pfBlockerNG-devel v3.1.0_19/10

BBcan177

@smoke_a_j If you can pm or email that regex list, I can check it out to see if there is some code improvement required.

nimrod

@yorke said in pfBlockerNG-devel v3.1.0_19/10:

@bbcan177

pfBlockerNG-devel 3.1.0_11 |ERROR| python module 'maxminddb
Pfsense 2.6.0-RELEASE
I upgraded pfBlockerNG-devel to 3.1.0_11 and got some issue before i upgraded everyting was work but now after the upgrade I am geting the errors listed below,
2023-01-20 18:16:12,627|ERROR| [pfBlockerNG]: Failed to load python module 'maxminddb': No module named 'maxminddb'
2023-01-20 18:16:12,627|ERROR| [pfBlockerNG]: Failed to load python module 'sqlite3': No module named '_sqlite3'

I got the same error on pfSense v2.6.0 since the upgrade to pfBlockerNG v3.1.0_11. I have cleared the error in py_error.log. Lets see if it comes back.

The report tab showns traffic being pass/block
the dashboard for DNSBL the packets stay at 0 the counter do not move, but the ip counter works

Same issue with IP Counter. It shows number of blocked IPs for a while, but when you refresh the page, counter goes to 0. This issue happens if you apply this patch via system patches package.

More details here.

If you revert this change, counter starts working as it should and it doesnt reset to 0 after some time.

Draco

@bbcan177 said in pfBlockerNG-devel v3.1.0_19/10:

Add "application/json" to list of allowed file download mime-types

I had hoped this might let pfBlocker directly download a JSON list like the one found at Microsoft Azure IPs. This is a file I manually download and then use pfSense's GUI CMD interface to upload for pfBlocker (I set the format to AUTO). Ran this on 3.1.0_11 just now.

It didn't work. So what JSON-related things were enabled with this change?

Thanks!

nimrod

It happened again after after update.

This is the content of py_error.log

2023-01-24 16:36:57,206|ERROR| [pfBlockerNG]: Failed to load python module 'maxminddb': No module named 'maxminddb'
2023-01-24 16:36:57,206|ERROR| [pfBlockerNG]: Failed to load python module 'sqlite3': No module named '_sqlite3'

Despite these errors, everything is working fine.

cmcdonald

@nimrod

What is the output of:

pkg info py* unbound

renegade

@cmcdonald
Same problem on my side.

[22.05-RELEASE][admin@firewall.home]/root: pkg info py* unbound
pkg: No match.

cmcdonald

@renegade

Sorry, try this:

pkg info "py*" unbound

nimrod

@cmcdonald said in pfBlockerNG-devel v3.1.0_19/10:

@renegade

Sorry, try this:

pkg info "py*" unbound

Here it is:

[2.6.0-RELEASE][admin@pfSense.home.arpa]/root: pkg info "py*" unbound
py38-ply-3.11
py38-setuptools-57.0.0
py39-maxminddb-2.0.3
py39-setuptools-57.0.0
py39-sqlite3-3.9.9_7
python38-3.8.12_1
python39-3.9.9
unbound-1.13.2

cmcdonald

@nimrod Thanks. I see the problem. Testing a fix. Standby

cmcdonald

@nimrod can you also share pkg info unbound ?

nimrod

@cmcdonald said in pfBlockerNG-devel v3.1.0_19/10:

@nimrod can you also share pkg info unbound ?

Of course. Here it is:

[2.6.0-RELEASE][admin@pfSense.home.arpa]/root: pkg info unbound
unbound-1.13.2
Name           : unbound
Version        : 1.13.2
Installed on   : Mon Jan 31 21:24:27 2022 CET
Origin         : dns/unbound
Architecture   : FreeBSD:12:amd64
Prefix         : /usr/local
Categories     : dns
Licenses       : BSD3CLAUSE
Maintainer     : jaap@NLnetLabs.nl
WWW            : https://www.nlnetlabs.nl/projects/unbound
Comment        : Validating, recursive, and caching DNS resolver
Options        :
	DEP-RSA1024    : off
	DNSCRYPT       : off
	DNSTAP         : off
	DOCS           : off
	DOH            : on
	ECDSA          : on
	EVAPI          : off
	FILTER_AAAA    : off
	GOST           : on
	HIREDIS        : off
	LIBEVENT       : on
	MUNIN_PLUGIN   : off
	PYTHON         : on
	SUBNET         : off
	TFOCL          : off
	TFOSE          : off
	THREADS        : on
Shared Libs required:
	libexpat.so.1
	libnghttp2.so.14
	libpython3.8.so.1.0
	libevent-2.1.so.7
Shared Libs provided:
	libunbound.so.8
Annotations    :
	FreeBSD_version: 1203500
	build_timestamp: 2022-01-12T15:27:10+0000
	built_by       : poudriere-git-3.3.99.20211130
	cpe            : cpe:2.3:a:nlnetlabs:unbound:1.13.2:::::freebsd12:x64
	port_checkout_unclean: no
	port_git_hash  : 8df9544dcbab
	ports_top_checkout_unclean: yes
	ports_top_git_hash: 7046b65c0d41
	repo_type      : binary
	repository     : pfSense
Flat size      : 7.99MiB
Description    :
Unbound is designed as a set of modular components, so that also
DNSSEC (secure DNS) validation and stub-resolvers (that do not run as
a server, but are linked into an application) are easily possible.

Goals:
    * A validating recursive DNS resolver.
    * Code diversity in the DNS resolver monoculture.
    * Drop-in replacement for BIND apart from config.
    * DNSSEC support.
    * Fully RFC compliant.
    * High performance, even with validation enabled.
    * Used as: stub resolver, full caching name server, resolver library.
    * Elegant design of validator, resolver, cache modules.
          o provide the ability to pick and choose modules.
    * Robust.
    * In C, open source: The BSD license.
    * Smallest as possible component that does the job.
    * Stub-zones can be configured (local data or AS112 zones).

Non-goals:
    * An authoritative name server.
    * Too many Features.

WWW: https://www.nlnetlabs.nl/projects/unbound

cmcdonald

@nimrod Can you now try reinstalling pfBlockerNG-devel on 22.05/2.6, and repeat the above command pkg info "py*" unbound

nimrod

@cmcdonald said in pfBlockerNG-devel v3.1.0_19/10:

@nimrod Can you now try reinstalling pfBlockerNG-devel on 22.05/2.6, and repeat the above command pkg info "py*" unbound

I reinstalled it and here is the output:

[2.6.0-RELEASE][admin@pfSense.home.arpa]/root: pkg info "py*" unbound
py38-maxminddb-2.0.3
py38-ply-3.11
py38-setuptools-57.0.0
py38-sqlite3-3.8.12_7
py39-maxminddb-2.0.3
py39-setuptools-57.0.0
py39-sqlite3-3.9.9_7
python38-3.8.12_1
python39-3.9.9
unbound-1.13.2

cmcdonald

@nimrod That should be correct now. Clear the unbound errors and try again.

nimrod

@cmcdonald said in pfBlockerNG-devel v3.1.0_19/10:

@nimrod That should be correct now. Clear the unbound errors and try again.

Yup. That fixed it. Thank you sir.

BBcan177

@draco said in pfBlockerNG-devel v3.1.0_19/10:

I had hoped this might let pfBlocker directly download a JSON list like the one found at Microsoft Azure IPs. This is a file I manually download and then use pfSense's GUI CMD interface to upload for pfBlocker (I set the format to AUTO). Ran this on 3.1.0_11 just now.

The Link you posted is the HTML page. You need to use the direct link:

https://download.microsoft.com/download/7/1/D/71D86715-5596-4529-9B13-DA13A5DE5B63/ServiceTags_Public_20230123.json

Keep in mind that this will parse all IPs in the json file. You could also create a new shell script to parse this JSON and get more refinement on which IPs to pull ( "Advanced Tunables - Post-Script Script" feature.)

yorke

@bbcan177

I figure out why i was getting those errors some package/feature on pfsense needed to be update (ie unbound and about 4 others ) once I ran the update and reboot and reinstall
PfblockerNG work, no more errors.
Thanks BBcan177

bigjohns97

@cmcdonald I am seeing the same error about missing python modules on 23.01 RC, was this fixed on that version as well?

nimrod

@bigjohns97 said in pfBlockerNG-devel v3.1.0_19/10:

@cmcdonald I am seeing the same error about missing python modules on 23.01 RC, was this fixed on that version as well?

Yes.

Draco

@bbcan177 said in pfBlockerNG-devel v3.1.0_19/10:

he Link you posted is the HTML page. You need to use the direct link:
https://download.microsoft.com/download/7/1/D/71D86715-5596-4529-9B13-DA13A5DE5B63/ServiceTags_Public_20230123.json

Fair enough -- this means I will need to manually update the link each time, but better than copying the file from my computer up to pfSense each time, thanks!

I might have to write a screen-scraper to pull the latest URL off the download page...