Automatically routed to ISP router Private IP if a client VPN is active
- 
 @giuliolinux said in Automatically routed to ISP router Private IP if a client VPN is active: I will also try asking the provider to exclude this route from their router / default gateway. Which route do you mean? 
- 
 ... I mean to remove the 192.168.1.0/24 from their routes on the perimetral router of the ISP. Regards 
- 
 @giuliolinux 
 The router has an IP in the 192.168.1.0/24 subnet, and hence he also has a route for this.
 The IP is meant to give you access to it. Without the route that won't be possible.
- 
 Hi, I think there is a misunderstanding. Our WAN has a default gateway on a public subnet. This link allows us to apply virtual IPs on pfsense to manage the 64 Public IPs that the ISP provides us and then the various internal networks are routed externally via the outbound specifications that use some of the 64 Public IPs. None of our internal networks use the 192.168.1.0/24 subnet, and these routes are not present even in the VPNs we establish to our customers' destinations. So I assume that the public route on the ISP's p2p routes us to its device (basically we have no hops with a traceroute) ... 
- 
 
- 
 @giuliolinux 
 It's the next device to WAN directly linked to pfSense. I don't expect to see a hop to this IP.And there might also be no route. 
 I assume the ISP router as a public IP as well and this is used on pfSense as upstream gateway.
 So since your pfSense doesn't know any other route for 192.168.1.1, it will send requests to this destination to the gateway IP, which is the same device. So the router will respond to that.Same on your pfSense. You say, you have multiple internal networks. So you can go to a device in subnet A and call the subnet B IP of pfSense. Presumed the firewall rules on A allows it, pfSense will respond normally. 
- 
 Hi, I try to explain better below. Configuring our WAN: WAN address (point to point of the ISP): IP: 89.2**.2**.78 
 Def-GW: 89.2**.2**.77As I wrote above through the ISP's p2p connection we can use 64 IPs (Virtual IPs with Proxy Arp). This allows us to set outbound and inbound access to services. Let's say that I will describe this last aspect to you but it is not important in the evaluation of the subject matter. Pfsense routing - as shown below - means that there is no interface set up on the 192.168.1.1 network (it is an ISP device since we only hop from pfsense to that IP). default 89.2**.2**.77 UGS 686922 1500 bce1 
 1.0.0.1 10.128.0.1 UGHS 10625481 1500 em3
 1.1.1.1 89.212.25.77 UGHS 10624184 1500 bce1
 8.8.8.8 77.94.136.193 UGHS 10624818 1500 bce0
 10.0.0.0/24 10.10.82.1 UGS 1 1500 ovpnc35
 10.0.1.0/28 link#11 U 24068685 1500 em2.100
 10.0.1.14 link#11 UHS 0 16384 lo0
 10.0.1.16/28 link#12 U 24371836 1500 em2.101
 10.0.1.30 link#12 UHS 0 16384 lo0
 10.0.1.32/28 link#13 U 0 1500 em2.102
 10.0.1.46 link#13 UHS 0 16384 lo0
 10.0.1.48/28 link#14 U 0 1500 em2.103
 10.0.1.62 link#14 UHS 0 16384 lo0
 10.0.1.64/28 link#15 U 14864827 1500 em2.104
 10.0.1.78 link#15 UHS 0 16384 lo0
 10.0.1.80/28 link#16 U 87763530 1500 em2.105
 10.0.1.94 link#16 UHS 0 16384 lo0
 10.0.1.96/28 link#17 U 0 1500 em2.106
 10.0.1.110 link#17 UHS 0 16384 lo0
 10.0.1.112/28 link#18 U 0 1500 em2.107
 10.0.1.126 link#18 UHS 0 16384 lo0
 10.0.1.128/28 link#19 U 13693489 1500 em2.108
 10.0.1.142 link#19 UHS 0 16384 lo0
 10.0.1.144/28 link#20 U 747606 1500 em2.109
 10.0.1.158 link#20 UHS 0 16384 lo0
 10.0.1.160/28 link#21 U 15640132 1500 em2.110
 10.0.1.174 link#21 UHS 0 16384 lo0
 10.0.1.176/28 link#22 U 10033377 1500 em2.111
 10.0.1.190 link#22 UHS 0 16384 lo0
 10.0.1.192/28 link#23 U 11 1500 em2.112
 10.0.1.206 link#23 UHS 0 16384 lo0
 10.0.1.208/28 link#24 U 0 1500 em2.113
 10.0.1.222 link#24 UHS 0 16384 lo0
 10.0.1.224/28 link#25 U 0 1500 em2.114
 10.0.1.238 link#25 UHS 0 16384 lo0
 10.0.1.240/28 link#26 U 0 1500 em2.115
 10.0.1.254 link#26 UHS 0 16384 lo0
 10.0.2.0/28 link#27 U 0 1500 em2.116
 10.0.2.14 link#27 UHS 0 16384 lo0
 10.0.2.16/28 link#28 U 0 1500 em2.117
 10.0.2.30 link#28 UHS 0 16384 lo0
 10.0.2.32/28 link#29 U 0 1500 em2.118
 10.0.2.46 link#29 UHS 0 16384 lo0
 10.0.2.48/28 link#30 U 0 1500 em2.119
 10.0.2.62 link#30 UHS 0 16384 lo0
 10.0.2.64/28 link#31 U 0 1500 em2.120
 10.0.2.78 link#31 UHS 0 16384 lo0
 10.0.2.80/28 link#32 U 0 1500 em2.121
 10.0.2.94 link#32 UHS 0 16384 lo0
 10.0.2.96/28 link#33 U 0 1500 em2.122
 10.0.2.110 link#33 UHS 0 16384 lo0
 10.0.2.112/28 link#34 U 0 1500 em2.123
 10.0.2.126 link#34 UHS 0 16384 lo0
 10.0.2.128/28 link#35 U 0 1500 em2.124
 10.0.2.142 link#35 UHS 0 16384 lo0
 10.0.2.144/28 link#36 U 0 1500 em2.125
 10.0.2.158 link#36 UHS 0 16384 lo0
 10.0.2.160/28 link#37 U 0 1500 em2.126
 10.0.2.174 link#37 UHS 0 16384 lo0
 10.0.2.176/28 link#38 U 0 1500 em2.127
 10.0.2.190 link#38 UHS 0 16384 lo0
 10.0.2.192/28 link#39 U 0 1500 em2.128
 10.0.2.206 link#39 UHS 0 16384 lo0
 10.0.2.208/28 link#40 U 0 1500 em2.129
 10.0.2.222 link#40 UHS 0 16384 lo0
 10.0.2.224/28 link#41 U 0 1500 em2.130
 10.0.2.238 link#41 UHS 0 16384 lo0
 10.0.2.240/28 link#42 U 0 1500 em2.131
 10.0.2.254 link#42 UHS 0 16384 lo0
 10.0.3.0/29 link#43 U 3877802 1500 em2.132
 10.0.3.6 link#43 UHS 0 16384 lo0
 10.0.3.8/29 link#44 U 3939412 1500 em2.133
 10.0.3.14 link#44 UHS 0 16384 lo0
 10.0.3.16/29 link#45 U 15005758 1500 em2.134
 10.0.3.22 link#45 UHS 0 16384 lo0
 10.0.3.24/29 link#46 U 325012 1500 em2.135
 10.0.3.30 link#46 UHS 0 16384 lo0
 10.0.3.32/29 link#47 U 4456046 1500 em2.136
 10.0.3.38 link#47 UHS 0 16384 lo0
 10.0.3.40/29 link#48 U 2932343 1500 em2.137
 10.0.3.46 link#48 UHS 0 16384 lo0
 10.0.3.48/29 link#49 U 2125567 1500 em2.138
 10.0.3.54 link#49 UHS 0 16384 lo0
 10.0.3.56/29 link#50 U 1633429 1500 em2.139
 10.0.3.62 link#50 UHS 0 16384 lo0
 10.0.3.64/29 link#51 U 1556704 1500 em2.140
 10.0.3.70 link#51 UHS 0 16384 lo0
 10.0.3.72/29 link#52 U 792059 1500 em2.141
 10.0.3.78 link#52 UHS 0 16384 lo0
 10.0.3.80/29 link#53 U 1133122 1500 em2.142
 10.0.3.86 link#53 UHS 0 16384 lo0
 10.0.3.88/29 link#54 U 0 1500 em2.143
 10.0.3.94 link#54 UHS 0 16384 lo0
 10.0.3.96/29 link#55 U 2615458 1500 em2.144
 10.0.3.102 link#55 UHS 0 16384 lo0
 10.0.3.104/29 link#56 U 0 1500 em2.145
 10.0.3.110 link#56 UHS 0 16384 lo0
 10.0.3.112/29 link#57 U 0 1500 em2.146
 10.0.3.118 link#57 UHS 0 16384 lo0
 10.0.3.120/29 link#58 U 0 1500 em2.147Thanks for your help. 
- 
 yesss, all clear. My problem is that I have a new customer that have a LAN network 192.168.1.0/24 that I will have to reach from Pfsense - and our networks above - So I hope that the ISP router does not intercept them, but that I will reach that network via Ovpn Client. Regards 
- 
 @giuliolinux said in Automatically routed to ISP router Private IP if a client VPN is active: My problem is that I have a new customer that have a LAN network 192.168.1.0/24 that I will have to reach from Pfsense That's the thing I was missing before. I guess, the customer is connected via an OpenVPN site-to-site. So add 192.168.1.0/24 to the "Remote Networks" in your pfSense VPN settings. There is nothing, the ISP can do for achieve access to this customer. 
 As said, if pfSense has no other route it directs destination IPs to the default gateway.
- 
 Ok, thanks for your precious help, and in any case sorry for my approx english ;P Ciao (form Italy)