Not pinging Netgate Vlan's
-
@jarhead Configuring the Vlan 30 on the adapter and connecting directly do the Netgate Lan port, works.
A
-
@afcarvalho Hmm, so then the problem is actually the cisco switch. Might wanna post all the pertinent config from it.
-
Yup, must be the Cisco switch.
You could test the other VLANs connected directly to the 1100 but since they are configured identically I have no doubt they would also work.
Unfortunately you're at the edge of my Cisco switch knowledge here.
Steve
-
@stephenw10 Thank you very much Steve.
Your patience thershold is a must.
And you helped a lot.Adriano
-
@jarhead Thank you very much for your resilience.
I'm gonna look for expertise in Cisco Switchs.Adriano
-
@afcarvalho
Try this on the g1/0/1switchport trunk encapsulation dot1q
-
@jarhead I'll try and return to you.
A -
@afcarvalho The Cisco Switch doesn't recognize the command.
-
@afcarvalho problem solved
dhcp in cisco switch configures as relayA
-
@afcarvalho Many thanks to @jarhead and @stephenw10 for their infinite patience with me.
A
