pfBlockerNG sync not working
-
@fmroeira86 AFAIK the only difference right now is the typo fix mentioned above.
You can just uninstall devel and install normal to change.
https://docs.netgate.com/pfsense/en/latest/releases/23-01.html
“The pfBlockerNG package has been updated to match pfBlockerNG-devel. After upgrade it is safe to uninstall pfBlockerNG-devel (keeping settings) and install pfBlockerNG instead.” -
@fmroeira86 said in pfBlockerNG sync not working:
Are there currently differences between the devel version and the normal version? I recall there were some years ago. If I decide to switch to the normal version, what procedure should I follow to ensure the continuity of settings?
Thank you so much!
Thank you!
Just swaped to the regular version without any problem only by installing it.
It did uninstall the devel version and all configurations remained untouched :)
Cheers!
-
@SteveITS Just wanted to note I finally got around to testing this in regards to syncing and learned the following:
- Update and Cron on Firewall 1 does not sync
- Update, Cron, and Reload on Firewall 2 does not sync
- Reload on Firewall 1 does sync
So, basically as you said, a force reload must happen on Firewall 1 to get the sync to happen.
-
S SteveITS referenced this topic on
-
M markdavis referenced this topic on
-
@planedrop said in pfBlockerNG sync not working:
So, basically as you said, a force reload must happen on Firewall 1 to get the sync to happen.
@BBcan177 The help says:
Setting changes are applied via CRON or 'Force Update|Reload' only!which is not true at this point.
-
@Bob-Dig I think that’s more in terms of “make changes, click Apply to activate” as with rules, service config, etc. However all those other pfSense settings sync automatically unless unchecked in the HA settings.
If that’s the intent though, the text could be updated to say :
“Setting changes are applied via CRON or 'Force Update|Reload' only!
Settings sync to the HA secondary only via Force Update”
…so it’s at least obvious it’s different from other packages/pfSense.
-
@SteveITS @Bob-Dig @planedrop Forgive my re-iteration on this sync issue but I insist for clarification purposes: the pfblocker package using a seperate and indipendant sync method doesn't rely on pfSense's native HA sync between nodes, it uses what I see as a basic "copy XML over to slave by cron job script" method which you specify in the package's sync page configuration. So if you happen to modify anything on the master node in pfblocker this will never trigger an immediate sync as with any other service in/of pfsense - it will only trigger every time cron is run (hourly). If you want to force it, then you have to issue a Force-reload. A normal reload will not copy the XML over to the slave. This is a "by design" behavior from what I can see - be it correct or not is another debate though and maybe this can be rectified. I have always been using the -devel version from the start so I don't know if the standard version behaves differently but I highly doubt it. Maybe @BBcan177 can shed some further light on the matter, but this is how I see the whole sync works with pfBlocker-devel.
-
@IT_Luke said in pfBlockerNG sync not working:
it will only trigger every time cron is run (hourly).
No, it will only work on a forced reload. If you don't do that it will never be copied over.
-
@Bob-Dig Let me verify this on one of my nodes - will get back to you.
-
@IT_Luke said in pfBlockerNG sync not working:
will get back to you.
Do that. I have no problem with this behavior, kinda like it. But it should be mentioned there correctly.
-
@IT_Luke Just to clarify, I do not think it was always this way. I just do not know when the behavior changed. We've had pfB in HA for like 9 years now.
-
@Bob-Dig I confirm the failure to sync the updates from the Master at cron sync time (it only syncs with a forced-reload). Something is definitely broken with the change config detection. Will try to snoop around the .inc file and see if there's anything that stands out.
-
@SteveITS I've been using it more or less 6 years I guess and ever since the sync was always cron based (not pushed at the change moment like the native HA sync). I have always been using the devel version as I started using this for the extra features and stuck to it. I guess that possibly some time earlier the XML config sync may have been done differently - I have no idea though it appears awkward to me that the dev would revert to a cron based sync. I recall initially this was even buggy (like it is now!) in that for some reason it would ignore the configured slave node and adding it twice would make it work (apparently this was fixed). In general, while pfblocker is a great and valueable add, it has never excelled in this feat unfortunately.
-
@Bob-Dig @SteveITS I have taken some time to look into the pfblockerng.php and .inc files more in depth and (take this with a grain of salt) there is no calling the XML RPC with the normal update nor cron update (manual or scheduled). The only time the XMLRPC sync function is called is when there is a manual force-reload so it seems this is behavior "by design". However it is possible to add a variable in the array such as "sync_needed" every time the config changes and the user saves the changes (list order, update frequency etc). If the user then does not force a reload, the normal cron job (which calls the function pfblockerng_sync_cron() ) should check if this flag has been set and if so call the XMLRPC Sync function and reset the flag to 0. This way, if one does apply changes and forgets to execute a manual force reload the changes do get synched over to the slave where it will pick them up at next cron run. It is not a major modification and I'm sure @BBcan177 can implement it if requested. I will run some tests on a HA pair when I have more time and see if I can get this functionality working the way I'd like and keep you updated.
-
@IT_Luke Yay for open source. :) I'd try to help but I have a large programming project that moved up from summer to 3 weeks from now. ٩(͡๏̯͡๏)۶
-
@SteveITS @Bob-Dig ok so after doing some tests I I think I have found a very simple yet effective way of getting the Slave node synched without major modifications to the code for the moment and it seems to work fine for me. In short there is just one line to add so that the config is synched over to the slave every time the cron function is run or every time you select to run cron manually. This means that any changes you make to your lists whether ipv4 or DNSBL will be synced over every hour if you forget to sync it manually. I have placed the XMLRPC sync call at the very beginning of the cron function so that when they both run simultaneously on the nodes the slave node should already have received the updated config (but that really depends on their clock sync so it's not) and use that as base of the list updates and avoid missing firewall rule matches. In any case it would fix them at the next run, though you would get the notification which is normal. In order to avoid this with certainty a cron offset of a few minutes should e introduced on all slave HA nodes (similarly to the CARP Skew concept) so that the updated XML config is definitely received before the slave cron update process begins. This should be the orginal behavior of the list update method though I cannot vouch for it as I did not see any way the cron update would run the XMLRPC sync function apart from running a "force update all". In the case of a slave node the mod/patch won't do anything as the function already implements checking if there is a sync target configured or not, and if not just exits.
All you need to do is to add the following at line 544 (which should be blank) to the pfblockerng.php file under /usr/local/www/pfblockerng/ :
pfblockerng_sync_on_changes(); // Sync config to HA slave @cron time to ensure config alignmentFeel free to try and see how it works for you.
-
S SteveITS referenced this topic on
-
Looks like it's line 541 in the new version:
// Function to update Lists/Feeds as per Cron
function pfblockerng_sync_cron() {
global $config, $pfb, $pfbarr;
pfblockerng_sync_on_changes(); // Sync config to HA slave @cron time to ensure config alignment
$hour = date('G');
$dow = date('N'); -
@SteveITS Yep - or line 547 - as long as it's at the beginning of the function!
A few lines have been added/modified around line 492 for the extra Maxmind ID requirement. -
S SteveITS referenced this topic on
-
@Bob-Dig @SteveITS FYI I noticed (alas) that the latest pfBlocker 3.2.0_17 update after the 3.2.0_9 shenanigans still doesn't have the HA sync fix so if you change any settings on the HA Master node in pfB they won't be synched to the slave node @cron time (only if you do a full Reload manually which is not ideal). The line number where to insert the fix is still the same (541 - should be empty) as before so that hasn't changed:
pfblockerng_sync_on_changes(); // Sync config to HA slave @cron time to ensure config alignment
I thought BBCan would have implemented this by now, any idea what goes?
-
@IT_Luke Glad you revived this thread, I am seeing the same thing as well, noticed it last week when I was doing some big changes and nothing synced over.
Force reload always fixes it though. Still annoying to have to go in and do it.
-
@planedrop You can always (re)apply the one liner fix to the pfblockerng.php file under /usr/local/www/pfblockerng/ on the Master node. Haven't had any issues since.
