Access from Client through HQ to Branch-Sites

s25a

Hi everyone,

please find a screenshot attached. Here you can see the basic concept and addresses.

The S2S VPN from Branch to HQ works vice. The Pfsense in the Branch can ping the HQ and vice versa
The Dial-In also Works. The Client can ping HQ-Pfsense and the HQ-Server.
The issue is on the connection to the branch side. The ping to the Branch PFSense does not work (red arrow)

As I am pretty new to all this I am not really sure where to start. Just for testing I setup another S2S VPN to the HQ and here the connection form this side was possible to the other branch. However with the dial-in it does not work.

Attached please find also the Tunnel-Settings for the S2S and the Dial-UP on the server as well as the client-Settings

Any idea?

Thanks S
2023-01-18 12_35_59.jpg

viragomann

@s25a
You screens don't show the branch settings. Maybe you're missing the access server tunnel network (10.254.250.0/24) in the "Remote Networks" box there.

s25a

@viragomann said in Access from Client through HQ to Branch-Sites:

10.254.250.0/24

Thanks a lot. That was the problem :-)

Have a great day. S