Assign VLAN on LAGG from Console

[asage]

I don't know if I'm doing something wrong but I'm unable to configure VLANs on my LAGG (simple fail over) through the console. I found an open issue from 13 years ago that describes my problem https://redmine.pfsense.org/issues/336 The web GUI as the LAGG available for assignment but console does not. Manually typing the LAGG interface name does not work.

A little back info: I have a 2 port SFP+ Intel NIC that I'm plugging in to 2 unstacked switches. Ideally I'd like to use LACP across them but my switches don't support it. I want to use 1 interface for both WAN and LAN (on separate VLANs) that is set up in a fail over LAGG configuration. Having the console be able to configure LAGG VLANs is important because unless you have an opt interface when you turn on LAGG for all interfaces the box is inaccessible until you assign the VLANs to the LAGG.