Assist with firewall rule for accessing devices on other VLAN?
-
I have two VLANs so far. I am using the default VLAN 1 (not sure if this is still considered a VLAN since its the actual LAN port) for my Pfsense and managed swtich. Anyhow network management devices will be on this default VLAN 1 and my workstations will be on VLAN 50. I am able to access the Pfsense firewall on VLAN 1 from VLAN 50 but cant get any further than that. Everytime I plug my workstation into VLAN 50 I no longer have access to the swtich. I created what I thougtht were firewall rules that would allow this communication on each interface but obviously I am missing something. Suggestion please?
-
@imv8n hey there,
Seems you can reach vlan1 from vlan 50 (reaching pfsense)...
So, what switch are you using? Do you need to configure that switch? Here I use cisco soho switches. You nned to configure those so that other devices (IPs) are allowed to get to the gui of the switch. This has to be configure on the switch itself...
