Upgrade M.2 storage on Netgate 4100
-
So when you reset the config? Does it do it when you reboot normally?
-
The reboot using menu #5 is giving the same result.
Also does a change of the boot priority order (by invoking the boot menu pressing F2) - so it's not related to the OS itself I'd say. -
What do the LEDs show?
There some internal LEDs that may show something if it's stuck at some lower power state.
There's not much we can do there though. There's nothing to change.
-
It's the circle LED in solid orange.
-
Hmm, then it's failing to POST. The internal LEDs may tell you more but, as I say, there's nothing that can be set to affect that.
-
At the moment I would suspect it's related to what other users also experienced in https://redmine.pfsense.org/issues/15110
-
Yes, very likely the same issue. That specific drive is mentioned.
Make sure you're running the current Blinkboot version. Though I'm not aware of any specific fixes in it.
-
Thanks, will also check later whether there's an update the Netgate Firmware Update package will offer.
Ihis is a really annoying issue, we already have some 4100 and 6100 with defective eMMCs and OOW.... (and we are not the only ones).
-
Not a real success here. 03.00.00.03t-uc-18 is on the device and also the firmware version offered by the latest Netgate Firmware Upgrade package (23.05.01) which comes along with pfSense 24.03.
-
Yup, that's the current version.
