Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Can’t add interface to dataplane

    Scheduled Pinned Locked Moved Problems Installing or Upgrading TNSR Software
    2 Posts 2 Posters 667 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mloiterman
      last edited by mloiterman

      I’ve got an Aquantia AQC107 that I’m trying to add to the dataplane without much success.

      DPDK website shows that the card is supported by the atlantic driver. And, the card is indeed seen by DPDK. But it’s also seen by the host. Even though I’ve set the card to down and /etc/netplan/00-installer-config.yaml doesn’t contain an entry for the device the host still sees it as ens1. DPDK sees the card, but says it is an active interface. This prevents me from adding it to the dataplane.

      I do have several other Intel NICs that I have successfully added to the dataplane but they’re all using
      igb_uio or vfio-pci drivers.

      Are you able to use a mix of drivers like this? If so, how can I prevent the host from trying to use the card?

      R 1 Reply Last reply Reply Quote 0
      • R
        ruuqofaroth @mloiterman
        last edited by

        @mloiterman I was never able to get the AQC107 card working in my box, as it doesn't seem supported by the DPDK version used in the current TNSR release. I ended up running ESXi on the router, and using VMXNET3 adapters for all NICS (other card for LANs is an X710-T4L) and that worked for me without a speed hit.

        This allowed the AQC107 card to use it's 5Gbps speeds, which I needed for AT&T Fiber.

        1 Reply Last reply Reply Quote 1
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.