Not pinging Netgate Vlan's
-
Vlan 10,20, 30 tagged
-
@afcarvalho Go to interfaces/Switches.
Post a pic of that.Did you check the link I posted? You'll probably be able to figure it out if you look at the instructions.
-
Yes, almost certainly a missing option(s) in the switch config.
-
@jarhead I did look.
gi1/0/1 defined as trunk
gi1/0/2 defined with Vlan 10 switchport access
range gi1/0/3-6 with Vlan 20 switchport access
range gi1/0/7-24 with Vlan 30 switchport accessCant't figure out why is the glitch...
A
-
Sorry, I meant the internal switch in the 1100. What does Interfaces > Switches > VLANs show?
-
It's needs to have VLANs 10, 20 and 30 there with ports 0 and (probably) 2 as tagged members.
-
@afcarvalho said in Not pinging Netgate Vlan's:
@jarhead I did look.
gi1/0/1 defined as trunk
gi1/0/2 defined with Vlan 10 switchport access
range gi1/0/3-6 with Vlan 20 switchport access
range gi1/0/7-24 with Vlan 30 switchport accessCant't figure out why is the glitch...
A
Yeah, I think you're confusing the switches. That article is referring to the internal switch in the 1100, not your switch.
Again, Interfaces/Switches in pfSense. Make sure you keep 0t on any ports you change. -
-
Ok that should work as long as the Cisco switch is connected to port 2 (LAN). Is it not?
How exactly are you testing?
-
@stephenw10 It's connected to Netgate port 2
I can't access Negate from the switch...
That's the problem.
A
-
Which IP?
How exactly are you testing that?
-
@stephenw10 192.168.104.2 - Cisco Switch IP
192.168.104.1 Netgate -
Netgate port 2 Cable to GI1/0/1 in Cisco Switch configured as trunk
PC connected to gi1/0/11 in Cisco Switch configured as Vlan 30A
-
@afcarvalho said in Not pinging Netgate Vlan's:
I can't access Negate from the switch...
So you are trying to ping 192.168.104.1 from the switch CLI?
What error is shown?
-
-
One other strange thing:
NTP isformation is wrong! -
It has no WAN connection and the 1100 has no battery backed RTC so it uses the most recent file timestamp.
What are you pinging from there? Clearly not the switch.
What IP address is that? Is that a static IP? How is it connected?
How are you connecting the the pfSense GUI? From a different workstation?
-
@afcarvalho Are you sure you have the WAN and LAN connected correctly? Almost seems like they may be reversed.
As Stephen said, no internet connection there. See where it says Can't check for updates, dead give away.
Also, post the G1/0/1 config. -
@jarhead I have no Wan connected.
I have one PC that I connect via one usb c adapter.
And I have a Wifi connection on that the PC that connects to the net.
That's what I am using to answer in this communication.
When I connect the PC directly to the Negate, it works fine.
The Netgate has the Lan port 192.168.104.1
The Netgate has one Vlan (30) with 172.168.108.1 as static IP and a DHCP service serving 172.168.108.100 to 172.168.100.200.A
-
@afcarvalho
You're getting very confusing now.
If you don't have a WAN connected, why would you think the NTP would be correct??What does "When I connect the PC directly to the Negate, it works fine." mean?
Do you mean you can ping all vlan interfaces?Post the G1/0/1 config.