPENVPN running on both interfaces.
RC -
Afaik you need to add a line in the "custom option" field.
I think it was the "–local host" command. -
Yeah, you can leave off the "–" part of the command, which is for use when you call it from a command line.
local 1.2.3.4
Just putting that in the custom options should do it (remember to use a semicolon to separate multiple options if you have more). After you save it look in System Logs -> OpenVPN to make sure it's binding to the correct IP.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy